Sample preparation has always been a tedious but important step in analysis involving Inductively

Coupled plasma emission spectrometry. In addition, it may also be a source of sample contamination.

The present work attempts to overcome these problems by nebulizing milk powder suspensions

directly into the plasma. Various infant and full cream milk powders were dispersed in water as well as

0.5% triton-X solution. The suspensions were then analysed for calcium, phosphorus, iron,

magnesium and sodium. These elements were successfully determined using inorganic standards with

the addition of an internal standard to correct for the difference in viscosities

Finlayson, R. K.

Lee, C. K.

Universiti Putra Malaysia Institutional Repository

Pertanika 9(3), 353 - 358 (1986)Analysis of Milk Powder by Direct Nebulization intoInductively-coupled Plasma IC.K. LEE and R.J. FINLAYSON*Department of Chemistry,Faculty of Science and Environmental Studies,Universiti Pertanian Malaysia,43400 Serdang, Selangor, Malaysia.Key words: ICP; nebulization; suspensions; infant milk powder; analysis.ABSTRAKPenyediaan sampel memakan masa tetapi perlu dalam analisis yang melibatkan spektrometripancaran Plasma Gandingan Aruhan. Sebagai tambahan, iajuga merupakan sumber bagi cemaransampel. Kajian ini cuba mengatasi masalah ini dengan memasukkan ampaian susu tepung terus kedalam plasma. Beberapa jenis susu tepung bayi dan penuh-krim diampaikan dalam air dan juga0.5% larutan Triton-X. Ampaian-ampaian ini dianalisis untuk mengetahui kandungan kalsium,fosforus, besi, magnesium dan natrium. Unsur-unsur ini telah ditentukan dengan menggunakanpiawaian tak organik dengan tambahan satu piawai dalaman untuk mengatasi perbezaan kelikatan.ABSTRACTSample preparation has always been a tedious but important step in analysis involving Induc-tively Coupled plasma emission spectrometry. In addition, it may also be a source ofsample contami-nation. The present work atterrz,pts to overcome these problems by nebulizing milk powder suspensionsdirectly into the plasma. Various infant andfullcream mz"lk powders were dispersed in water as well as0.5% triton-X solution. The suspensions were then analysed for calcium, phosphorus, iron,magnesium and sodium. These elements were successfully determined using inorganic standards withthe addition ofan internal standard to correct for the difference in viscosities.INTRODUCTIONThe use of inductively coupled plasmaatomic emission spectrometry to detect bothmetallic and non-metallic elements in a varietyof sample matrices has been well documented.However, a disadvantage is that it requires thesample to be in solution. This is usually timeconsuming, increases the opportunities forsample con.tamination and/or loss of sampleconstituents. In order to eliminate theseproblems, a more recent trend has been towardthe direct introduction of solid samples into theplasma. The methbds proposed include directsample insertion (Zhang et al., 1983; Kirkbrightand Walton, 1982), electrothermal carbon cupsample vaporization (Ng and Caruso, 1983),sample elevator technique using a high powerICP (Sommer and Ohls, 1980), spark elutriationof powders into ICP (Scott, 1978), laser ablation(Thompson et al., 1981) and slurry nebulization(Wilkinson et al., 1982; Sugimae et al., 1982;Schramel,1979).Gunn et al. (1977) reported the determi-nation of phosphorus in milk powders using aI A modified version of the paper has been presented at the Asian Chemical Conference, 1985 in Singapore.*Department of Analytical Chemistry, University of New South Wales, Australia.C.K. LEE AND R.J. FINLAYSONhigh frequency inductively-coupled argon plasmasource. A solution of milk powder in acetic acidwas prepared; pneumatic nebulization of theaqueous solution yielded results with a relativestandard deviation of 2%. They showed thatphosphorus in milk powder solution could beanalyzed relatively easily and accurately.Schramel (1979) determined boron and certainother metals in milk using an ultrasonicnebulizer and found the results acceptable: Inthis paper, we describe a rapid and convenientmethod in which the major elements in variousmilk powders are determined by direct nebuliza-tion of suspensions into the inductively-coupledplasma source.MATERIALS AND METHODSThe Inductively Coupled Plasma