In this work the design of a constant fraction discriminator (CFD) to be used in the VFAT3 chip for the read-out of the triple-GEM detectors of the CMS experiment, is described. A prototype chip containing 8 CFDs was implemented using 130 nm CMOS technology and test results are shown. © CERN 2016

Abbaneo, D.

Abbas, M.

Abbrescia, M.

Abdelalim, A. A.

Aboamer, O.

Acosta, D.

Ahmad, A.

Ahmed, W.

Akl, M. Abi

Aleksandrov, A.

Altieri, P.

Aly, R.

Asawatangtrakuldee, C.

Aspell, P.

Assran, Y.

Awan, I.

Bally, S.

Ban, Y.

Banerjee, S.

Baranac, A. Puig

Barashko, V.

Barria, P.

Bencze, G.

Beni, N.

Benussi, L.

Bhopatkar, V.

Bianco, S.

Bos, J.

Bouhali, O.

Braghieri, A.

Braibant, S.

Buontempo, S.

Calabria, C.

Caponero, M.

Caputo, C.

Cassese, F.

Castaneda, A.

Cauwenbergh, S.

Cavallo, F. R.

Celik, A.

Choi, M.

Choi, S.

Christiansen, J.

Cimmino, A.

Colafranceschi, S.

Colaleo, A.

Czellar, S.

Dabrowski, M. M.

De Robertis, G.

Dildick, S.

Dorney, B.

Elmetenawee, W.

Endroczi, G.

Errico, F.

Fenyvesi, A.

Ferry, S.

Furic, I.

Garcia, A. Conde

Giacomelli, P.

Gilmore, J.

Golovtsov, V.

Guiducci, L.

Guilloux, F.

Gutierrez, A.

Hadjiiska, R. M.

Hassan, A.

Hauser, J.

Hoepfner, K.

Hohlmann, M.

Hoorani, H.

Iaydjiev, P.

Jeng, Y. G.

Kamon, T.

Karchin, P.

Kim, H.

Korytov, A.

Krutelyov, S.

Kumar, A.

Lee, J.

Lentdecker, G. De

Lenzi, T.

Litov, L.

Loddo, F

Madorsky, A.

Maerschalk, T.

Maggi, M.

Magnani, A.

Majumdar, N.

Mal, P. K.

Mandal, K.

Marchioro, A.

Marinov, A.

Masod, R.

Merlin, J. A.

Mitselmakher, G.

Mohamed, S.

Mohanty, A. K.

Mohapatra, A.

Molnar, J.

English

Muhammad, S.

Mukhopadhyay, S.

Naimuddin, M.

Nuzzo, S.

Oliveri, E.

Pant, L. M.

Paolucci, P.

Park, I.

Passeggio, G.

Pavlov, B.

Philipps, B.

Piccolo, D.

Postema, H.

Radi, A.

Radogna, R.

Raffone, G.

Ranieri, A.

Rashevski, G.

Riccardi, C.

Rodozov, M.

Rodrigues, A.

Ropelewski, L.

RoyChowdhury, S.

Ryu, G.

Ryu, M. S.

Safonov, A.

Salva, S.

Saviano, G.

Sharma, A.

Sharma, R.

Shah, A. H.

Shopova, M.

Sturdy, J.

Sultanov, G.

Swain, S. K.

Szillasi, Z.

Talvitie, J.

Tamma, C.

Tatarinov, A.

Tuuva, T.

Tytgat, M.

Vai, I.

Van Stenis, M.

Venditti, R.

Verhagen, E.

Verwilligen, P.

Vitulo, P.

Volkov, S.

Vorobyev, A.

Wang, D.

Wang, M.

Yang, U.

Yang, Y.

Yonamine, R.

Zaganidis, N.

Zenoni, F.

Zhang, A.

Publikationsserver der RWTH Aachen University

Design of a constant fraction discriminator for the VFAT3 front-end ASIC of the CMS GEM detector

In this work the design of a constant fraction discriminator (CFD) to be used in the VFAT3 chip for the read-out of the triple-GEM detectors of the CMS experiment, is described. A prototype chip containing 8 CFDs was implemented using 130 nm CMOS technology and test results are shown

Alfieri, P.

Cimmino, Anna

De Lentdecker, G.

De Oliveira, R.

de Robertis, G.

DiIdick, S.

Loddo, F.

