Particle size analyses were carried out on copper mine tailings from Lohan, Ranau Sabah.

About 99.64% of the tailing particles were < 1000 /lm in size while 52.23%,15.72% and 4.87%

were < 125 j.l.m, < 62.5 pm and < 38 j.l.m/respectively. The amount of heavy metal extracted by

0.5 HCI was in the order Mn > Cu > Ni > Zn > Co > Cd and is relatively higher in the finer tailing

particles

Jopony, Marcus

Mohamed, Murtedza

Usup, Gires

Universiti Putra Malaysia Institutional Repository

Pertanika 10(1), 37 - 40 (1987)Particle Size Distribution of Copper Mine Tailings fromLohan Ranau Sabah and its Relationship withHeavy Metal ContentMARCUS JOPONY, GlRES USUP and MURTEDZA MOHAMEDFaculty of Science and Natural Resources,UKM Sabah,88996 Kota Kinabalu, Sabah.Key words: Particle size; mine tailings.ABSTRAKAnalisis saiz partikel telah dilakukan terhadap tahi lombong tembaga' dari Lohan, RanauSabah. Sebanyak 99.64% danpada partikel tahi lombong tersebut didapati bersaiz < 1000 j.l.msementara 52.23%, 15.72% dan 4.87% masing-masing bersaiz < 125 j.l.m, <'62.5 j.l.m dan < 38 j.l.m.Kepekatan logam berat yang terekstrak dengan O. 5M HCI dalam turutan ialah Mn > Cu > Ni > Zn> Co Cd dan lebih tinggi pada partikel-partikel yang halus.ABSTRACTParticle size analyses were carried out on copper mine tailings from Lohan, Ranau Sabah.About 99.64% of the tailing particles were < 1000 /lm in size while 52.23%,15.72% and 4.87%were < 125 j.l.m, < 62.5 pm and < 38 j.l.m/respectively. The amount of heavy metal extracted by0.5 HCI was in the order Mn > Cu > Ni > Zn > Co > Cd and is relatively higher in the finer tailingparticles.INTRODUCTIONMalaysia's only copper mine, the Mamut CopperMine, is situated in Ranau, Sabah, at a height ofabout 1,500 metres above sea level. The minehas been in operation since 1975, and about 5million tones of ore are extracted annually. Mostof the minerals extracted are sulphide minerals,including chalcopyrite (Nagano et al., 1977).Tailing slurries from the mine are dis-charged through 15 kilometres of drop tankplumbing system into a square-shaped tailingspond which is located in the Lohan Valley about900 metres from the mine. The slurries containabout 50% solids and are separated at the pondfrom the liquid portion using cyclone pumps.The separated solids are used as embankmentmaterial to contain the liquid portion prior tofinal discharge into the nearby rivers.The mine tailings deposited into the pondare basically rock fragments resulting from thevarious stages of mineral ore processing at themine. Owing to their origin, they contain a widevariety of heavy metals in various proportions. Ithas been shown that the heavy metals such asCu, Zn, Ni and Co in the tailings were mainlypresent as sulphide minerals with the exchange-able plus soluble fractions being very low(Marcus, 1985). The present study was carriedout to determine the distribution of mine tailingparticles according to particle sizes, and therelationship between heavy metal content withparticle sizes.MATERIALS AND METHODSTailing samples were taken from three differentsites along the top embankment of the MamutCopper Mine tailings pond. The samples wereair-dried and then fractionated into selectedparticle size fractions ( < 1000 /lm, < 125 /lm,< 62.5 /lm and < 38./lm) using the appro-MARCUS JOPONY, GIRES USUP AND MURTEDZA MOHAMEDpriate sieves attached to a mechanical shaker.The percentage weight of each fraction wasdetermined and the four fractions were analysedseparately for extractable Mn, Cu, Ni, Zn, Coand Cd. The heavy metals were extracted for 12hours at room temperature using 0.5M HCl andlater determined by atomic absorption spectro-photometry (Perkin-Elmer model 2380).The pH of the < 1000 J.lm fraction wasmeasured in 1:2 suspension in distilled waterwhile its organic matter content was determinedthrough loss on ignition.~gfb0Sl<! 0200 400 600 BOO l00QRESULTS AND DISCUSSIONThe particle size distribution of the tailings areas shown in Table 1. It can be seen that the tail-ings consisted mainly of particles of < 1000 /.Lmin size. On average, 99.64% of the tailingsparticles were in the < 1000 /.Lm size fraction,while 52.23%, 15.72% and 4.87% were in the< 125 pm, < 62.5 /.Lm and < 38 p.m size frac-tions respectively. The weight percentagedecreased as particle size decreased, but therelationship was parabolic in nature as shown inFigure 1. The size distribution of the tailingparticles was expected to be governed by the. various processes used at the mine site during theseparation of the metals from their ores.The extractable heavy metal contents ofeach particle size fraction are as shown in Table2. The amount of extractable metal was in theorder Mn > Cu > Ni > Zn > Co > Cd. Theextracted amount did not give the total amountbut it was expected to include the more solubleforms of the metals. Marcus (1985) showed thatheavy metals in the tailings existed in variousFig. 