Hidalgo, Alberto

Marimon, Ramon

Río Fernandez, Joaquín del

Sarriá Gandul, David

UPCommons. Portal del coneixement obert de la UPC

REMOTE CONTROl ANd MONITORINg Of fIRE AlARM SySTEMSJoaquín del Río1, david Sarrià1, Alberto hidalgo1, Ramon Marimon21-SARTI Research group. Universitat Politècnica de Catalunya (UPC). www.cdsarti.org2-fire Vision Technology S.lAbstract- Most of the actual fire alarm systems used in small and medium size places in the market works as a standalone systems without the possibility of remote monitoring or configuration.This article shows a new development that provided for one hand, an Alarms and Events Reception System (AERS) that provide re-mote monitoring of fire alarm systems status based on a LabVIEW application and an additional hardware installed on the fire alarm system providing internet access.And on the other hand, the development of a web server embedded in the fire alarm systems providing system monitoring and configu-ration based on internet access. IntroductionNowadays, most of the fire alarm systems, figure 1, are installed in places where the system works standalone and are config-ured and managed locally. The possibility of remote manage-ment and monitoring using internet access open to fire systems manufactures different possibilities to extend the services given to final users.FIGURE 1. Fire Alarm SystemThe development of a new alarms and events reception system using LabVIEW allows centralizing the management of a group of fire alarm systems providing information about real incidents, faults, manipulations, archive, etc…On the other hand, the fire alarm systems equipped with the new hardware with an embedded web server are able to be pro-grammed and configured remotely thanks to a developed JAVA web page that provide direct communication with the fire alarm system. In that case, when the alarms and events reception sys-tem is receiving information from some fire alarm system, the operator is able to access the fire alarm system and monitor what is happening remotely in order to discard false alarms or provide confident information if a real problem is detected. System DescriptionThe aim of the project is provide internet access to commer-cial fire alarm systems in order to be managed remotely. The fire alarm systems are commercial off the shelf devices, and no firmware or hardware modifications are allowed. Then the ad-ditional software and hardware to be developed in the project has to take into account this restriction.In terms of hardware, the fire alarm systems taken into account has a TTL/RS232 comunication protocol that allow the local con-figuration. In order to provide remote access an RS232 to TCP/IP interface has been added to the actual hardware. This com-ponent was the XPORT Direct+ from Lantronix. Thanks to this component the system is able to be connected to an IP network (LAN). The network configuration can be done by a web con-nection or using a serial terminal. The defalut configuration has to take into account the host IP address where the Alarms and Events Reception System is hosted. This configuration has to be done in all fire alarm systems in order to provide information to the Alarms and Events Reception System.The Alarms and Events Reception System has been develoed us-ing LabVIEW 8.5, figure 3, and is able to manage different TCP/IP connections from different fire alarms systems at the same time. The applications had implemented the original fire alarms systems’ protocol. The application registers and monitors all the events in function of the fire alarms systems’ model.FIGURE 2. Simplified schemaInstrumentation Viewpoint / 10 / Winter32The most important features of the Alarms and Events Recep-tion System (AERS) are:1. Subscribe and unsubscribe fire alarm systems. 2. Email alert configuration3. Event definition for alarm or alert generation4. Multilanguage defined by the userThe AERS is generating an informative event that is sent periodi-cally by e-mail and is checking continuously the properly func-tion of the fire alarm system and its communications in order to detect hardware or communications failures.Market InnovationThis Project wants to supply the necessity of the small compa-nies to avoid the use of intrusion alarms in parallel with the fire alarm systems. In case the fire alarm system is able to be moni-tored remotely can be use as an intrusion detection system.Another key point of the project was the unique identification of the fire alarm system. Due to no hardware or firmware mod-ifications are possible in the fire alarm device, all of them are fully equal, and the communication protocol doesn’t take into account any identification command.For that reason, in addition to the XPORT device that provided TCP/IP communication a secondary small Renesas microcon-troller was installed between the XPORT and the primary fire alarm hardware.  This secondary microcontroller works totally transparent except for a known identification command. In or-der to indentify each device, the MAC address will be used as a unique address. The secondary microcontroller, each time the system starts, ask the XPORT device for his MAC address. When a identification command is received, the secondary microcon-troller answer with the MAC address, and this data doesn’t affect the normal behavior of the fire alarm device.The schema is shown in figure 4.Embedded JAVA Web ServerThe XPORT device is able to allocate a web server with a small memory space to deploy a web page. A JAVA application has been developed using applet technologies to provide a remote interface to the fire alarm device. One of the challenges was the reduce amount of memory available for the web page alloca-tion. The JAVA application works as a TCP/IP server, and implements the fire alarm protocol in order to interrogate and then visualize the state of the system via a web page. The web page is able to configure remotely the fire alarm configuration.ConclusionsThe development of a new Alarms and Events Reception System (AERS) using LabVIEW has been presented. The development time was reduced thanks to the high level API functionality in-tegrated in LabVIEW.  Thanks to the archive and log of alarms and events, system failures can be detected easily. The AERS design provides scal-ability in case more fire alarm models and their protocols has to be added. The additional hardware has being designed to be added to the fire alarm device, avoiding any firmware or hard-ware modification to the equipment. This capability enables the system with a plug&work functionality, avoiding manual or re-mote address configurations.Finally, the embedded web page inside the fire alarm system provide direct remote monitoring and configuration of the fire alarm system using any internet browser.FIGURE 3. LabVIEW Front Panel of the developed Alarms and Events Reception System (AERS)Figure 4. Schema of the additional hardware to pro-vide unique identification using the MAC address.Instrumental Viewpoint / 10 / Winter 33

Remote control and monitoring of fire alarm systems

Abstract

Similar works

Full text

Available Versions

UPCommons. Portal del coneixement obert de la UPC