Abdel Wahab, Magd

English

Ghent University Academic Bibliography

          International Journal of Fracture Fatigue and Wear:   Conference Series proceedings Volume 4, 2016       Published by Laboratory Soete – Ghent University Technologiepark Zwijnaarde 903 B-9052 Zwijnaarde, Belgium http://www.soetelaboratory.ugent.be/ Edited by: Professor Magd Abdel Wahab ISSN: 2294-7868 Proceedings of 5th International Conference on Fracture Fatigue and Wear, FFW 2016, Kitakyushu, Japan, 24-26 August 2016 International Journal of Fracture Fatigue and Wear, Volume 4 ii  5th International Conference on Fracture Fatigue and Wear, FFW 2016, Kitakyushu, Japan, 24-26 August 2016  Chairman Professor Magd Abdel Wahab Laboratory Soete, Ghent University  Belgium  Co-chairman Professor Nao-Aki Noda Kyushu Institute of Technology  Japan   Local Organizing Committee Prof. N-A Noda, Kyushu Institute of Technology, Japan Prof. H Sakamoto, Kumamoto University, Japan Prof. M Endo, Fukuoka University, Japan Prof. M Goto, Oita University, Japan Prof. C Makabe, University of Ryukyu, Japan Prof. A Saimoto, Nagasaki University, Japan Prof. K Oda, Oita University, Japan  Prof. G Hotta, National Institute of Technology, Ariake College, Japan Prof. T Miyazaki, University of Ryukyu, Japan Prof. K Ushijima, Tokyo University of Science, Japan Dr. Y Sano, Kyushu Institute of Technology, Japan Prof. S Nishida, Saga University, Japan Dr. K Masuda, University of Toyama, Japan Dr. Y Takase, Kyushu Institute of Technology, Japan  International Scientific Committee  Prof. S Abdullah,   Universiti Kebangsaan Malaysia, Malaysia Dr. J Abenojar, Universidad Carlos III de Madrid, Spain Prof. D Bigoni, University of Trento, Italy Dr. H Boffy, University of Twente, Netherlands Prof. S Bordas,  University of Luxembourg, Luxembourg  Dr. R Das, University of Auckland, New Zealand Dr.  A Ertas,   Karabuk University, Turkey Dr. S Fouvry, Ecole Centrale de Lyon, France Prof.  T Hattori, Shizuoka Institute of Science and Technology, Japan Dr. K Masuda, University of Toyama, Japan    Prof. T Miyazaki, University of Ryukyu, Japan Prof. K Oda, Oita University, Japan  Prof. RV Prakash, Indian Institute of Technology, India Prof. T Qin, China Agricultural University, China Prof. F Rezai-Aria, Ecole des Mines d'Albi, France Dr. A Rudawska, Lublin University of Technology, Poland Dr. Y Sano,  Kyushu   Institute  of  Technology, Japan Prof. J Song, Ostwestfalen-Lippe University, Germany Prof. J Toribio, University of Salamanca, Spain Prof. C Xu,  China Agricultural University, China Prof C Zhou,  Nanjing University of Aeronautics and Astronautics, China International Journal of Fracture Fatigue and Wear, Volume 4 iii  Editorial  The fourth volume of the International Journal of Fracture Fatigue and Wear contains the proceedings of the fifth International Conference of Fracture Fatigue and Wear (FFW) held in Kitakyushu, Japan, 24-26 August 2016.  The organising committee is grateful to Professor Toshio Hattori, Department of Mechanical Engineering, Faculty of Science and Technology, Shizuoka Institute of Science and Technology, Japan, for agreeing to deliver the keynote lecture, entitled ‘Fatigue process, stress analysis and strength evaluation’, at the opening of the conference.  The sponsorship of Soete laboratory, Ghent University (Belgium), Kyushu Institute of Technology (Japan) and several Japanese companies is highly appreciated.  Most of the papers published in this volume have been sent to reviewers, who are members of Scientific Committee of FFW 2016, to judge their scientific merits. Based on the recommendation of reviewers and the scientific quality of the research work, the papers were accepted for publication in the conference proceedings and for presentation at the conference venue. The organizing committee would like to thank all members of Scientific Committee for their valuable contribution in evaluating the papers. The efforts of the local organizers of FFW 2016 at Kyushu Institute of Technology, Japan, the team of Professor Nao-Aki Noda, are highly acknowledged.  Finally, the editor would like to thank to all authors, who have contributed to this volume and presented their research work at FFW 2016.      The Editor Professor Magd Abdel Wahab                       International Journal of Fracture Fatigue and Wear, Volume 4 iv  Table of Contents  Fatigue crack onset detection and observation at high temperature on notched cobalt-base superalloy specimens and fatigue lifetime prediction D. Lévêque, V. Marcadon, E. Pereira, T. Journot, P. Kanouté and A. Gaubert 1-7 Analysis of fracture growth in the laser peeling of ultra-thin glass T.-C. Chiu, C.-A. Hua, C.-H. Wang, T.-S. Chang, K.-S. Chen, T.-S. Yang, C.-D. Wen, C.-H. Li, M.-C. Lin, C.-J. Huang and K.