AtomicEmission Spectrometer (ICPAES) used was acommercially available Labtest Model 2000.The instrumentation and operating conditionsare listed in Table 1.A stop-flow nebulizer operating on Babing-ton principle (Moore et at., 1984) was used. Ithas great potential for the introduction of liquidswith high percentages of dissolved and suspend-ed solids. The computer programme allows for asweep.of argon gas in between analysis to elimi-nate crystal formation at the gas-liquid inter~face.Ca, Fe, Mg, Na and P were analysed atemission lines of 317.9,259.9,279.5, 588.9 ~nd178.2 nm respectively.Reagents and Materz"alsAll chemicals used were of analytieal re-agent grade from BDH Chemicals Ltd. All stocksolutions and dilutions were prepared with 2%aqua regia prepared from redistilled acids.Analysed milk powder samples were kindlysupplied by Wyeth Pharmaceuticals Pty. Ltd.and Nestle Regional Laboratory, New SouthWales, Australia.ProcedureFor dry ashing,. 3.2 g of the milk powder wasweighed accurately in duplicate, heated on a hotplate till charred and ashed in a furnace at450°C for 16 hours. The resulting ash was thendissolved in 2% aqua regia and made up to25 cm 3.TABLE 1ICP instrumentation and operating conditionsInstrumentationPlasma power supplySpectrometerDetectorNebulizerPlasma Operating Conditions.Forward powerReflected powerSpectrometer slitsArgon coolent flow rateArgon carrier flow rateViewing height354Labtest Model 2000, 0.4 - 2kW, 27.12 MHz.Labtest V25 vacuum spectrometer, 21 channels.Simultaneous AID conversions of all 21 phototube signals and dataprocessing performed in Labtest 3000 multi-processor micro computersystemLabtest stop-flow GMK nebulizer, sample flow rate 1.5 cm 3 min -1.1400 W5W20'/.L,m entrance, 50 - 70'Slm exit slits14.0 dm 3 min- 10.9 dm 3 min - 114 mm above coilPERTANIKA VOL. 9NO. 3,1986ANALYSIS OF MILK POWDER BY ICPTo prepare milk suspensions, 6.4 g milkpowder was weighed accurately and dispersed ineither distilled water or 0.5 % Triton-X solutionand made up to 50 cm 3. This gives reformulationof 128 g milk powder per dm 3 solution which isthe strength for feeding infants recommended bythe manufacturer. A ten-fold diluted formula-tion was prepared by dispersing 0.64 g milkpowder in either distilled water or 0.5% Triton-X solution. All milk suspensions were preparedin duplicates. Milk suspensions thus preparedwere found to be stable for more than a weekwhen kept at 4°C. They were analysed forcalcium, iron, magnesium, sodium andphosphorus on the ICP emission spectrometerusing (i) a milk suspension as calibration stan-dard, and (ii) inorganic standards withchromium as an internal standard for calibra-tion. Two inorganic standards were used. Themixed high inorganic-standard was made up of400 ppm Ca, 300 ppm P, 200 ppm N a, 40 ppmMg, 10 ppm Fe and 20 ppm Cr as internal stan-dard. The mixed low inorganic standard was aten-fold dilution of the high standard, retainingCr at 20 ppm. These standards were made up in2% aqua regia.RESULTS AND DISCUSSIONChoice of Dispersant and Concentration ofMilk PowderDispersion of the specially formulatedinfant milk powder in water and in 0.5% Triton-X solution does not seem to produce any dif-ference in the analytical results as shown inTable 2. However, Triton-X solution was pre-ferred as milk powder dispersed more readily init and this medium prevented adhersion ofparticles on to the walls of the tubings.In the case of the ordinary infant milkpowder and full cream milk powder, dispersionin water appeared to give slightly lower resultsthan dispersion in Triton-X solution as shown inTable 3. This could be due to the higher fatcontent in the milk powder which rendered itsdispersion in water less uniform.Milk suspensions prepared based on the re-formulation formula recommended by themanufacturer 128 g dm -3) did not differ frommilk suspensions which were ten-fold diluted intheir analyses as shown in Tables 2 and 3. In thestudy of direct aspiration of coal slurries into theICP using a similar nebulizer, Wilkinson et al.