A guide for DADiSP software, intended for use by the Lambda Point Experiment (LPE) Team during and after the United States Microgravity Payload (USMP)-1 mission, is presented. DADiSP is a Data Analysis and Display Software developed and marketed by DSP Development Corporation, Cambridge, Massachusetts. This guide is intended to be used in addition to the DADiSP Worksheet User Manual and Reference Manual which are supplied by the company with the software. Technical support for DADiSP is available from DSP at (617) 577-1133. Access to DADiSP on Acceleration Characterization and Analysis Project (ACAP) EGSE is being provided to the LPE team during USMP-1 for off-line processing of SAMS data

Rogers, Melissa J. B.

English

NASA Technical Reports Server

A1. DADISP PROCESSING GUIDE
DADiSP PROCESSING GUIDE
M. J. B. Rogers
7 October 1992
A-1
N93-26949
The following is a guide for DADiSP software, intended for use by the Lambda Point
Experiment Team during and after the USMP-1 mission. DADiSP is a Data Analysis and Display
Software developed and marketed by DSP Development Corporation, Cambridge, Massachusetts.
This guide is intended to be used in addition to the DADiSP Worksheet User Manual and
Reference Manual which are supplied by the company with the software. Technical support for
DADiSP is available from DSP at (617) 577-1133.
Access to DADiSP on ACAP EGSE is being provided to the LPE team during USMP-1
for off-line processing of SAMS data.
https://ntrs.nasa.gov/search.jsp?R=19930017760 2020-03-17T05:25:15+00:00Z
A-2
TO GET FROM DOS PROMPT TO DADISP WORKING ENVIRONMENT (A
WORKSHEET)
DISPLAY OR
HIGHLIGHTED OPTION
DOS PROMPT C:_>
C:\SAMS>
LIST OF AVAILABLE
LABBOOKS / OPEN
HIGHLIGHTED ON BAR
MENU
LIST OF DATASETS AND
WORKSHEETS /
WORKSHEET
HIGHLIGHTED ON BAR
MENU
ACTION TO TAKE
CD SAMS
DADISP
ENTER TO OPEN
LABBOOK AND TYPE
OR SELECT LABBOOK
OF INTEREST /SEE *
BELOW FOR OTHER
OPTIONS ON BAR
MENU
ENTER TO OPEN
WORKSHEET, THE
WORKING
ENVIRONMENT / SEE
** BELOW FOR OTHER
OPTIONS ON BAR
MENU
RESULT
CHANGES TO SAMS
DIRECTORY
OPENS DADISP SOFTWARE
PACKAGE
OPENS LABBOOK OF
INTEREST
OPENS WORKSHEET OF
INTEREST
A-3
*BAR MENU OPTIONS UPON ENTERING DADISP
*BAR MENU OPTION
OPEN
CREATE
DIRECTORY
UTILITIES
EXIT
ASSOCIATED ACTION
/ OPTION
ii
OPENS LABBOOK
BASED ON CLICKED
UPON OPTION OR
TYPED SELECTION
CREATES A NEW
LABBOOK
MOVE TO DIFFERENT
DOS DIRECTORY
COPY - COPY
LABBOOK
DELETE - DELETE
LABBOOK
LOAD - LOAD
COMMAND FILE
EXIT TO DOS
ill
POTENTIAL USES
ACCESS LABBOOK OF
INTEREST
CREATE LABBOOK FOR NEW
WORK
ACCESS LABBOOKS SAVED
IN LOCATION OTHER THAN
C:kDSP
DO WORK WITH DIFFERENT
DATA BASED ON WORK IN
ANOTHER LABBOOK
COMMAND FILES CAN BE
WRITTEN TO PERFORM
OPERATIONS
A-4
