Best paper 2006 award in the Extrusion divisionInternational audienceThe degree of filler dispersion has a major influence on the physical properties of rubber compounds. Typical fillers, e.g. carbon black and silica, are difficult to disperse, particularly if they are fine and low structured. As a result, the quantity of undispersed fillers generally amounts for 1% to 10% of the compound. The elimination, or at least the reduction, of agglomerates will result in rubber parts (e.g. tires, seals, belts) with improved properties and higher reliability. Clearly, a better understanding of the physics of batch mixers would help improve their mixing performance. Due to the complexity of the real process, experiments on a representative device were held from which a model has been deduced. It appears to be a generalization of the law of Kao and Mason, but for high viscous matrices. The next step was to get a model available for statistically large number of pellets as can be found in any sample taken out of the mixer. A statistical approach is used where we define a model describing the evolution of mass density function of agglomerate sizes. Eventually, we implement this model within available numerical simulation tools to estimate dispersion in real mixers
