Nanostructured materials are attracting growing interest for improving performance of devices and systems of large technological interest. In this work, the principal results about the use of nanostructured materials in the field of electrochemical energy storage, electrochemical water splitting, and electrochemical sensing are presented. Nanostructures were fabricated with two different techniques. One of these was the electrodeposition of the desired material inside the channels of a porous support acting as template. The other one was based on displacement reaction induced by galvanic contact between metals with different electrochemical nobility. In the present work, a commercial polycarbonate membrane was used as template. In the field of the electrochemical energy storage, the attention was focused on lead-acid battery, and it has been found that nanostructured morphology enhances the active mass utilization up to about 80%, with consequent increase of specific energy and cycling rates to unattainable values for the commercial battery. Nanostructured Ni-IrO2 composite electrodes showed valuable catalytic activity for water oxidation. By comparison with other Ni-based electrocatalyst, this electrode appears as the most promising anode for electrochemical water splitting in alkaline cells. Also in the field of sensing, the nanostructured materials fabricated by displacement reaction showed performance of high interest. Some new results about the use of copper nanowires for H2O22 sensing will be showed, evidencing better performance in comparison with copper thin film. In this work, we will show that nanostructured electrodes are very promising candidate to form different electrochemical setups that operate more efficiently comparing to device with flat electrode materials