"*BAR MENU OPTIONS UPON ENTERING A LABBOOK
**BAR MENU OPTIONS
WORKSHEET
UTILITIES
INDEX
CLOSE
ASSOCIATED ACTION /
OPTION
OPENS WORKSHEET
BASED ON CLICKED
UPON OPTION OR
TYPED SELECTION
DELETE - DELETE
SELECTED DATASET
OR WORKSHEET
IMPORT (DATA)
EXPORT (DATA)
COPY - COPY
SELECTED DATASET
OR WORKSHEET
LISTS CONTENTS OF
SELECTED DATASET
CLOSES CURRENT
LABBOOK
POTENTIAL USES
WORKSHEETS ARE THE
BASIC WORKING
ENVIRONMENT
IMPORT DATA FILE FROM
DIRECTORY
EXPORT DATA FILE TO
DIRECTORY
ALLOW USER TO SEE WHICH
DATA SERIES ARE IN A
SELECTED DATASET
A-5
***BAR MENU OPTIONS UPON ENTERING A WORKSHEET
***BAR MENU OPTIONS
LOAD
SAVE
ADD
REMOVE
ENTER
CLOSE
ASSOCIATED ACTION /
OPTION
LOADS AN EXISTING
WORKSHEET
SAVES CURRENT
WORKSHEET
ADD WINDOWS TO
WORKSHEET
REMOVE WINDOWS
FROM WORKSHEET
ENTER WINDOW IN
WORKSHEET
ENVIRONMENT
CLOSES CURRENT
LABBOOK
POTENTIAL USES
CONTINUE PREVIOUS WORK
OR USE EXISTING
WORKSHEET AS PROCESSING
GUIDE
SAVE FOR CONTINUED
WORK OR AS PROCESSING
GUIDE
CALCULATIONS ARE
PERFORMED AND PLOTTED
IN SEPARATE WINDOWS
REMOVE UNNECESSARY
WINDOWS AND CUSTOMIZE
WORKSHEET STYLE
NECESSARY TO HAVE
WINDOW SELECTED TO
WORK IN IT; ALSO DONE BY
CLICKING IN WINDOW
A-6
FUNCTION KEYS FOR USE IN WORKSHEET ENVIRONMENT
FI ON-LINE HELP
F2 DISPLAY BACKGROUND (HEADER) INFORMATION FOR SELECTED
WINDOW (THESE VALUES ARE SET WHEN DATA FILE IS IMPORTED)
F3 ACTIVATES LINE EDITOR FOR SELECTED WINDOW
F4 OVER.PLOT - ALLOWS SEVERAL WINDOWS TO BE PLOTTED IN ONE
WINDOW
F5 TOGGLES THROUGH DIFFERENT AXIS SCALE OPTIONS
F6 PUTS VARIOUS GRIDS ON PLOT
=,
F7
F8
F9 SAVE DATASET
F10
TOGGLES BETWEEN DIFFERENT DISPLAY OPTIONS (LINE PLOT, BAR
GRAPH, TABLE VIEW)
LOAD DATASET
ZOOM; ONCE ZOOMED, F9 PROVIDES CROSSHAIRS WHICH CAN BE
MOVED BY MOUSE OR ARROW KEYS FOR FINER CONTROL, F9
AGAIN LOCKS FIRST CROSSHAIRS AND PROVIDES A SECOND SET;
POSITIONS IN DATA FILE AND POSITION RELATIVE TO FIRST
CROSSHAIR, IF APPLICABLE, DISPLAYED AT BOTTOM OF SCREEN.
R/GIlT MOUSE BUTTON OR ESC KEY REMOVES CROSSHAIRS AND
ZOOM.
A-7
MAIN MENU
HELP
LOAD AND SAVEDATA
EDIT/REDUCEDATA
GRAPHICAL VIEWS
CREATENEW VIEW
VIEW CONTROLS
MATH AND MATRICES
STATISTICS
ANALYZE PEAK
FFT ANALYSIS
WORKSHEET
PRINTSAND PLOTS
OPTIONAL MODULES
SETUNITS
SETDELTA OFFSET
SETCOLORS
SETSCALEINFORMATION
A-8
TYPICAL DADiSP PROCESSING SCHEME FOR LPE DURING USMP-1
SETTING UP A DADiSP PROCESSING GUIDE
ENTER DADiSP
CREATE LABBOOK - LPE GUIDE
OPEN- LPE GUIDE
E
UTILITIES- IMPORT- DATA FILE (AT 250 Hz SAMPLING FREQUENCY) FORMED
BY CONVERT ROUTINE, HEADER FILE SET UP BY
CONVERT, CARRIAGE RETURN
WORKSHEET - ADD - 9 ENTER
W1 - CLICK IN W1 TO ACTIVATE WINDOW
F8 TO LOAD X-AXIS SERIES IN W1, SELECT DATASET
W2- W1-MEAN(W1) - DEMEANS Wl
W3 - (PSD(W2)/4)*(LENGTH(W2))/250
CALCULATES AND PLOTS PSD OF DEMEANED DATA SUCH