(1982) found that linearity was obtained forslurry concentrations up to approximately 20%w/v in 0.5% Triton-X solution in the manganeseemission signal. In the present study, the slurryconcentrations are 1.28% and 12.8% (w/v) inwater as well as in 0.5% Triton-X solution, thusit is not unexpected that the linearity of theelemental emission signals was observed. Thechoice of the ten-fold diluted formula was basedon physical observation. The time required toproduce a uniformly dispersed milk suspensionwas longer for the more concentrated formula-tion and the plasma showed some instabilities,like fluctuations of the reflected power when thesuspension was nebulized.Choice of StandardsThe compositions of the milk powdersstudied were determined by the dry ashingmethod. Five different batches of the speciallyformulated infant milk powder were obtainedand the dry ashing determinations agreed wellwith the manufacturer's specifications as shownin Table 2.In order to have close matching of samplesuspensions and standard suspensions withrespect to chemical and particle size composi-tion' one of the samples was used as a calibrationstandard for the analysis of the other samples.Results are shown in Table 2. There is a goodagreement between these results and thoseobtained after dry ashing.Assuming that the main difference betweena milk suspension and an aqueous solution is thatof the problem of transport arising from theirdifferences in particle size composition, the useof an internal standard should correct for thediscrepancies. The milk suspensions were thusanalysed using mixed inorganic standards withCr as an internal standard. The results in TablePERTANIKA VOL. 9 NO.3. 1986 355':;"~'"TABLE 2Comparison of various analytical methods for a special infant milk powderConcentration of elements (mg dm -5) based on reformulation of 128 g milk powder per dm 5solutionAnalytical ~ethod Ca Fe Mg Na PSample Sample Sample Sample SampleA B C D E A B C D E A B C D E A B C D E A B C D ELow temp. ash,aqueous nebulization' 439 439 472 470 462 13.7 13.9 13.9 13.7 13.4 49.5 48.5 51.5 51.5 52.5 126 145 131 129 127 308 308 315 321 313Z Manufactures'0 specification 444 12.7 53 150 330V');:..Slurry nebulization<t:....lZ a) Milk suspension (D)i:i: as calibration'"'standard 443 454 459 - 454 13.1 13~3 13.4 - 13.3 48.8 49.9 50.5 - 51.5 123 126 127 - 131 305 316 314 - 315~Cl b) Mixed aqueous low 459 454 458 471 455 13.0 12.9 13.0 13.3 12.6 49.8 49.8 50.2 51.5 51.1 122 128 122 129 120 317 325 318 325 319Z inorganic std. as<t:calibration std. 459* 13.0 48.9* 128*~~c) Mixed aqueous high 440 447 446 460 444 12.8 13.0 13.0 13.1 13.0 49.0 50.1 49.9 51.2 50.7 129 130 130 130 135 309 308 315 316 314....l~ inorganic std. as 462*U calibration std. **465 464 474 476 455 12.3 12.9 12.4 12.8 13.3 51.5 50.7 52.451.0*51.4 137 136 132 131*' 123 357 357 358 341*339d) Mixed high inorganicstandard in 0.5% T-X 443 452 447 457 444 12.4 12.6 12.2 12.9 12.2 49.5 50.1 49.8 50.5 50.7 117 122 1~3 129 121 288 299 289 316 292RSD for replicate 1.05% 0.56% 0.71% 1.52% 1.30%preparationsRSD for 10 integrationsfor each samplepreparation <1.05% <2.5% <1.0% <2.5% <3.0%Sample A, B, C, D and E are five different batches of the infant milk powder.*The milk powder was dispersed in water."Concentration of milk suspensions was 6.4 in 50 cm 5 Triton-X solution.<.000Olc<'loZ0>...jo><t:~Z<t:f-o~~l:l..<.0.nc<'lTABLE 3Comparison of various analytical methods for ordinary infant milk powder.infant soy and full cream milk powderConcentration of elements (mg dm -3) based on reformulation of128 g milk powder per dm 3 solutionr--ll")c<"lCa Fe Mg Na PAnalytical Method Infant Infant Full Infant Infant Full Infant Infant Full Infant Infant Full Infant Infant Full~ soy cream soy cream. soy cream soy cream soy creamU --- --- ----F G F G F G F G F G:>< <000l:Q ~~ Low temp. ash,W aqueous nebulization 726 702 565 1157 8.7 9.4 12.6 - 72.4 68.5 66.5 116 ' 297 273 305 477 554 518 443 924 ot'iCl 0~ Slurry nebulization0 Z~ 760 706 557 8.8 9.2 9.0. 0'>a) Mixed aqueous low 1223 - 76.7 71.8 65.5 120 299 277 273 471 589 540 400 945...i~...l inorganic std. as 724* 1188* 8.9* 72.5* 277* 446* 547* 910* 0~ calibration std. ><~b) Mixed aqueous high 760 700 549 1225 8.3 9.1 9.8 77.8 72.1 65.8 126 305 280 285 476 589 516 382 ~0 - 945 Z~ inorganic std. as 743* 1206* 8.8 74.9* 129* 300· 472* 603* 1012* <Vlcalibration std. **745 695 9.3 9.8 76.~ 69.0 291 268 613 567 f-o;>-~. ~c) Mixed high inorganic 759 1225 8.8 77.8 1~6 288 473 575 960 wZ - ~< Std in 0.5% T-XRSD for 10 integrationsfor each samplepreparation°<1.0% <2.0% <J.O% <2.0% <2.5%F. G are two diff~r.ent batches of the ordinary infant milk powder.