Ghent University Academic Bibliography

This content has been downloaded from IOPscience. Please scroll down to see the full text.Download details:IP Address: 157.193.99.18This content was downloaded on 13/06/2017 at 08:53Please note that terms and conditions apply.Design of a constant fraction discriminator for the VFAT3 front-end ASIC of the CMS GEMdetectorView the table of contents for this issue, or go to the journal homepage for more2016 JINST 11 C01023(http://iopscience.iop.org/1748-0221/11/01/C01023)Home Search Collections Journals About Contact us My IOPscienceYou may also be interested in:Recent Standard Model results from CMSSimon de Visscher and CMS collaborationUpgrades for the CMS simulationD J Lange, M Hildreth, V N Ivantchenko et al.CMS High Level Trigger Timing MeasurementsClint RichardsonEvaluation of a front-end ASIC for the readout of PMTs over a large dynamic rangeWu Wei-Hao, Zhao Lei, Liang Yu et al.The CMS Condition Database SystemS. Di Guida, G. Govi, M. Ojeda et al.Using the CMS Threaded Framework In A Production EnvironmentC D Jones, L Contreras, P Gartung et al.A LOW-COST PULSE AMPLIFIER AND DISCRIMINATOR FOR PHOTON COUNTINGDonald J. TaylorA TOF-PET Detector based on Quadrant-Sharing PMTs and Optimized Leading-edge Timing MethodYingjie Wang, Junhui Liu, Daowu Li et al.Digital setup for Doppler broadening spectroscopyJ Cizek, M Vlcek and I Prochazka2016 JINST 11 C01023Published by IOP Publishing for Sissa MedialabReceived: November 4, 2015Accepted: December 1, 2015Published: January 14, 2016Topical Workshop on Electronics for Particle Physics 2015,September 28th – October 2nd, 2015Lisbon, PortugalDesign of a constant fraction discriminator for the VFAT3front-end ASIC of the CMS GEM detectorD. Abbaneo,r M. Abbas,r M. Abbrescia,b A.A. Abdelalim,i M. Abi Akl,n O. Aboamer,hD. Acosta,p A. Ahmad,t W. Ahmed,i W. Ahmed,t A. Aleksandrov,ad R. Aly,i P. Altieri,bC. Asawatangtrakuldee,c P. Aspell,r Y. Assran,h I. Awan,t S. Bally,r Y. Ban,c S. Banerjee,uV. Barashko,p P. Barria,e G. Bencze,g N. Beni,k L. Benussi,o V. Bhopatkar,w S. Bianco,oJ. Bos,r O. Bouhali,n A. Braghieri,ab S. Braibant,d S. Buontempo,aa C. Calabria,bM. Caponero,o C. Caputo,b F. Cassese,aa A. Castaneda,n S. Cauwenbergh,s F.R. Cavallo,dA. Celik,j M. Choi,ah S. Choi,af J. Christiansen,r A. Cimmino,s S. Colafranceschi,rA. Colaleo,b A. Conde Garcia,r S. Czellar,k M. M. Dabrowski,r G. De Lentdecker,eR. De Oliveira,r G. de Robertis,b S. Dildick,j,s B. Dorney,r W. Elmetenawee,i G. Endroczi,gF. Errico,b A. Fenyvesi,k S. Ferry,r I. Furic,p P. Giacomelli,d J. Gilmore,j V. Golovtsov,qL. Guiducci,d F. Guilloux,ac A. Gutierrez,m R.M. Hadjiiska,ad A. Hassan,i J. Hauser,yK. Hoepfner,a M. Hohlmann,w H. Hoorani,t P. Iaydjiev,ad Y. G. Jeng,ah T. Kamon,jP. Karchin,m A. Korytov,p S. Krutelyov,j A. Kumar,l H. Kim,ah J. Lee,ah T. Lenzi,e L. Litov,aeF. Loddo,b,1 A. Madorsky,p T. Maerschalk,e M. Maggi,b A. Magnani,ab P.K. Mal, f K. Mandal, fA. Marchioro,r A. Marinov,r R. Masod,h N. Majumdar,u J.A. Merlin,r,x G. Mitselmakher,pA.K. Mohanty,z S. Mohamed,h A. Mohapatra,w J. Molnar,k S. Muhammad,tS. Mukhopadhyay,u M. Naimuddin,l S. Nuzzo,b E. Oliveri,r L.M. Pant,z P. Paolucci,aaI. Park,ah G. Passeggio,aa B. Pavlov,ae B. Philipps,a D. Piccolo,o H. Postema,r A. PuigBaranac,r A. Radi,h R. Radogna,b G. Raffone,o A. Ranieri,b G. Rashevski,ad C. Riccardi,abM. Rodozov,ad A. Rodrigues,r L. Ropelewski,r S. RoyChowdhury,u G. Ryu,ah M.S. Ryu,ahA. Safonov,j S. Salva,s G. Saviano,o A. Sharma,b A. Sharma,r R. Sharma,l A.H. Shah,lM. Shopova,ad J. Sturdy,m G. Sultanov,ad S.K. Swain, f Z. Szillasi,k J. Talvitie,v C. Tamma,bA. Tatarinov,j T. Tuuva,v M. Tytgat,s I. Vai,ab M. Van Stenis,r R. Venditti,b E. Verhagen,eP. Verwilligen,b P. Vitulo,ab S. Volkov,q A. Vorobyev,q D. Wang,c M. Wang,c U. Yang,agY. Yang,e R. Yonamine,e N. Zaganidis,s F. Zenonie and A. ZhangwaRWTH Aachen University, III Physikalisches Institut A, Aachen, GermanybINFN Bari and University of Bari, Bari, Italy1Corresponding author.