THAT (grms) 2 = _PSD
W4-W9 REPEAT WITH Y- AND Z- AXIS DATA
SAVE- PSD GUIDE
SAVES WORKSHEET TO BE USED AS PROCESSING GUIDE
SELECT EXIT/CLOSE FROM BAR MENU
CLICK RIGHT MOUSE BUTTON
HIT ESC KEY
THE ABOVE ARE THREE WAYS TO GET OUT OF DADiSP
TYPICAL DADiSP PROCESSING SCHEME FOR LPE DURING USMP-1
USING A DADiSP PROCESSING GUIDE
ENTER DADiSP
OPEN- LPE GUIDE
UTILITIES - IMPORT - NEW DATA FILE
WORKSHEET- LOAD - PSD GUIDE
W1 - CLICK TO ACTIVATE
F8 - TO LOAD NEW X-AXIS SERIES FROM DATASET
W2/W3- NEW DATA WILL PROPAGATE THROUGH WINDOWS
CONTINUE BY LOADING Y- AND Z- AXIS DATA INTO W4 AND W7
ADDITIONAL PROCESSING
NARROW BAND SPECTRAL ANALYSIS
CUMULATIVE SPECTRAL ANALYSIS
NARROW BAND grins
DIFFERENCING OF SPECTRA
COMPARISON OF SPECTRUM OF LONG TIME WINDOW
AVERAGED SPECTRA OF SUCCESSIVE TIME WINDOWS
A-9
TO
A-IO
A2. ACAP POCC OPERATIONS PROCEDURES
ACAP Sun Operations for USMP-1
Desired Operation/Information
real-time sun ethemet address
real-time sun login
real-time sun password
real-time directories of interest
play back sun ethemet address
play back sun Iogin
play back sun password
play back directories of interest
starting shell routine to run real-time or
playback recording/processing systems
necessary input for initialization
Procedure
128.158.29.121 (samsonl)
sams
/home/samsonl/sams : working directory
/home/samsonl/sams/data: data directory
note that data directory is a common
directory with real-time 486
128.158.29. (samson2)
$ams
/home/samson2/sams : working directory
/home/samson2/sams/data: data directory
note that data directory is a common
directory with real-time 486
type sams2rt, wait for data stream to start
bias, temperature, a0, and al for x, y, z
(can be changed anytime during run)
A-11
recognizingdataloss
formation of data files
data file format and namin_ convention
status check should identify short term bad
data
LOS will result in DQM status=3 response
upon status check
LOS will also result in zero values being
passed to peak value plots
done automatically through shell program,
default data file length is 5 minutes, can set
to lengths of 1 min to 60 min upon startup
of shell routine or anytime during run;
peak value data file default length is 30 min,
can set from 1 min to 60 rain
see attached sheets
ACAP 486 Operations for USMP-1
A-12
Desired Operation/Information
real-time 486 LOGIN sams
real-time 486 PASSWORD ******
play back 486 LOGIN sams
play back 486 PASSWORD
real-time 486 ethernet address
play back 486 ethernet address
directories of interest
accessing (forming) data files from Sun
starting and runnin_ dadisp
Procedure
128.158.29.125 (delilah_l)
(delilahA)
c:\sams\acap processing directory
e: data directory (common with sun \data)