1: Relationship between particle sizes andpercentage weight of tailingschemical forms, of which the mineral form wasless soluble.The amount of each metal extracted washigher in the finer frattions of the tailings. Thesmaller particles would definitely have greatertotal surface area and thus provide more extract-able amount of the metals. Similar correlationsbetween metal concentrations and particle sizehave been shown for riverine sediments (Wilberand Hunter, 1979; Forstner, 1982) and for soils(Le Riche and Wier, 1963; Fleming and Ryan,1964).The < 1000 J.lm fraction of the tailingswould include the finer fractions. Therefore thefiner fractions contributed to the overall extract-able metal contents of the coarser fraction.Based on the assumption that the proportions ofthe respective finer fractions in the <"lOOO'J.lmTABLE 1pH, organic matter content and percentage of tailing in each particle size fraction of thecopper mine tailingSamplingsiteIIIIIMean38% Organic Percentage of tailings in each fractionpH matter < 1000 J.lm < 125 m < 62.5,J.lffi <,38J.lffi7.1 0.31 99.41 45.62 15.66 5.205.2 0.68 99.80 53.54 Hj~_,1 4.266.0 0.62 99.72 57.83 15.18 5.146.1 0.54 99.64 52.23 15.72 4.87PERTANIKA VOL. 10 NO. I, 1987PARTICLE SIZE DISTRIBUTION OF COPPER MINE TAILINGSTABLE 2Amount of HCl extractable heavy metals in each particle size fraction of the copper mine tailingsSamplingConcentration in each fraction, J.lgg- 1Metalsite <1000 Jim <125 [.lm <62.5 J.l'm <38jJ.mMn I 360.13 433.29 449.13 482.06II 200.83 257.08 304.83 358.75III 273.75 303.38 304.00 368.44Mean 278.24 331.25 352.65 403.08Cu I 34.88 50.33 81.63 103.69II 88.75 123.25 172.63 231.88III 49.17 66.04 102.58 1~0.06Mean 57.60 79.87 118.95 151.88Ni I 65.91 9u.OO 133.79 173.06II 38.21 51.00 70.25 94.50III 35.04 41.96 62.71 87.13Mean 46.39 60.99 88.92 118.23Zn I 21.79 27.17 38.71 52.50II 28.00 33.04 45.04 63.31III 26.42 30.71 40.46 58.59Mean 25.40 30.31 41.40 58.17Co I 6.25 6.83 9.33 12.00II 4.75 5.58 7.71 10.13III 5.00 5.71 7.42 10.25Mean 5.33 6.04 8.15 10.79Cd I 0.83 1.00 1.08 1.31II 0.54 0.63 0.92 1.25III 0.54 0.71 1.00 I.l9Mean 0.64 0.78 1.00 1.25TABLE 3Contribution of the finer fractions of the tailings of the extractable amount of each heavy metalin the < 1000 J.lm fractionMetalMnCuZnCoCdContribution (%)>125 11m < 125[.lm < 62.5 11m < 38j.lm38.05 61.95 19.92 7.0327.84 72.16 32.46 12.7931.58 68.42 30.13 12.3637.90 62.10 25.62 11.1041.03 58.97 24.03 9.8236.58 63.52 24.56 9.47PERTANIKAVOL. IONO. I, 1987 39MARCUSJOPO Y, GIRES USUP AND MURTEDZA MOHAMEDfraction were not significantly different com-pared to their proportions in the whole tailings,the individual contribution of the finer fractionsto the extractable metal contents of the <1000 11m fraction are as shown in Table 3. The< 125 pm tailing fraction collectively contri-bute > 50% to the extractable amount of eachmetal in the < 100a 11m fraction.CONCLUSIONThe copper tailings were a mixture of particlesof sizes mainly < 1000)lID in diameter and theextractable heavy metal contents were higher inthe finer particles. These characteristics need tobe considered in future studies if they are to berelated with environmental pollution, such asdust pollution, presumed to be caused by thetailing dam.REFERENCESFLEMING, G.A. and P. RYA . (1964): Trans. 8th. Int.Congr. Soil Sci. IV: 297 - 308.FORSTNER, U. (1982): Accumulative phases of heavytnetals in limnic sediments. Hydrobiologia. 91:269-284.LE RICHE, H.H. and A.H. WEIR. (1963): j. Soil Sci.14: 225 - 235.MARCUS,]. (1985): Chemical forms of Cu, Zn, Ni andCo in soil and sediment of Ranau, Sabah.Pertanika. 8(3): 411·-415.NAGANO, K., S. IAKENOUCHI, H. IMAI, and T. SHOJI.(1977): Fluid inclusion study on the Mamutporphyry copper deposit, Sabah, Malaysia.Mining Geology. 27: 201 - 212.WILBER, w.e. and].V. HUNTER. (1979): The impactof urbanization on distribution of heavy metals inbottom sediments of the Saddle River. WaterResources Bull. 15: 790 - 800.(Received 4 October, I 986)40 PERTA IKA VOL. 10 O. 1,1987

Particle Size Distribution of Copper Mine Tailings from

Lohan Ranau Sabah and its Relationship with

Heavy Metal Content

http://psasir.upm.edu.my/2512/1/Particle_Size_Distribution_of_Copper_Mine_Tailings_from.pdf

Particle Size Distribution of Copper Mine Tailings from Lohan Ranau Sabah and its Relationship with Heavy Metal Content

Abstract

Similar works

Full text

Available Versions

Universiti Putra Malaysia Institutional Repository