© CERN 2016, published under the terms of the Creative Commons Attribution 3.0License by IOP Publishing Ltd and Sissa Medialab srl. Any further distribution of thiswork must maintain attribution to the author(s) and the published article’s title, journal citation and DOI.doi:10.1088/1748-0221/11/01/C010232016 JINST 11 C01023cPeking University, Beijing, ChinadINFN Bologna and University of Bologna, Bologna, ItalyeUniversite Libre de Bruxelles, Brussels, BelgiumfNational Institute of Science Education and Research, BhubaneswargInstitute for Particle and Nuclear Physics, Wigner Research Centre for Physics, Hungarian Academy ofSciences, Budapest, HungaryhAcademy of Scientific Research and Technology - Egyptian Network of High Energy Physics, ASRT-ENHEP,Cairo, EgyptiHelwan University & CTP, Cairo, EgyptjTexas A&M University, College Station, U.S.A.kInstitute for Nuclear Research of the Hungarian Academy of Sciences (ATOMKI), Debrecen, HungarylUniversity of Delhi, Delhi, IndiamWayne State University, Detroit, U.S.AnTexas A&M University at Qatar, Doha, QataroLaboratori Nazionali di Frascati - INFN, Frascati, ItalypUniversity of Florida, Gainesville, U.S.A.qPetersburg Nuclear Physics Institute, Gatchina, RussiarCERN, Geneva, SwitzerlandsGhent University, Dept. of Physics and Astronomy, Ghent, BelgiumtNational Center for Physics, Quaid-i-Azam University Campus, Islamabad, PakistanuSaha Institute of Nuclear Physics, Kolkata, IndiavLappeenranta University of Technology, Lappeenranta, FinlandwFlorida Institute of Technology, Melbourne, U.S.A.xInstitut Pluridisciplinaire - Hubert Curien (IPHC), Strasbourg, FranceyUniversity of California, Los Angeles, U.S.A.zBhabha Atomic Research Centre, Mumbai, IndiaaaINFN Napoli, Napoli, ItalyabINFN Pavia and University of Pavia, Pavia, ItalyacIRFU CEA-Saclay, Saclay, FranceadInstitute for Nuclear Research and Nuclear Energy, Sofia, BulgariaaeSofia University, Sofia, BulgariaafKorea University, Seoul, KoreaagSeoul National University, Seoul, KoreaahUniversity of Seoul, Seoul, KoreaE-mail: flavio.loddo@ba.infn.itAbstract: In this work the design of a constant fraction discriminator (CFD) to be used in theVFAT3 chip for the read-out of the triple-GEM detectors of the CMS experiment, is described.A prototype chip containing 8 CFDs was implemented using 130 nm CMOS technology and testresults are shown.Keywords: VLSI circuits; Analogue electronic circuits; Front-end electronics for detector readout2016 JINST 11 C01023Contents1 Introduction 12 Simulation 23 CFD implementation 33.1 Principle of operation 33.2 Architecture 34 Prototypes 55 Test results 56 Conclusions 61 IntroductionThe triple-GEM detector is a Micro Pattern Gas Detector (MPGD) that will be installed in the firststation of the forward region (1.5 < |η | < 2.2) of the CMSmuon spectrometer as part of its upgradefor the high luminosity phases of the CERN LHC [1]. One of the objectives of this upgrade is theimprovement of the muon trigger efficiency, thus the time resolution is an important parameter tobe considered for the correct assignment of the event to the LHC bunch crossing. The triple-GEMis made of four gas gaps separated by three GEM foils and the typical signal is shown in figure 1.In CMS, the triple-GEM detector will be read-out by the VFAT3 front-end chip, currentlyunder design, whose block diagram is shown in figure 2. The VFAT3 architecture is made of128 channels, each one composed of a charge sensitive preamplifier, shaper and comparator. Thecomparator output is then synchronized with the LHC clock and sent both to a fixed latency pathFigure 1. Typical triple-GEM signal.