The optimum measurement processes are represented as the optimum detection operators in the quantum detection theory. The error probability by the optimum detection operators goes beyond the standard quantum limit automatically. However the optimum detection operators are given by pure mathematical descriptions. In order to realize a communication system overcoming the standard quantum limit, we try to give the physical meaning of the optimum detection operators

Hirota, Osamu

Kozuka, Haruhisa

Osaki, Masao

English

NASA Technical Reports Server

PHYSICAL MEANING OF THE OPTIMUM MEASUREMENT
PROCESS IN QUANTUM DETECTION THEORY
Masao Osaki, Haruhisa Kozuka, Osamu Hirota
Research Center for Quantum Communications,
Tamagawa University, Tokyo, JAPAN
Abstract
The optimum measurement processes are represented as the optimum detection operators
in the quantum detection theory. The error probability by the optimum detection operators
goes beyond the standard quantum limit automatically. However the optimum detection
operators are given by pure mathematical descriptions. In order to realize a communication
system overcoming the standard quantum limit, we try to give the physical meanings of the
optimum detection operators.
1 Introduction
The purpose of the quantum detection theory is to realize a communication system with its
performance overcoming the standard quantum limit (SQL). Standard quantum limit is often
referred as a detection limit achieved by classical detection theory, so that overcoming the SQL
is purely quantum mechanical effect. To go beyond the SQL, the quantum measurement process
must be generalized to the probability-operator measure (POM) [1, 2]. The optimization of
the P0M to minimize an error probability results in "the optimum detection operator"which
expresses not only a measurement process but also a decision process. However the optimum
detection operator works as a mapping from a signal quantum state to a decision result, so that
its physical meaning is not evident. In order to realize a communication system whose detection
performance is quantum mechanically optimum, investigations into the physical meanings of the
optimum detection operators are indispensable.
Recently we have derived some analytical solutions of the optimum detection operators and our
group gave the physical example overcoming the SQL by means of the quantum interference
[3, 4, 5]. In this paper we would like to interpret the physical meaning of the optimum detection
operators as the quantum interference.
2 Summary of Quantum Detection Theory
The significance of the quantum detection theory is the prediction of a receiver whose signal
detection performance is superior to the conventional ones optimized by the classical detection
theory. The bound between the quantum and classical detection theories is well-known as "the
standard quantum limit: SQL" which is rigorously defined as follows:J6]
313
https://ntrs.nasa.gov/search.jsp?R=19960025036 2020-06-16T04:06:13+00:00Z
Definition. 1
Standard quantum limit is defined as the minimum error probability achieved by the quantum
measurement based on the orthonormal spectrum measure of the signal observable.
Namely, the SQL can be obtained by quantum mechanical re-description of the conventional mea-
surement processes with the optimum decision rule. To go beyond this limit, signal measurement
processes must be generalized quantum mechanically. The generalized measurement process is
represented by the probability- operator measure (POM),//_, which is a non- negative Hermitian
operator satisfying the resolution of identity.
f/j = H_ > 0, (1)
M
?tj = i. (2)
j=l
Because of the resolution of identity, POM can include the meaning of a decision process and such
a POM is called "a detection operator." Therefore, the measurement of a signal quantum state,
_, by a detection operator,//j, gives a conditional probability, P(j[i), as follows:
P(jli) = Tr_,f/j. (3)
This probability represents the signal decision probability to be 'j' while the received signal is 'i'.
The error probability is also given by signal quantum states and detection operators.
M M
P_ = 1 - _ _,P(i[i) = 1- _-_Tr_,_,[I_, (4)
i=1 i=1
where _i is a prior-probability for i-th signal.
The quantum detection theory is the optimization theory for these detection operators to
minimize the above error probability. There are several formulae to find the optimum detection
operators. For example, necessary and sufficient condition for the optimum detection operators
based on the quantum minimax strategy is as follows [7]:
TF_,_, = T_fb_j, Vi,j, (5)
_fI_ [_IPi - _,P,] [I, = O,Vi,j, (6)
> o,vi, (7)
where/_ is called "the Lag'range operator" defined by
M M
(8)
i=1 i=1
A solution of the above formula goes beyond the SQL automatically. The practical derivation of
the optimum detection operators has been carried out for some signal sets consisting of linearly
independent quantum states [3]. In the derivation process, the following Lemma by Kennedy plays
an important role [1, 8].
314
Lemma
When the signal quantum states are linearly independent, the optimum POM for the error prob-
ability is indeed projection-valued.
Therefore in the cases of the quantum signal sets with pure states, the optimum detection operators
are orthogonal projectors on the signal space•
/*/3 = ]w_)(w_] and (wi[w_) = 6ii. (9)
where Iwi) is called "a measurement state." Since the measurement states are the orthonormal
bases in the signal space, signal quantum states, ]¢,) : (_, = ]¢,)(¢,I), can be represented by
measurement states.
M
I¢,)= E _j,l_j),
j=l
(10)
where xji is a parameter defined by
xj,------ (wjl¢i). (11)
Then it is possible to represent the relation between the signal quantum states and the measure-
ment states in the matrix form.
I¢1}
ICM}
Xll
XlM
• . . XMI
• •
• . . XMM
[o.,1)
i_M)
(12)
Inversely, the measurement states can be represented by signal quantum states.