in acap directory type CONVERT to start
program which prompts for start time, axes,
engineering, peak value, total time
information
see DADISP operations sheet
A-13
Sun Disk Storage Naming and Format Convention
Engineering Unit (X, Y, and Z axis) data
Variable length files: 5 minute default, can be set to lengths 1 minute to 60 minutes
Name: RDHHMMSS.EU or PDHHMMSS.EU
where first character R denotes real-time data and P denotes playback data
the D denotes mission day and is a hex character
hours, minutes, and seconds (HHMMSS) are ASCII characters
File type: binary
Units:
Format: T 1 (hhmmss)
TEMPx,y,z
Xt
X2
X3
X25o
Yt
Y2
Y3
Y25o
ZI
Z2
Z3
Z25o
STATUS WORDS
A-14
Peak Value Data (X1MAx2+Y1MAX2+Z1MAX2) 1/2
Variable length files: 30 minute default, can be set to lengths 1 minute to 60 minutes
Name: RDHI-IMMSS.MA or PDHHMMSS.MA
where first character R denotes real-time data and P denotes playback data
the D denotes mission day and is a hex character
hours, minutes, and seconds (HHMMSS) are ASCII characters
File type: Floating point
Units:
Format"
TI
T2
T3
(XIMAX2+YIMAx2+ZIMAX2)I/2
(XIMAX2+YIMAX2+ZIMAX2)I/2
(XIMAX2+YIMAX2+ZIMAX2)I/2
(X_M_+Y_M_+Z_M_) I/2
(XIMAX2+YIMAX2+ZIMAX2)I/2
(XIMAX2+YIMAx2+ZIMAX2)I/2
A3. ACAP POCC MALFUNCTIONS PROCEDURES A-15
MALFUNCTION PROCEDURE
REAL-TIME SUN SYSTEM CRASH
WHILE AOS
R/T DATA FLOWING
NO P/B DATA FLOWING
l)
2)
3)
4)
RE-BOOT R/T SYSTEM
a) RE-BOOT SUCCESSFUL - CONTINUE AS
IS
b) RE-BOOT UNSUCCESSFUL- PROCEED
TO STEP 2)
EXIT AND RESTART DATA COLLECTION
PROGRAM ON P/B SUN SO THAT IT IS SET
TO RECEIVE R/T DATA (NECESSARY FOR
APPROPRIATE FILE NAMES)
SWITCH REAL-TIME DATA FLOW
BETWEEN SUN SYSTEMS
RE-BOOT CRASHED SUN
a) RE-BOOT SUCCESSFUL - RESTART DATA
COLLECTION PROGRAM ON RE-BOOTED SUN
TO RECEIVE P/B DATA (DO NOT SWITCH
!
BACK UNLESS ANOTHER PROBLEM COMES
UP OR THERE IS A CONVENIENT TIME TO DO
SO, i.e. LOS AND NO R/T OR P/B DATA
FLOWING)
b) RE-BOOT UNSUCCESSFUL - LEAVE SET-
UP AS IS AND CONTINUE TO TRY SUN RE-
BOOT; MAY BE NECESSARY TO CONTACT EB
LAB PERSONNEL OR SUN TECHNICAL
SUPPORT FOR ADVICE; NOTE THAT THIS
MEANsTHATvia DATACANNOTBE .....
RECEIVED SO ARRANGE TO HAVE P/B DATA
SENT AFTER SUN RE-BOOTED (SUBMIT A
PDRF THROUGH LPE WHEN SUN RE-BOOTED;
MUST KEEP TRACK OF LOS TIMES WHILE
SUN IS DOWN)
A-16
REAL-TIME SUN SYSTEM CRASH
WHILE LOS
NO Rfr DATA FLOWING
NO P/B DATA FLOWING
REAL-TIME SUN SYSTEM CRASH
WHILE LOS
NO R/T DATA FLOWING
P/B DATA FLOWING
1) MORE THAN 5 MINUTES TO AOS
a) RE-BOOT REAL-TIME SUN WITHOUT
SWITCHING DATA FLOW
b) RE-BOOT SUCCESSFUL - CONTINUE AS IS
c) RE-BOOT UNSUCCESSFUL - FOLLOW Rfr
CRASH WHILE AOS PROCEDURE STARTING
AT STEP 2)
2) LESS THAN 5 MINUTES TO AOS
FOLLOW R/T CRASH WHILE AOS PROCEDURE
STARTING AT STEP 1)
I) LESS THAN 5 MINUTES TO AOS - FOLLOW