·The milk powder was dispersed in water. .··Concentration of milk suspensions was 6.4 g in 50 cm 3 Triton-X solutionC.K. LEE AND R.J. FINLAYSON2 showed that this could indeed overcome theproblem.As the milk suspensions were prepared in0.5% Triton-X solution, an inorganic standardprepared in 0.5% Triton-X solution was used tosee if there could be any improvement in theanalytical results. There were, however, no greatdifferences. The simplest and most directmethod of analysis is, therefore, to use an in-organic standard with an internal standard anddirect nebulization of the milk suspensionsprepared in 0.5% Triton-X solution.Analysis ofMilk PowdersIn addition to the specially formulated milkpowders, an infant soybean substitute for milk,an ordinary infant milk powder and a full creammilk powder were analysed using slurry nebuliza-tion. The results in Table 3 show these agreedwell with the determinations obtained by slurrynebulizations and aqueous nebulization ofsamples after dry ashing.The precision of the method was estimatedby carrying out replicate analyses of the fivebatches of specially formulated infant milkpowders. Two separate suspensions were pre-pared for each batch of the milk powder and tenreplicate analyses were then made on each ofthese solutions. The average relative standarddeviations are shown in Table 2. The relativestandard deviations for replicate preparationsfor all the elements were less than 2%. Replicateanalyses on each solution yield relative standarddeviation of < 1.0% to< 3.0%, varying fromelement to element.ACKNOWLEDGEMENTThe authors would like to express theirthanks to the Australian Universities Inter-national Development Programme (AUIDP) formaking possible C.K. Lee's visit to the Universitiof New South Wales and for financing theresearch project.REFERENCESGUNN, A.M., C.F. KIRKBRIGHT and L.N. OPHELM.(1977): Determination of phosphorus in milkpowders by optical emission spectrometry with ahigh frequency inductively-coupled argon plasmasource. Anal. Chern. 49(11): 1492 - 1494.KIRKBRIGHT, C.F. and S.]. WALTON. (1982): Opticalemission spectrometry with an inductivelycoupled radio frequency argon plasma source anddirect sample introduction from a graphite rod.Analyst. 107: 276 - 281.MOORE. C.L., P.]. HUMPHRIES CUFF and A.E.WATSON. (1984): The transport efficiency of aCMK nebulizer in emission spectrometry using aninductively coupled plasma. ICP informationNewsletter, 9(12): 763 - 777.Nc, K.C. and].A. CARUSO. (1983): Volatilization ofzirconium, vanadium, uranium and chromiumusing electrothermal cup sample vaporizationinto an inductively coupled plasma. Analyst, 108:476 - 480.SCOTT. R.H. (1978): Spark elutriation of powders intoan inductively coupled plasma. SpectrochimicaActa, 33B: 123 - 125.SCHRAMEL. P. (1979): Determination of boron in milkand milk products by ICP analysis. Z. Lebensun,Unters. Forsch. 169: 255 - 258.SOMMER. D. and K. OHLS. (1980): Direct sample inser-tion into a stable running inductively coupledplasma. Fressenins Z. Anal. Chem. 304: 97 - 103.SUGIMAE. A. T. MIZOGUCHI.(1982): Atomic emissionspectrometric analysis of airborne particulatematter by direct nebulization of suspensions intothe inductively coupled plasma. AnalyticChimica Acta, 144: 205 - 212.THOMSON. M., J.E. COMETER and F. SIEPER. (1981):Laser ablation for the introduction of solidsamples into an inductively coupled plasma foratomice~ission spectrometry. Analyst 106: 32-39.WILKINSON. J.R., L. EBDON and K. W. JACKSON.(1982): Determination of volatile trace metals incoal by analytical atomic spectroscopy. Anal.Proc. 19: 305 - 307.ZHANG. L.X., C.M. KIRKBRIGHT. M.J. COPE andJ.M. WATSON. (1983): A microprocessor-controll-ed graphite rod direct sample insertion device forinductively coupled plasma optical emission spec-trometry. Applied. Spec. 37(3): 250 - 254.(Received 7 February, J 986)358 PERTANIKA VOL. 9 NO.3, 1986

Analysis of Milk Powder by Direct Nebulization into

Inductively-coupled Plasma

http://psasir.upm.edu.my/2331/1/Analysis_of_Milk_Powder_by_Direct_Nebulization_into.pdf

Analysis of Milk Powder by Direct Nebulization into Inductively-coupled Plasma

Abstract

Similar works

Full text

Available Versions

Universiti Putra Malaysia Institutional Repository