Effect of Mach number on over-all performance of single-stage axial-flow compressor designed for high pressure ratio

Abstract

A complete stage of an axial-flow compressor designed to produce a high pressure ratio was investigated at speeds from 110 to 130 percent of design speed (836 ft/sec). The data obtained and the results of a previous investigation of the same compressor at speeds from 50 to 100 percent of design speed were used to determine the effect of Mach number on over-all performance. The peak total-pressure ratio increased from 1.095 to 1.515 and the peak adiabatic efficiency decreased from 0.93 to 0.89 as the relative inlet Mach number increased from 0.34 to 0.77. At a relative inlet Mach number of 0.91, a total-pressure ratio of 1.635 was obtained at an adiabatic efficiency of 0.74