Prototyping micro-optical components with integrated out-of-plane coupling structures using deep lithography with protons: art. no. 618504

Abstract

We present Deep Lithography with Protons (DLP) as a rapid prototyping technology to fabricate waveguide-based micro-optical components with monolithically integrated 45 degrees micro-mirrors acting as out-of-plane couplers, splitting the optical signal in 3 separated paths. For the first time, two different proton beam sizes are used during one irradiation and a 20 mu m collimating aperture is chosen to accurately define the out-of-plane coupling structures. We fully optimized the DLP process for this 20 mu m proton beam and we measured the surface roughness (R-q=27.5nm) and the flatness (R-t=3.17 mu m) of the realized components. Finally, we experimentally measured the optical transmission efficiency of the micro-optical splitter component. The results are in excellent agreement with non-sequential ray-tracing simulations performed for the design. Above that, we present a pluggable out-of-plane coupler incorporating a single micro-mirror for the 90 degrees coupling of light to or from polymer multimode waveguides integrated on a printed circuit board (PCB). This millimeter-sized mass-reproducible component can then be readily inserted into laser ablated cavities. Non-sequential ray-tracing simulations are performed to predict the optical performance of the component, showing coupling efficiencies up to 78%. These results are then experimentally verified using piezo-motorized positioning equipment with submicron accuracy in a multimode fiber-to-fiber coupling scheme, showing coupling efficiencies up to 56%. The fabricated coupling components are suitable for low-cost mass production since our micro-optical prototyping technology is compatible with standard replication techniques, such as hot embossing and injection molding, has been shown before