PROCEDURES FOR R/T CRASH WHILE AOS
STARTING AT STEP 1)
NOTE THAT SUN CRASH RECOVERY PROCEDURES ARE BASED ON THE ASSUMPTION
THAT RECEIVING REAL-TIME DATA IS A HIGHER PRIORITY THAN PLAY BACK DATA
A-17
i
MALFUNCTION
PLAY BACK SUN SYSTEM CRASH
, R/T DATA FLOWING
R/T DATA NOT FLOWING
PROCEDURE
l)
2)
RE-BOOT PLAY BACK SUN
ONCE SYSTEM IS RUNNING, HAVE LPE
SUBMIT A PDRF (OD) TO RECOVER ANY
LOST DATA
A-18
MALFUNCTION
REAL-TIME SUN MONITOR
FAILURE
R/T DATA FLOWING OR NOT
P/B DATA FLOWING OR NOT
PLAY BACK SUN MoNrrOR
FAILURE
R/T DATA FLOWING
P/B DATA FLOWING OR NOT
PROCEDURE
1) REPLACE R/T MONITOR WITH SPARE
2) RECONFIGURE R/T SYSTEM AND MONITOR
AS NEEDED
1) HOOK UP SPARE MONITOR TO P/B SUN
2) RECONFIGURE P/B SYSTEM AND MONITOR
AS NEEDED
REAL-TIME 486 MONITOR • HOOK UP SPARE FROM DATA CENTER
FAILURE
PLAY BACK 486 MONITOR * HOOK UP SPARE FROM DATA CENTER
FAILIYRE
OFF-LINE 486 MONITOR FAILURE • HOOK UP SPARE FROM DATA CENTER
1)REAL-TIME SUN FILE SERVER
FAILURE
PLAY BACK SUN FILE SERVER
FAILURE
RE-BOOT R/T SUN
a) RE-BOOT SUCCESSFUL - CONTINUE AS IS
b) RE-BOOT BRINGS SYSTEM UP BUT FILE
SERVER STILL SEEMS TO BE DOWN
i) CONTACT SUN TECHNICAL SUPPORT
ii) CONTACT DIANE JOHNSON AT SUN TO
BORROW ONE
1) RE-BOOT P/B SUN
a) RE-BOOT SUCCESSFUL - CONTINUE AS IS
b) RE-BOOT BRINGS SYSTEM UP BUT FILE
SERVER STILL SEEMS TO BE DOWN
i) CONTACT SUN TECHNICAL SUPPORT
ii) CONTACT DIANE JOHNSON AT SUN TO
BORROW ONE
REAL-TIME SUN TAPE DRIVE
FAILURE
A-19
PLAY BACK SUN TAPE DRIVE
FAILURE
REAL-TIME 486 CRASH
PLAY BACK 486 CRASH
OFF-LINE 486 CRASH
1) COORDINATE SCHEDULING OF TAPE
ARCHIVING SO THAT ONE TAPE DRIVE CAN
BE USED FOR BOTH R/T AND P/B
2) SHOULD BOTH TAPE DRIVES FAIL
a) CONTACT SUN TECHNICAL SUPPORT
b) CONTACT DIANE JOHNSON AT SUN TO
BORROW ONE
1) COORDINATE SCHEDULING OF TAPE
ARCHIVING SO THAT ONE TAPE DRIVE CAN
BE USED FOR BOTH R/T AND P/B
2) SHOULD BOTH TAPE DRIVES FAIL
a) CONTACT SUN TECHNICAL SUPPORT
b) CONTACT DIANE JOHNSON AT SUN TO
BORROW ONE
1) REBOOT R/T 486
2) RE-BOOT SUCCESSFUL - CONTINUE AS IS
3) RE-BOOT UNSUCCESSFUL - SWITCH R/T AND
OFF-LINE 486 AND BRING IN SPARE FROM
DATA CENTER
1) REBOOT P/B 486
2) RE-BOOT SUCCESSFUL - CONTINUE AS IS
3) RE-BOOT UNSUCCESSFUL - SWITCH P/B AND
OFF-LINE 486 AND BRING IN SPARE FROM
DATA CENTER
1) REBOOT OFF-LINE 486
2) RE-BOOT SUCCESSFUL - CONTINUE AS IS
3) RE-BOOT UNSUCCESSFUL - BRING IN SPARE
FROM DATA CENTER
VIDEO RECORDER FAILURE * SWITCH WITH SPARE FROM DATA CENTER
A-20
MALFUNCTION PROCEDURE
INTERRUPTED DATA FLOW
NOTED ON REAL-TIME SYSTEM
(BESIDES LOS)
1) CHECK DATA BOX FOR DATA FLOW
INDICATION
a) DATA FLOW LIGHT NOT FLASHING
(DATA NOT FLOWING) - MAKE SURE DATA
ARE EXPECTED ON PARTICULAR SYSTEM
(i.e., CHECK FOR AOS/LOS SITUATION), IF
