Academic Press Incorporated:6277 Sea Harbor Drive:Orlando, FL 32887:(800)543-9534, (407)345-4100, EMAIL: [email protected], INTERNET: http://www.idealibrary.com, Fax: (407)352-3445 ACADEMIC PRESS INC ELSEVIER SCIENCE, 525 B ST, STE 1900, SAN DIEGO, USA, CA, 92101-4495
Abstract
Sol-gel routes were used to prepare Ta 10 at% and Nb 5 at% and 10 at% doped titania nanosized powders. When fired between 410degreesC and 850degreesC the doped titania powders are in the anatase phase; further heating up to 1050degreesC is required to obtain the rutile phase. The presence of dopant atoms delays the rate of transformation as compared with pure titania powders. Doping also affects the rate of grain growth and increases the conductance response to gas. To better understand the role played by dopant atoms in inhibiting both phase transformation to rutile and grain growth, X-ray Absorption Spectroscopy measurements were performed at the LIIIF-L-I absorption edges of Ta and Nb K absorption edge. Analysis was restricted to the anatase phase because the transformation to rutile phase, obtained by firing at 1050degreesC, is accompanied by the formation of undesired Ta and Nb oxides (Ta2O5 and Nb2TiO7, respectively). Extended X-ray Absorption Fine Structure and X-ray Absorption Near-Edge Spectroscopy analysis results indicate that in nanostructured anatase both tantalum and niobium atoms substitute Ti cations with + 5 valence state