If the temperature values of geothermal reservoirs given by classical
chemical geothermometers applied on thermal waters are relatively divergent, it
is often difficult to estimate the temperatures of these reservoirs with
sufficient accuracy for geothermal exploration, before drilling operations. In
this case, some auxiliary chemical geothermometers such as Na-Li, Mg-Li, Na-Rb,
Na-Cs, K-Sr, K-F, K-Mn, K-Fe, K-W, etc., existing in the literature can be
useful tools to help estimating these temperatures. However, previous studies
have shown these geothermometers are not only dependent on temperature, but
also on other parameters such as the nature of the reservoir rocks and
minerals, the fluid salinity, etc. Consequently, they must be used with
caution. Another problem for the use of these geothermometers is that Li, Sr,
Cs, Rb, Mn, Fe and W are under the form of trace elements in numerous
geothermal waters and that it is often difficult to find analyses of these
elements in the literature. In this study, we test some of these auxiliary
geothermometers on several waters selected from literature data relative to
East African Rift (EAR) geothermal areas, in Republic of Djibouti, Ethiopia and
Kenya, where temperature values of deep geothermal reservoirs have been
measured into wells or estimated with certainty using chemical classical
geothermometers applied on thermal waters. The comparative results are
discussed and allow bringing conclusions and recommendations. Among the tested
auxiliary geothermometers, this work shows that the Na-Li thermometric
relationship defined for the dilute waters from hightemperature volcanic
geothermal areas of Iceland is one of the most relevant to estimate the
temperatures of deep reservoirs for waters from several geothermal areas from
the Republic of Djibouti, Ethiopia and Kenya. In previous studies, this Na-Li
thermometric relationship had also given good estimations of reservoir
temperatures for high-temperature (T ≥ 300{\textdegree}C) borehole dilute
waters from the Los Humeros geothermal area, in Mexico, in volcanic
environment. The use of other auxiliary geothermometers such as K-F, K-Sr,
Na-Rb and Na-Cs (when F, Sr, Rb and Cs have been analysed) can be also relevant
in some cases