– 1 –2016 JINST 11 C01023Figure 2. VFAT3 block diagram.for trigger signal generation and to a bunch of memories for storage and readout. The front-endamplifier is programmable in terms of gain and pulse shaping time, in order to adapt it to a widerange of gaseous and silicon detectors [1].2 SimulationThe time resolution, which is an important parameter for the use of the GEM detectors at the firstCMS trigger level, has been studied with Monte Carlo simulations. The simulations are basedon the GARFIELD [2] software to compute the CMS triple-GEM signals, taking into accountthe ionization statistics, the charge drift and amplification processes inside the gas volume of thedetector [3]. The detector signal is then convolved with the expected transfer function of thefront-end amplifier of VFAT3 chip and the time resolution (figure 3) and latency (figure 4) forvarious VFAT3 peaking times are computed using the constant fraction discriminator (CFD) andthe time-over-threshold (TOT) techniques.The simulation study showed that it was possible to extend the VFAT3 front-end shaping timein order to fully integrate the GEM detector signal charge and avoid ballistic deficit and that the mostefficient method, in terms of combined time resolution and latency, is the CFD method. Using thisFigure 3. Time resolution vs peaking time.– 2 –2016 JINST 11 C01023Peaking time (ns)20 40 60 80 100 120 140 160 180 200Latency (ns)210310CFDTOTFigure 4. Latency vs peaking time.technique, for a peaking time of 50 ns and a gas mixture of Ar/CO2/CF4 of 45:15:40, the simulatedtime resolution is 4.98 ± 0.16 ns with a total latency of 100 ± 5 ns.3 CFD implementation3.1 Principle of operationConstant fraction discrimination is a technique to provide amplitude-independent information aboutarrival time of an event. The principle operation is based on detecting the zero-crossing of thebipolar pulse obtained by subtracting a fraction of the input unipolar signal to its delayed copy(figure 5). It can be demonstrated that the bipolar pulse crosses the baseline at a fixed time withrespect to the start of the pulse [4].3.2 ArchitectureSeveral practical implementations of integrated CFD have been proposed in literature [5]. Inthis project, the solution proposed by S. Garbolino et al. [6] has been adopted. It is based on afully differential architecture for better noise rejection and the delay and fraction implementationis realized using a shaping network with the cross-coupling topology shown in figure 6. Sincethe VFAT3 analog front-end will have a programmable shaping time ranging between 25 ns and100 ns, the same programmability has been introduced in the time constants of the CFD shapingnetwork, in order to fully exploit the CFD technique for each VFAT3 shaping time. The resultingFigure 5. Scheme of CFD principle of operation.– 3 –2016 JINST 11 C01023Figure 6. Shaping network with cross-coupling topology.Table 1. Shaping network parameters.Tpeak[ns] Delay time Td[ns] f(fraction factor)25 15 0.3950 29 0.4275 43.4 0.42100 57.8 0.42shaping network parameters are listed in table 1. The CFD block diagram is shown in figure 7.The differential input signals are sent to the shaping network and the resulting bipolar pulses areamplified by the post-amplifier that recovers the signal attenuation introduced by the passive shapingnetwork and also applies a dynamic offset compensation. Finally, the differential bipolar pulsesare sent to the zero-crossing (ZC) comparator that produces a digital pulse whenever its differentialinput crosses the baseline. The input signals are sent in parallel to an arming circuitry, in order toenable the CFD output only when the input signal is larger than the programmed threshold providedby a global 8-bit digital-to-analog-converter (DAC). Moreover, both arming and ZC comparators ofeach channel have their own 6-bit DAC to compensate mismatches among channels.Figure 7. CFD block diagram.