DATA ARE EXPECTED, CONTACT SYS CON
ON POCC OPS LOOP
b) DATA FLOW LIGHT IS FLASHING, BUT
DATA BEING RECEIVED IS "BAD,"
i) CONTACT SAMS TEAM (SCI LOOP 2)
TO CHECK IF THIS IS A SAMS RECORDING
PROBLEM, IF SO LET SAMS HANDLE 1T
i_ IF NOT A SAMS SYSTEM PROBLEM,
AND STILL RECEIVING "BAD" DATA,
CONTACT SYS CON ON POCC OPS LOOP
C) DATA FLOW LIGHT IS FLASHING, BUT
NO DATA BEING RECEIVED, PROBABLY
EGSE PROBLEM
CHECK COMPUTER CONNECTIONS
AND TIGHTEN LOOSE PARTS, AS
NECESSARY
ii) EXIT DATA COLLECTION PROGRAM
AND RESTART
iii) EXIT DATA COLLECTION PROGRAM
AND RE-BOOT SYSTEM
iv) FOLLOW MAL PROCEDURES FOR
SYSTEM CRASH FOR APPROPRIATE R2T -
P/B DATA FLOW SITUATION
v) CALL SOMEONE
2) SUBMIT OD PDRF THROUGH LPE FOR LOST
DATA
A-21
SWITCHING SUN SYSTEMS
BETWEEN REAL-TIME AND PLAY
BACK DATA
1) SWITCH CHANNELS ON CONTROL BOARD
2) REQUEST SWITCH FROM SYS CON ON POCC
OPS LOOP
MALFUNCTION
VIDEO FAILURE
HVODS FAILURE
POCC TERMINAL FAILURE
PROCEDURE
• SUBMIT VIDEO PDRF
• FORMS IN ACAP OPERATIONS NOTEBOOK
• FOLLOW PROCEDURE IN POH - SOP 1.7.1 -
CONTACT MARSHALL COMM ON POCC OPS
LOOP
• FOLLOW PROCEDURE IN POH - SOP 1.7
**NOTE - SEE TABLE 1.7-I (p. 1.7-2) IN POH FOR SUMMARY OF PROCEDURES FOR POCC
EQUIPMENT PROBLEMS
A-22 k-23
AP POCC LOGBOOK
_ET
T:
S GMT:
3
)9
LOG NOTE
SIMULATION START
ORBITER TO REACH CONJUNCTION WITH TURKISH
SATELLITE AT 4/23; MANEUVER WILL BE
NECESSARY; OMS BURN OR PRCS BURN PROPOSED
FOR IMU ALIGN PERIOD SCHEDULED AT 4/19; IF
WAIT LONGER THAN THAT, WILL HAVE TO DO
BIGGER BURN.
PROPOSED BURN IS +X PRCS OF 2 FT/SEC, DURATION
1-2 SEC
REQUEST FROM LPE TO INFORM THEM OF
ACCELERATION PEAK VALUES ASSOCIATED WITH
MANEUVER
CALLED SIM SUP (0424) TO REQUEST GUIDANCE ON
PROVIDrNG LPE WITH ACCELERATION VALUES (CAN
BE GET ESTIMATED VALUES FROM ANYONE);
RESPONSE WAS TO MAKE OUR OWN ESTIMATE
CONTACT POL TO REQUEST INFORMATION ON
UPCOMING MANEUVER BURN: PRCS 1-2 FT/SEC,
DURATION OF A COUPLE OF SECONDS, STILL SET
FOR 4/19
IMU ALIGN TO OCCUR AFTER MANEUVER
PRCS MANEUVER START
INFORMED BY SIM TEAM TO NOTIFY ANYONE WHO
INQUIRES THAT PRCS BURN CAUSED LARGER THAN
EXPECTED ACCELERATIONS
O_N_,L PAOE IS
OF POOR QUALITY
A-24
A5. ACAP STANDARD PDRF FORM
PDRF FORM (VIDEO)
PDRF
ABCD-000
Opt:
USMP-1 MET:
PHONE ROOM AUTHOR
(205)544-8697 SOA-M
START/STOP DATA TIME: GMT/MET
VIDEO SOURCE:
PB AUD: ON or W/O)
USER COMMENTS:
NEEDED REQUEST
VIDEO
STOP:START:
NASA SELECT PB DIST: (MONITOPJGSE)
DUB: (W or W/O TIMING) TAPE TYPE: VHS 3/4"
s=SUBMIT/C=CANCEL-->
DFA ACTION
DFA NOTES:
PRIORITY- EXECUTE: START STOP
ACTIONEE MTV IMPLEMENTED CLOSEOUT
NOTES:
E=REVIEW J=STATUS K=CATEG L=MESSAGES M=STATISTICS N=READ Y=MORE Z=MENU


DADiSP processing guide

Abstract

Similar works

Full text

Available Versions

NASA Technical Reports Server