Friction of iron lubricated with aliphatic and aromatic hydrocarbons and halogenated analogs

Abstract

The influence of oxygen and various organic molecules on the reduction of the friction of an iron (011) single crystal surface was investigated. A comparison was made between aliphatic and aromatic structures, all of which contained six carbon atoms, and among various halogen atoms. Results of the investigation indicate that hexane and benzene give similar friction coefficients over a range of loads except at very light loads. At light loads, the friction decreased with an increase in the load where the halogens fluorine and chlorine are incorporated into the benzene molecular structure; however, over the same load range when bromine and iodine were present, the friction was relatively unchanged. The aliphatic compound chlorohexane exhibited lower friction coefficients than the aromatic structure chlorobenzene at very light loads. With the brominated benzene structures, however, friction was essentially the same. Oxygen was more effective in reducing friction than were the simple hydrocarbons