– 4 –2016 JINST 11 C01023Figure 8. Test setup.4 PrototypesA prototype chip containing 8 CFDs has been produced using 130 nm CMOS technology to provethe effectiveness of the proposed technique before its integration in the VFAT3 chip. The biases andthresholds are provided by internal DACs remotely controlled by an SPI interface. The test setup,shown in figure 8, consists of an arbitrary waveform generator (Lecroy Arbstudio 1102) capableof injecting into the chip inputs two semi-gaussian differential signals with tunable amplitude,peaking time (25 ns to 100 ns) and offset, and a 10GS/s oscilloscope to perform the measurementon the outputs. Finally, a custom SPI controller allows to write/read the internal DACs, while amultimeter can be used to monitor internal voltages/currents. First of all, the local DACs havebeen set to equalize the channel thresholds. Then, using a global threshold of 10mV, a set of timemeasurements have been performed injecting differential pulses with amplitude ranging between10mV and 1V for different peaking time.5 Test resultsIn figure 9 a comparison between the timing response of the arming comparator (on the left) and theCFD (on the right) for Tpeak = 100 ns are shown: it can be noticed that, skipping the point at thethreshold of 10mV, the arming comparator exhibits an amplitude time walk in the order of sometens of ns, while the CFD time response is almost independent of the input amplitude, showing aresidual time walk < 1 ns for the individual channel and < 2 ns considering the 8 channels of thechip. Similar results are obtained also for the other peaking times. The rate capability dependson the peaking time and ranges between 400 kHz for Tpeak = 100 ns and 1 MHz for Tpeak =25 ns. Another set of measurements was performed to evaluate the double pulse resolution. Twoconsecutive pulses with different amplitude and different time spacing ∆T (figure 10) were sentto the CFD: using signals with Tpeak = 75 ns, a large pulse (1V) can be followed by small pulse(20mV) after t > 1.5 µs with no timing degradation, while if Tpeak = 25 ns, a large pulse (1V) canbe followed by small pulse after t > 800 ns with no timing degradation.– 5 –2016 JINST 11 C01023Figure 9. Arming comparator and CFD time response for Tpeak = 100 ns.Figure 10. Input signals for double pulse test.6 ConclusionsThemeasurements on the CFD prototypes confirm the effectiveness of the proposed implementationand encourage us to use it in the VFAT3 chip for time walk correction when using peaking timelonger than 25 ns.AcknowledgmentsWe gratefully acknowledge support from FRS-FNRS (Belgium), FWO-Flanders (Belgium), BSF-MES (Bulgaria), BMBF (Germany), DAE (India), DST (India), INFN (Italy), NRF (Korea), QNRF(Qatar), and DOE (USA).– 6 –2016 JINST 11 C01023References[1] CMS GEM collaboration, CMS technical design report for the muon endcap GEM upgradeCMS-TDR-013, CERN-LHCC-2015-012 (2015).[2] R. Veenhof, garfield.web.cern.ch/garfield.[3] T. Maerschalk et al., Study of the time resolution of the Triple-GEM detectors for the CMS experiment,CMS Detector Note CMS DN-2014/035 (2014).[4] D.A. Gedke and W.J. McDonald, A constant fraction of pulse height trigger for optimum timeresolution, Nucl. Instrum. Meth. 55 (1967) 377.[5] D.M. Binkley et al., A 10-Mcps, 0.5-um CMOS Constant-Fraction-Discriminator Having Bilt-In PulseTail Cancellation, IEEE Nucl. Sci. Symp. Conf. Rec. 1 (2001) 151.[6] S. Garbolino et al., Implementation of Constant-Fraction-Discriminators (CFD) in Sub-micron CMOSTechnologies, IEEE Nucl. Sci. Symp. Conf. Rec. 2011 (2011) 1530.– 7 –

