The paper describes a fibrous mineral detection methodology, which is based on the use of alternating rotary motion sieving equipment. The equipment was redesigned to meet additional requirements with respect to initial ones. Under this methodology, the fine fraction passing through the sieves was recovered and analysed to determine the sedimentology, mineralogy and morphology of the potentially particulating fraction. Reliance was made on the following analytical techniques: laser granulometry, scanning electron microscopy/energy dispersive spectrometry (SEM/EDS) and polarised and phase contrast light microscopy (PLM, PCLM) for fibrous mineral identification and Walton-Beckett / whole field fibre counting. The samples for the analyses came from known areas with fibrous minerals, e.g. Lauria (Basilicata), and less known areas, e.g. the Natural Reserve of Mt. Rufeno (Latium) and Biancavilla (Sicily). With this methodology, fibres may be directly detected in both farmed and unfarmed soil with fibrous minerals and the process may be repeated in the various stages of farming or during works for creation of fire barriers or lanes, hydrogeological restoration etc. The goal is to identify risks arising from the natural occurrence of asbestos upon atypical activities, such as farming and forestry. With regard to exposure, consideration was given to fibrous minerals not currently classified in the relevant legislation, thus going beyond the search for asbestiform minerals in quarry sites located in ophiolite outcrop areas
