Jacobsen, Peter

Larsen, Samuel

While traditional forward supply chains end with customer markets, the reverse supply chain (RSC) both begins and ends with the firm’s markets. The study applies the prevalent conceptual RSC‐description in the theoretical field by Guide and Van Wassenhove (2009). In the description, the RSC begins with take back of used products and physical reverse distribution. Then, the RSC inspects and sorts products to determine the right disposition strategy. Finally, the RSC ends with product recovery and resale. Even though resale of unrecovered products, internal reuse, and disposal through waste streams is not explicitly part of the description, this study does include them as disposition strategies. Although some RSC topics have been fairly well‐addressed in extant literature (e.g. product acquisition, inventory models and product disassembly), the RSC‐topic remains under‐explored (Pohkarel and Mutha, 2009; Kocabasoglu et al., 2007; Huscroft et al., 2013). In supply chain and operations management (OM) literature a RSC is usually seen as a straightforward one‐dimensional process, e.g. as the process described in the previous paragraph. However, a RSC can perform a variety of different functions for the firm. Among the many RSC‐functions are remanufacturing complete end‐products for resale in primary as well as secondary markets, refurbishing of components for reuse in servicing the firms installed product base, take back of items for disassembly and direct resale or for materials recycling, performing the reverse logistical processes required for supporting a liberal return policy, etc. Based on extant literature from the supply chain management and OM fields, this study develops a conceptual typology of what roles the RSC can play in the firm’s efforts of achieving higher overall economic profits. Each role in the typology encompasses those RSC‐functions that support the role. The results of the study show four distinct RSC types: The logistician, the reuser, the servicer, and the reseller. Each role has its own distinguishable objective and set of functions. Further research is suggested for typology validation. A validated typology allows examination of the relations between specipfic RSC types and e.g. customer service, environmental responsibility, economic profit, material consumption, etc

Online Research Database In Technology

                       General rights Copyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright owners and it is a condition of accessing publications that users recognise and abide by the legal requirements associated with these rights.  • Users may download and print one copy of any publication from the public portal for the purpose of private study or research. • You may not further distribute the material or use it for any profit-making activity or commercial gain • You may freely distribute the URL identifying the publication in the public portal   If you believe that this document breaches copyright please contact us providing details, and we will remove access to the work immediately and investigate your claim.     Downloaded from orbit.dtu.dk on: Dec 20, 2017How manufacturers can use their reverse supply chain: a typology of reverse supplychain rolesLarsen, Samuel Brüning; Jacobsen, PeterPublished in:Abstract Book - DTU Sustain Conference 2014Publication date:2014Document VersionPublisher's PDF, also known as Version of recordLink back to DTU OrbitCitation (APA):Larsen, S., & Jacobsen, P. (2014). How manufacturers can use their reverse supply chain: a typology of reversesupply chain roles. In Abstract Book - DTU Sustain Conference 2014 Kgs. Lyngby: Technical University ofDenmark (DTU).   How manufacturers can use their reverse supply chain: a typology of reverse supply chain roles    Samuel Brüning Larsen*1, Peter Jacobsen2 1: DTU Management Engineering; 2: DTU Management Engineering,  *Corresponding author email: sbla@dtu.dk    Keywords: Reverse supply chain, reverse logistics, conceptual development, typology, roles  Abstract    While traditional forward supply chains end with customer markets, the reverse supply chain (RSC) both begins and ends with the firm’s markets. The study applies the prevalent conceptual RSC‐description in the theoretical field by Guide and Van Wassenhove (2009). In the description, the RSC begins with take back of used products and physical reverse distribution. Then, the RSC inspects and sorts products to determine the right disposition strategy. Finally, the RSC ends with product recovery and resale. Even though resale of unrecovered products, internal reuse, and disposal through waste streams is not explicitly part of the description, this study does include them as disposition strategies.            Although some RSC topics have been fairly well‐addressed in extant literature (e.g. product acquisition, inventory models and product disassembly), the RSC‐topic remains under‐explored (Pohkarel and Mutha, 2009; Kocabasoglu et al., 2007; Huscroft et al., 2013). In supply chain and operations management (OM) literature a RSC is usually seen as a straightforward one‐dimensional process, e.g. as the process described in the previous paragraph. However, a RSC can perform a variety of different functions for the firm. Among the many RSC‐functions are remanufacturing complete end‐products for resale in primary as well as secondary markets, refurbishing of components for reuse in servicing the firms installed product base, take back of items for disassembly and direct resale or for materials recycling, performing the reverse logistical processes required for supporting a liberal return policy, etc. Based on extant literature from the supply chain management and OM fields, this study develops a conceptual typology of what roles the RSC can play in the firm’s efforts of achieving higher overall economic profits. Each role in the typology encompasses those RSC‐functions that support the role.      The results of the study show four distinct RSC types: The logistician, the reuser, the servicer, and the reseller. Each role has its own distinguishable objective and set of functions. Further research is suggested for typology validation. A validated typology allows examination of the relations between specipfic RSC types and e.g. customer service, environmental responsibility, economic profit, material consumption, etc.    References Guide Jr, V. Daniel R., and Luk N. Van Wassenhove. "OR FORUM‐the evolution of closed‐loop supply chain research." Operations Research 57.1 (2009): 10‐18. Huscroft, Joseph R., et al. "Reverse logistics: past research, current management issues, and future directions." International Journal of Logistics Management, The 24.3 (2013): 304‐327. Pokharel, Shaligram, and Akshay Mutha. "Perspectives in reverse logistics: a review." Resources, Conservation and Recycling 53.4 (2009): 175‐182. Kocabasoglu, Canan, Carol Prahinski, and Robert D. Klassen. "Linking forward and reverse supply chain investments: the role of business uncertainty." Journal of Operations Management 25.6 (2007): 1141‐1160. 

How manufacturers can use their reverse supply chain: a typology of reverse supply chain roles

http://orbit.dtu.dk/ws/files/103602747/Abstract_Samuel_Br_ning_Larsen_v4.pdf

How manufacturers can use their reverse supply chain: a typology of reverse supply chain roles

Abstract

Similar works

Full text

Available Versions

Online Research Database In Technology