RWTH Publications

Oliveira, R. De

Archivio della ricerca- Università di Roma La Sapienza

This content has been downloaded from IOPscience. Please scroll down to see the full text.Download details:IP Address: 128.141.252.188This content was downloaded on 20/06/2016 at 11:50Please note that terms and conditions apply. Design of a constant fraction discriminator for the VFAT3 front-end ASIC of the CMS GEMdetectorView the table of contents for this issue, or go to the journal homepage for more2016 JINST 11 C01023(http://iopscience.iop.org/1748-0221/11/01/C01023)Home Search Collections Journals About Contact us My IOPscience2016 JINST 11 C01023Published by IOP Publishing for Sissa MedialabReceived: November 4, 2015Accepted: December 1, 2015Published: January 14, 2016Topical Workshop on Electronics for Particle Physics 2015,September 28th – October 2nd, 2015Lisbon, PortugalDesign of a constant fraction discriminator for the VFAT3front-end ASIC of the CMS GEM detectorD. Abbaneo,r M. Abbas,r M. Abbrescia,b A.A. Abdelalim,i M. Abi Akl,n O. Aboamer,hD. Acosta,p A. Ahmad,t W. Ahmed,i W. Ahmed,t A. Aleksandrov,ad R. Aly,i P. Altieri,bC. Asawatangtrakuldee,c P. Aspell,r Y. Assran,h I. Awan,t S. Bally,r Y. Ban,c S. Banerjee,uV. Barashko,p P. Barria,e G. Bencze,g N. Beni,k L. Benussi,o V. Bhopatkar,w S. Bianco,oJ. Bos,r O. Bouhali,n A. Braghieri,ab S. Braibant,d S. Buontempo,aa C. Calabria,bM. Caponero,o C. Caputo,b F. Cassese,aa A. Castaneda,n S. Cauwenbergh,s F.R. Cavallo,dA. Celik,j M. Choi,ah S. Choi,af J. Christiansen,r A. Cimmino,s S. Colafranceschi,rA. Colaleo,b A. Conde Garcia,r S. Czellar,k M. M. Dabrowski,r G. De Lentdecker,eR. De Oliveira,r G. de Robertis,b S. Dildick,j,s B. Dorney,r W. Elmetenawee,i G. Endroczi,gF. Errico,b A. Fenyvesi,k S. Ferry,r I. Furic,p P. Giacomelli,d J. Gilmore,j V. Golovtsov,qL. Guiducci,d F. Guilloux,ac A. Gutierrez,m R.M. Hadjiiska,ad A. Hassan,i J. Hauser,yK. Hoepfner,a M. Hohlmann,w H. Hoorani,t P. Iaydjiev,ad Y. G. Jeng,ah T. Kamon,jP. Karchin,m A. Korytov,p S. Krutelyov,j A. Kumar,l H. Kim,ah J. Lee,ah T. Lenzi,e L. Litov,aeF. Loddo,b,1 A. Madorsky,p T. Maerschalk,e M. Maggi,b A. Magnani,ab P.K. Mal, f K. Mandal, fA. Marchioro,r A. Marinov,r R. Masod,h N. Majumdar,u J.A. Merlin,r,x G. Mitselmakher,pA.K. Mohanty,z S. Mohamed,h A. Mohapatra,w J. Molnar,k S. Muhammad,tS. Mukhopadhyay,u M. Naimuddin,l S. Nuzzo,b E. Oliveri,r L.M. Pant,z P. Paolucci,aaI. Park,ah G. Passeggio,aa B. Pavlov,ae B. Philipps,a D. Piccolo,o H. Postema,r A. PuigBaranac,r A. Radi,h R. Radogna,b G. Raffone,o A. Ranieri,b G. Rashevski,ad C. Riccardi,abM. Rodozov,ad A. Rodrigues,r L. Ropelewski,r S. RoyChowdhury,u G. Ryu,ah M.S. Ryu,ahA. Safonov,j S. Salva,s G. Saviano,o A. Sharma,b A. Sharma,r R. Sharma,l A.H. Shah,lM. Shopova,ad J. Sturdy,m G. Sultanov,ad S.K. Swain, f Z. Szillasi,k J. Talvitie,v C. Tamma,bA. Tatarinov,j T. Tuuva,v M. Tytgat,s I. Vai,ab M. Van Stenis,r R. Venditti,b E. Verhagen,eP. Verwilligen,b P. Vitulo,ab S. Volkov,q A. Vorobyev,q D. Wang,c M. Wang,c U. Yang,agY. Yang,e R. Yonamine,e N. Zaganidis,s F. Zenonie and A. ZhangwaRWTH Aachen University, III Physikalisches Institut A, Aachen, GermanybINFN Bari and University of Bari, Bari, Italy1Corresponding author.© CERN 2016, published under the terms of the Creative Commons Attribution 3.0License by IOP Publishing Ltd and Sissa Medialab srl. Any further distribution of thiswork must maintain attribution to the author(s) and the published article’s title, journal citation and DOI.doi:10.1088/1748-0221/11/01/C010232016 JINST 11 C01023cPeking University, Beijing, ChinadINFN Bologna and University of Bologna, Bologna, ItalyeUniversite Libre de Bruxelles, Brussels, BelgiumfNational Institute of Science Education and Research, BhubaneswargInstitute for Particle and Nuclear Physics, Wigner Research Centre for Physics, Hungarian Academy ofSciences, Budapest, HungaryhAcademy of Scientific Research and Technology - Egyptian Network of High Energy Physics, ASRT-ENHEP,Cairo, EgyptiHelwan University & CTP, Cairo, EgyptjTexas A&M University, College Station, U.S.A.kInstitute for Nuclear Research of the Hungarian Academy of Sciences (ATOMKI), Debrecen, HungarylUniversity of Delhi, Delhi, IndiamWayne State University, Detroit, U.S.AnTexas A&M University at Qatar, Doha, QataroLaboratori Nazionali di Frascati - INFN, Frascati, ItalypUniversity of Florida, Gainesville, U.S.A.qPetersburg Nuclear Physics Institute, Gatchina, RussiarCERN, Geneva, SwitzerlandsGhent University, Dept. of Physics and Astronomy, Ghent, BelgiumtNational Center for Physics, Quaid-i-Azam University Campus, Islamabad, PakistanuSaha Institute of Nuclear Physics, Kolkata, IndiavLappeenranta University of Technology, Lappeenranta, FinlandwFlorida Institute of Technology, Melbourne, U.S.A.xInstitut Pluridisciplinaire - Hubert Curien (IPHC), Strasbourg, FranceyUniversity of California, Los Angeles, U.S.A.zBhabha Atomic Research