Purpose and method of the study: The production of activated carbon from
barley husks (BH) by chemical activation with zinc chloride was optimized by using a 23
factorial design with replicates at the central point, followed by a central composite
design with two responses (the yield and iodine number) and three factors (the
activation temperature, activation time, and impregnation ratio). Both responses were
simultaneously optimized by using the desirability functions approach to determine the
optimal conditions of this process. The experimental data from the batch phenol
adsorption onto barley husks activated carbon (BHAC) was represented by adsorption
isotherms (Langmuir and Freundlich) and kinetic models (pseudo-first and pseudosecond
order, and intraparticle diffusion models), besides the regeneration of phenolloaded
BHAC with different solvents was evaluated. Experimental data confirmed that
the breakthrough curves were dependent on BHAC dosage, phenol initial
concentration, air flow rate, and influent flow rate. Adaline and feed-forward backpropagation
Artificial Neural Networks (ANNs) were developed to predict the
breakthrough curves for the adsorption of phenol onto barley husks activated carbon
(BHAC) in an airlift reactor. Feed-forward back-propagation networks were tested with
different quantity of neurons at the hidden layer to determine the optimal number of
neurons in the ANN architecture to represent the breakthrough curves performed at
different operational conditions for the airlift reactor.
Contributions and conclusions: After the simultaneous dual optimization of
BHAC production, the maximal response values were obtained at an activation
temperature of 436 °C, an activation time of 20 min, and an impregnation ratio of 1.1 g
ZnCl2 g BH-1
, although the results after the single optimization of each response were
quite different. At these conditions, the predicted values for the iodine number and yield
were 829.58 ± 78.30 mg g-1 and 46.82 ± 2.64%, respectively, whereas experimental
tests produced values of 901.86 mg g-1 and 48.48%, respectively. Moreover, activated
carbons from BH obtained at the optimal conditions mainly developed a porous
vstructure (mesopores > 71% and micropores > 28%), achieving a high surface area
(811.44 m2 g-1
) that is similar to commercial activated carbons and lignocellulosic-based
activated carbons. These results imply that the pore width and surface area are large
enough to allow the diffusion and adsorption of pollutants inside the adsorbent particles.
Freundlich isotherm model satisfactorily predicted the equilibrium data at 25 and
35 °C, whereas the Langmuir isotherm model well represented the equilibrium data at
45 °C. The maximum phenol adsorption capacity onto BHAC was 98.83 mg g-1 at 25 °C
and pH 7, similar to phenol adsorption onto commercial activated carbons. The kinetic
data were adequately predicted by both the pseudo-first order and intraparticle diffusion
models. The external mass transfer was minimized at stirring speeds greater than 400
min-1
, and the adsorption kinetics are affected by both initial phenol concentration and
temperature. Adsorption equilibrium was reached within 40 and 200 min at initial phenol
concentration of 1000 mg L-1 at 35 °C and 30 °C, respectively. Ethanol/water solutions
at 10% V/V were the most effective regenerating agent, with desorption capacity of
47.79 mg g-1 after five adsorption-desorption cycles.
The breakthrough curves of phenol adsorption onto BHAC in an airlift reactor in
continuous operation were adequately predicted with feed-forward back-propagation
ANN architecture with 2 neurons in the hidden layer for the single-input single-output
problem. Correlation coefficients higher than 0.95 were observed between the
breakthrough curves predicted by the developed Adaline network and those obtained
experimentally for the multiple-input single-output problem. Further improvements and
generalization of the developed predictive Adaline network are discussed