1! = [zj,]-' : (13)
Hence the problems for the optimum detection operators, Eqs.(5-7), are turned into the algebraic
equations for parameters {xji}.
As an example, let us consider the Binary Phase Shift Keyed (BPSK) signal with coherent
states. The signal quantum states are given by [¢_) = [a), [¢2} = [ - a). The optimum detection
operators can be obtained as follows [3]:
f/l-- 1
f/2-- 1 {(1- _)[a)(a[ + (1 + l_--Z'_- _2) [ - a)(-a[
-_ (1_)(-_1+ I- _)(_1)}.
(14)
The measurements by these optimum detection operators show the error probability going far
beyond the SQL. These optimum detection operators look like the SchrSdinger Cat states [9]
consisting of the signal quantum states, [a) and I - a), so that the quantum interference may be
occurred there.
315
In general cases, the optimum detection operator can be also represented by a coherent super-
position state with signal quantum states from Eq.(13).
M M
[/j = Iwj)(wi] = _ _ tikt;tlCk)(¢t], (15)
k=l l=l
where t_i is an element of a matrix [t_i] representing the inverse matrix [xji] -1. The conditional
probability given in Eq. (3) becomes
P(jli) =
(16)
Here we can see the off-diagonal elements generated from the optimum detection operator. Then
there is a question "Can we regard this measurement process as a quantum interference by exis-
tence of these off-diagonal elements?" According to the general sense of the quantum interference
off- diagonal elements should be generated from a density operator representing a signal quantum
state. Hence in the following sections, we verify whether the optimum detection process can be
interpreted as a quantum interference.
3 Quantum Interference
To specify what is the quantum interference, we follow the conventional definition [10]
Definition.2
When the quantum probability is affected by the off-diagonal elements of a density operator
representation of some coherent superposition state, it is called the quantum interference.
In detail, a coherent superposition state is represented by
1¢>= k.l¢.), (17)
n
where k_ is a normalization constant. Then its density operator representation is as follows:
n
(18)
The quantum probability obtained by a certain measurement, dE(x), results in
p(x) = Tr_dE(x) = Tr _ _ k,.,k_l¢,_)(¢_,ldE(x ). (19)
When the off-diagonal elements remain in the quantum probability, it is called "a quantum inter-
ference," where the off-diagonal elements are given in the form
TrlCm)(¢,_ld/_(x) m _t n. (20)
316
Therefore the quantum interferencecanbe in sight by existenceof the off-diagonal elements
from a densityoperator. In the caseof the optimum detectionoperators,however,the off-diagonal
elementsaregeneratedfrom a measurementprocessas itself. If the notations of density operators
and the optimum detection operators can be exchange,then we can interpret that the physical
meaningof the optimum detection operator is the quantum interference.
4 Density Operators and the Optimum Detection Oper-
ators
The conditions for an operator to be the optimum detection operator are as follows [1]:
1. Non-negative Hermitian operator (condition to be POM).
//=//t > o. (21)
2. Projection on the signal space (after Kennedy's Lemma).
1"/2 =/'/, and Tr/'/= 1. (22)
On the other hand, the features of density operators are [11]
1. Non-negative Hermitian operator.
/5 = _Sf >_ O. (23)
2. Trace is equal to unit.
Tr/_ = 1. (24)
As a result, it is possible to exchange the notations of the optimum detection operators and density
operators.
{ P' _ //" (25)
Applying this operation to the conditional probability in Eq.(16),
P(jli) = Tr#,fIj
we can say that the above conditional probability contains the off- diagonal elements from the
density operator, _. Hence we can say that the optimum detection process generates the quantum
interference. In other words, when the error probability by the optimum detection goes beyond
the SQL automatically, the quantum interference is also used there automatically. The optimum
measurement state plays an equivalent role of the Schr6dinger Cat state as itself.
317
5 Conclusions
The physical interpretation of the optimum detection operator which represents the optimum
measurement process has been investigated. It is the quantum interference caused by the optimum
detection operator as itself. Because the optimum detection operator is represented by a coherent
superposition state consisting of signal quantum states. While this result is derived under the
restriction that signal quantum states are linearly independent, we assume that any optimum
detection operator generates the quantum interference as itself and uses it as much as possible to
reduce the error probability.
Acknowledgments
We would like to represent our acknowledgments to Dr. M. Ban (Advanced Research Lab.
tachi Ltd.).
Hi-
References
[1] C. W. Helstrom, Quantum Detection and Estimation Theory (Academic Press, NY, 1976).
[2] A. S. Holevo, J. of Mult. Anal. 3, 337 (1973).
[31 M. Osaki, and O. Hirota, Proc. of Quantum Communication and Measurement, 401, (Plenum
Publishing, NY, 1995).
[4] T. S. Usuda, and O. Hirota, Proc. of Quantum Communication and Measurement, 419,
(Plenum Publishing, NY, 1995).
[5] M. Sasaki, T. S. Usuda, and O. Hirota, Phys. Rev. A 51, 1702 (1995).
[6] O. Hirota, Annals of New York Academy of Science 755,863, (Plenum Publishing, NY, 1995).
[7] O. Hirota, and S. Ikehara, The Trans. of IECE Japan E65,627 (1982).
[8] R. S. Kenndy, M.I.T. Res. Lab. Electron. Quart. Progr. Rep. 110, 142 (1973).
[9] B. Yurke, and D. Stoler, Phys. Rev. Lett. 57, 13 (1986).
[10] K. Blum, Density Matrix Theory and Applications (Plenum Publishing, NY, 1981).
[11] W. H. Louisell, Quantum Statistical Properties of Radiation (John Wiley & Sons, NY, 1973).
318


Physical Meaning of the Optimum Measurement Process in Quantum Detection Theory

Abstract

Similar works

Full text

Available Versions

NASA Technical Reports Server