Centre, Mumbai, IndiaaaINFN Napoli, Napoli, ItalyabINFN Pavia and University of Pavia, Pavia, ItalyacIRFU CEA-Saclay, Saclay, FranceadInstitute for Nuclear Research and Nuclear Energy, Sofia, BulgariaaeSofia University, Sofia, BulgariaafKorea University, Seoul, KoreaagSeoul National University, Seoul, KoreaahUniversity of Seoul, Seoul, KoreaE-mail: flavio.loddo@ba.infn.itAbstract: In this work the design of a constant fraction discriminator (CFD) to be used in theVFAT3 chip for the read-out of the triple-GEM detectors of the CMS experiment, is described.A prototype chip containing 8 CFDs was implemented using 130 nm CMOS technology and testresults are shown.Keywords: VLSI circuits; Analogue electronic circuits; Front-end electronics for detector readout2016 JINST 11 C01023Contents1 Introduction 12 Simulation 23 CFD implementation 33.1 Principle of operation 33.2 Architecture 34 Prototypes 55 Test results 56 Conclusions 61 IntroductionThe triple-GEM detector is a Micro Pattern Gas Detector (MPGD) that will be installed in the firststation of the forward region (1.5 < |η | < 2.2) of the CMSmuon spectrometer as part of its upgradefor the high luminosity phases of the CERN LHC [1]. One of the objectives of this upgrade is theimprovement of the muon trigger efficiency, thus the time resolution is an important parameter tobe considered for the correct assignment of the event to the LHC bunch crossing. The triple-GEMis made of four gas gaps separated by three GEM foils and the typical signal is shown in figure 1.In CMS, the triple-GEM detector will be read-out by the VFAT3 front-end chip, currentlyunder design, whose block diagram is shown in figure 2. The VFAT3 architecture is made of128 channels, each one composed of a charge sensitive preamplifier, shaper and comparator. Thecomparator output is then synchronized with the LHC clock and sent both to a fixed latency pathFigure 1. Typical triple-GEM signal.– 1 –2016 JINST 11 C01023Figure 2. VFAT3 block diagram.for trigger signal generation and to a bunch of memories for storage and readout. The front-endamplifier is programmable in terms of gain and pulse shaping time, in order to adapt it to a widerange of gaseous and silicon detectors [1].2 SimulationThe time resolution, which is an important parameter for the use of the GEM detectors at the firstCMS trigger level, has been studied with Monte Carlo simulations. The simulations are basedon the GARFIELD [2] software to compute the CMS triple-GEM signals, taking into accountthe ionization statistics, the charge drift and amplification processes inside the gas volume of thedetector [3]. The detector signal is then convolved with the expected transfer function of thefront-end amplifier of VFAT3 chip and the time resolution (figure 3) and latency (figure 4) forvarious VFAT3 peaking times are computed using the constant fraction discriminator (CFD) andthe time-over-threshold (TOT) techniques.The simulation study showed that it was possible to extend the VFAT3 front-end shaping timein order to fully integrate the GEM detector signal charge and avoid ballistic deficit and that the mostefficient method, in terms of combined time resolution and latency, is the CFD method. Using thisFigure 3. Time resolution vs peaking time.– 2 –2016 JINST 11 C01023Peaking time (ns)20 40 60 80 100 120 140 160 180 200Latency (ns)210310CFDTOTFigure 4. Latency vs peaking time.technique, for a peaking time of 50 ns and a gas mixture of Ar/CO2/CF4 of 45:15:40, the simulatedtime resolution is 4.98 ± 0.16 ns with a total latency of 100 ± 5 ns.3 CFD implementation3.1 Principle of operationConstant fraction discrimination is a technique to provide amplitude-independent information aboutarrival time of an event. The principle operation is based on detecting the zero-crossing of thebipolar pulse obtained by subtracting a fraction of the input unipolar signal to its delayed copy(figure 5). It can be demonstrated that the bipolar pulse crosses the baseline at a fixed time withrespect to the start of the pulse [4].3.2 ArchitectureSeveral practical implementations of integrated CFD have been proposed in literature [5]. Inthis project, the solution proposed by S. Garbolino et al. [6] has been adopted. It is based on afully differential architecture for better noise rejection and the delay and fraction implementationis realized using a shaping network with the cross-coupling topology shown in figure 6. Sincethe VFAT3 analog front-end will have a programmable shaping time ranging between 25 ns and100 ns, the same programmability has been introduced in the time constants of the CFD shapingnetwork, in order to fully exploit the CFD technique for each VFAT3 shaping time. The resultingFigure 5. Scheme of CFD principle of operation.