research article

Identificación de posibles prospectos geotérmicos utilizando álgebra de mapas en la porción central del Estado de Hidalgo, México

Abstract

Geothermal resources are known for their most common thermal manifestations: hot springs. Currently, in the state of Hidalgo, geothermal energy is limited to the direct use of balneology, however, it is not the only application from which some socio-economic benefit can be obtained. Generating electricity from the Earth's internal heat is the process of greatest benefit from geothermal energy since the end of the 20th century. In Mexico, the first geothermal plant was installed in the Pathé community, in the state of Hidalgo; Since then and until today, the field of exploration towards geothermal energy has been extended, establishing up to now 5 geothermal plants throughout the country with a net capacity of 950 MW. There are few investigations directed to geothermal exploration in Hidalgo, for this reason, a methodology is proposed to locate the geothermal potential found in the region by means of a qualitative analysis with those variables that favor the accumulation of geothermal energy, these variables are: geomorphology, geology, chrono-stratigraphy, heat flow and geophysics, using Geographical Information Systems (GIS) and potential methods. The study area is the state of Hidalgo, but those areas of lesser relevance were discriminated allowing the delimitation of a particular area, this area was called geothermal play, which is located in the central portion of the state. The area covers approximately 7200 km2 with a length close to 170 km and is distributed with a preferential northwest-southeast direction (NW-SE). In order to determine the potentially geothermal areas, the Weighted Sum method was used through map algebra to obtain a geothermal potential index, this method allows the assignment of weights according to the degree of relevance for the accumulation of geothermal energy from of a previous reclassification of the analyzed variables. With the results of this research, a map was designed that shows the areas with the lowest and highest geothermal potential, and thus, provide information to the geothermal industry, generating information that will be useful for prospecting this resource and its future application in the energy sector.Los recursos geotérmicos son conocidos por sus manifestaciones térmicas más comunes: manantiales termales. Actualmente, en el estado de Hidalgo la geotermia está limitada al uso directo de la balneología, sin embargo, no es la única aplicación de la que se puede obtener algún beneficio socio-económico. La generación de electricidad a partir del calor interno de la Tierra es el proceso de mayor beneficio de la geotermia desde finales del siglo XX. En México la primera planta geotérmica se instaló en la comunidad de Pathé, en el estado de Hidalgo;desde entonces y hasta la actualidad, el campo de exploración hacia la geotermia se extendió, estableciendo hasta el momento 5 plantas geotérmicas en todo el país con una capacidad neta de 950 MW. Existen pocas investigaciones dirigidas a la exploración geotérmica en Hidalgo, por esta razón, se propone una metodología para localizar el potencial geotérmico que se encuentra en la región por medio de un análisis cualitativo con aquellas variables que favorecen la acumulación de energía geotérmica, estas variables son: geomorfología, geología, crono-estratigrafía, flujo de calor y geofísica, utilizando Sistemas de Información geográfica (SIG) y métodos potenciales. El área de estudio es el estado de Hidalgo, pero se discriminaron aquellas zonas de menor relevancia permitiendo la delimitación de una zona en particular, esta zona se denominó “play geotérmico”, la cual se localiza en la porción central del estado. La zona cubre aproximadamente 7200 km2 con una longitud cercana a los 170 km y se distribuye con una dirección preferencial noroeste-sureste (NW-SE). Con el fin de determinar las zonas potencialmente geotérmicas se utilizó el método de Suma Ponderada por medio de algebra de mapas para obtener un índice de potencial geotérmico, este método permite la asignación de ponderaciones según el grado de relevancia para la acumulación de energía geotérmica a partir de una previa re-clasificación de las variables analizadas. Con los resultados de esta investigación se diseñó un mapa que muestra las zonas de menor y mayor potencial geotérmico, y así, aportar información a la industria geotérmica que será de utilidad para la prospección de este recurso y su futura aplicación en el sector energético

    Similar works