-T. Chen 8-14 Fracture behaviour observation of metal laminates of high-strength steel and AL7075-T6 at different high-velocity projectile N. A. Rahman, S. Abdullah, W. F. H. Zamri, M. F. Abdullah, M. Z. Omar and Z. Sajuri 15-20 Charactering self magnetic flux leakage associated to biaxial fatigue life estimation using weibull-based method S.A.N. Mohamed, A. Arifin, S. Abdullah and A.K. Ariffin 21-26 Fracture behaviour investigation of az31b magnesium alloy with carbon-nanotube and lead reinforcement using a gas gun system M.F. Abdullah, S. Abdullah, M.S. Risby, M.Z. Omar, Z. Sajuri  27-32 Effects of heterogeneous precipitates on fatigue behavior of age-hardened cu-ni-si alloy T. Fujimura, M. Goto, S.Z. Han, T.Yamamoto, J.H. Ahn, J. Kitamura and D.Okuzume 33-38 Dry friction and wear properties in micro-scale reciprocating sliding contact of high carbon-chromium bearing steel Y. Tanaka, M. Endo and S. Moriyama 39-44 Consideration for suitable length of small crack to evaluate fractuer strength for v-notched plate K. Oda, N. Tabe, S. Shimoda, M. Hara and N. Tsustumi  45-49 Elastoplastic fretting wear behaviour of contact wires T. Yue, D. Wang and M. Abdel Wahab  50-57 Finite element simulations of the effect of friction coefficient in fretting wear T. Yue and M. Abdel Wahab  58-63 Nonlinear transient isogeometric analysis of laminated composite plates based on higher order plate theory Loc V. Tran, P. Phung-Van, H. Nguyen-Xuan and M. Abdel Wahab 64-69 Nonlinear control of smart plates using isogeometric analysis P. Phung-Van, Loc V. Tran, H. Nguyen-Xuan and M. Abdel-Wahab 70-77 A review on fretting fatigue crack initiation criteria N.A. Bhatti and M. Abdel Wahab 78-85 International Journal of Fracture Fatigue and Wear, Volume 4 v  Predicting residual stress in welds using empirical and reconstructive methods J. Ni and M. Abdel Wahab  86-92 Effects of graphite and artificial defects on the fatigue strength of ferritic-pearlitic ductile cast iron T. Deguchi, T. Matsuo, S. Takemoto, T. Ikeda and M. Endo  93-98 Evaluation of adhesive strength based on the intensity of singular stress field of single lap joint R. Li, N.A. Noda, Y. Sano, T. Miyazaki, K. Iida and Y. Takase 99-103 T convenient debonding strength evaluation for spray coating based on intensity of singular stress Z. Wang, N.A. Noda, Y. Sano, Y. Takase and K. Iida  104-108 Design and performance of honeycomb structure for nanobubbles generating apparatus Nao-Aki Noda, Fei Ren, Wataru Yamamoto, Yoshikazu Sano, Dai-Hen Chen and Yuuji Yonezawa 109-113 Influence of strain rate for notch- bend strength on ductile cast iron T. Ikeda, T. Umetani, N. Kai, N-A. Noda and Y. Sano 114-119 Effect of low-pressure plasma treatment on surface modification and friction coefficient of poly-(methyl-methacrylate) J. Abenojar, P. Gálvez and M.A. Martínez 120-125 Contact area actual self-friction in polyolefins M.A. Martinez and J. Abenojar 126-132 Study on test of fatigue crack growth rate along the weld line Z. Qian and R. Zhang 133-138 Fatigue analysis of an aluminium Alloy Wheel in the Dynamic Radial fatigue test by using Finite Element Analysis W. Phusakulkajorn, R. Naewngerndee, S. Sucharitpwatskul, A. Malatip and S. Otarawanna 139-145 Bending fatigue strength of annealed 0.45% carbon steel specimens finished by cutting and rubbing techinque utilizing cemented carbide tip T. Yakushiji, F. Nakagawa and M. Goto  146-152 Loading frequencies effects on the oxide-induced crack closure in extremely low stress intensity factor range K. Tazoe, M. Oka and G. Yagawa 153-157 Fretting wear and fretting corrosion of electrical contacts Haomiao Yuan, Jian Song and Vitali Schinow 158-165 Analysis of intensity of singular stress field for bonded cylinder under bending load T. Miyazaki and N. -A. Noda  166-171 Fatigue behavior of flexurally strengthened FRP concrete structures H. A. Toutanji, R. Vuddandam, D. Wang, M. Hussak 172-177 Fatigue crack growth behavior of specimen with grooves cut along loading direction C. Makabe 178-183 International Journal of Fracture Fatigue and Wear, Volume 4 vi  Non-ductile failure analysis of steam generator tube sheet based on different standards and codes Chang Liu, Hao Qian, Xingyun Liang and Yongcheng Xie  184-193 Estimation of the maximum bending moment of U-section beams K. Masuda  194-199 Structural health monitoring using transmissibility coherence Yun-Lai Zhou, Xiaobo Yang and Magd Abdel Wahab 200-203 Parallelization approaches for fretting fatigue simulation R. Trobec, M. Depolli, G. Kosec, S. Bordas, S. Tomar, K. Pereira and M. Abdel Wahab 204-208 Desired fatigue design code for railroad truck frame Haruo Sakamoto 209-215 Mechanical properties of steel fibre reinforced polymer composites W. N. M. Jamil, Z. Sajuri, M. A. Aripin, S. Abdullah, M. Z. Omar, M.F. Abdullah and W. F. H. Zamri 216-222 Effect of hydrogen on void initiation of carbon steel N. Tsutsumi, S. Matsuo and K. Oda  223-227 Cyclic cohesive zone models and its applicability to fretting fatigue crack propagation K. Pereira, S. Bordas, S. Tomar, R. Trobec, M. Depolli, G. Kosec, M. Abdel Wahab 228-233 Fatigue crack growth studies on plain concrete by considering the process zone mechanisms Keerthy M. Simon and J.M. Chandra Kishen 234-240 Relationship between fracture pattern and debonding  strength of single lap joints K. Ota, S. Takubo and G. Hotta 241-245  

International journal of fracture fatigue and wear

https://biblio.ugent.be/publication/7274827/file/7283985

International journal of fracture fatigue and wear

Abstract

Similar works

Full text

Available Versions

Ghent University Academic Bibliography