– 3 –2016 JINST 11 C01023Figure 6. Shaping network with cross-coupling topology.Table 1. Shaping network parameters.Tpeak[ns] Delay time Td[ns] f(fraction factor)25 15 0.3950 29 0.4275 43.4 0.42100 57.8 0.42shaping network parameters are listed in table 1. The CFD block diagram is shown in figure 7.The differential input signals are sent to the shaping network and the resulting bipolar pulses areamplified by the post-amplifier that recovers the signal attenuation introduced by the passive shapingnetwork and also applies a dynamic offset compensation. Finally, the differential bipolar pulsesare sent to the zero-crossing (ZC) comparator that produces a digital pulse whenever its differentialinput crosses the baseline. The input signals are sent in parallel to an arming circuitry, in order toenable the CFD output only when the input signal is larger than the programmed threshold providedby a global 8-bit digital-to-analog-converter (DAC). Moreover, both arming and ZC comparators ofeach channel have their own 6-bit DAC to compensate mismatches among channels.Figure 7. CFD block diagram.– 4 –2016 JINST 11 C01023Figure 8. Test setup.4 PrototypesA prototype chip containing 8 CFDs has been produced using 130 nm CMOS technology to provethe effectiveness of the proposed technique before its integration in the VFAT3 chip. The biases andthresholds are provided by internal DACs remotely controlled by an SPI interface. The test setup,shown in figure 8, consists of an arbitrary waveform generator (Lecroy Arbstudio 1102) capableof injecting into the chip inputs two semi-gaussian differential signals with tunable amplitude,peaking time (25 ns to 100 ns) and offset, and a 10GS/s oscilloscope to perform the measurementon the outputs. Finally, a custom SPI controller allows to write/read the internal DACs, while amultimeter can be used to monitor internal voltages/currents. First of all, the local DACs havebeen set to equalize the channel thresholds. Then, using a global threshold of 10mV, a set of timemeasurements have been performed injecting differential pulses with amplitude ranging between10mV and 1V for different peaking time.5 Test resultsIn figure 9 a comparison between the timing response of the arming comparator (on the left) and theCFD (on the right) for Tpeak = 100 ns are shown: it can be noticed that, skipping the point at thethreshold of 10mV, the arming comparator exhibits an amplitude time walk in the order of sometens of ns, while the CFD time response is almost independent of the input amplitude, showing aresidual time walk < 1 ns for the individual channel and < 2 ns considering the 8 channels of thechip. Similar results are obtained also for the other peaking times. The rate capability dependson the peaking time and ranges between 400 kHz for Tpeak = 100 ns and 1 MHz for Tpeak =25 ns. Another set of measurements was performed to evaluate the double pulse resolution. Twoconsecutive pulses with different amplitude and different time spacing ∆T (figure 10) were sentto the CFD: using signals with Tpeak = 75 ns, a large pulse (1V) can be followed by small pulse(20mV) after t > 1.5 µs with no timing degradation, while if Tpeak = 25 ns, a large pulse (1V) canbe followed by small pulse after t > 800 ns with no timing degradation.– 5 –2016 JINST 11 C01023Figure 9. Arming comparator and CFD time response for Tpeak = 100 ns.Figure 10. Input signals for double pulse test.6 ConclusionsThemeasurements on the CFD prototypes confirm the effectiveness of the proposed implementationand encourage us to use it in the VFAT3 chip for time walk correction when using peaking timelonger than 25 ns.AcknowledgmentsWe gratefully acknowledge support from FRS-FNRS (Belgium), FWO-Flanders (Belgium), BSF-MES (Bulgaria), BMBF (Germany), DAE (India), DST (India), INFN (Italy), NRF (Korea), QNRF(Qatar), and DOE (USA).– 6 –2016 JINST 11 C01023References[1] CMS GEM collaboration, CMS technical design report for the muon endcap GEM upgradeCMS-TDR-013, CERN-LHCC-2015-012 (2015).[2] R. Veenhof, garfield.web.cern.ch/garfield.[3] T. Maerschalk et al., Study of the time resolution of the Triple-GEM detectors for the CMS experiment,CMS Detector Note CMS DN-2014/035 (2014).[4] D.A. Gedke and W.J. McDonald, A constant fraction of pulse height trigger for optimum timeresolution, Nucl. Instrum. Meth. 55 (1967) 377.[5] D.M. Binkley et al., A 10-Mcps, 0.5-um CMOS Constant-Fraction-Discriminator Having Bilt-In PulseTail Cancellation, IEEE Nucl. Sci. Symp. Conf. Rec. 1 (2001) 151.[6] S. Garbolino et al., Implementation of Constant-Fraction-Discriminators (CFD) in Sub-micron CMOSTechnologies, IEEE Nucl. Sci. Symp. Conf. Rec. 2011 (2011) 1530.– 7 –

https://iris.uniroma1.it/bitstream/11573/875874/1/Abbaneo_Design-constant-fraction_2016.pdf

Design of a constant fraction discriminator for the VFAT3 front-end ASIC of the CMS GEM detector

Abstract

Similar works

Full text

Available Versions

Publikationsserver der RWTH Aachen University

Ghent University Academic Bibliography

RWTH Publications

Archivio della ricerca- Università di Roma La Sapienza