A Study on Positional Accuracy Assessment of Scanned Cadastral Maps

Abstract

地籍圖是地政單位業務中的一項重要的基本資料,在國土資訊系統之九大資料庫中又以地籍圖之精度要求最高,然而舊圖因皺折破損嚴重,故數值化地籍圖之建置與供應,實為保存圖籍資料與推動國土資訊系統之首要工作。 本論文針對目前各界較常用之原圖掃瞄影像之地籍圖數化的作業過程,研究探討其可能之誤差來源,包含地籍圖定向之誤差、儀器之誤差、掃瞄圖籍影像向量化之誤差等,以誤差傳播原理推估地籍圖掃瞄數化之精度,並評估地籍圖本身皺折變形情形之影響。研究實驗成果可提供從事地籍數化之工作者及終端使用者一組量化的誤差分析數據,作為其後續運用時的細部考量、評估與決策的重要考慮因素。Cadastral maps play dominant roles in land administration as their accuracy requirement is the highest among the nine databases in the National Geographical Information Systems (NGIS). However, old cadastral maps usually get wrinkled and destroyed, the establishment and supply of digital cadastral date are the most primary work for preserving cadastral map data and implementing NGIS. This paper examines possible sources of error in the processes of digitizing cadastral maps , including errors caused by orientating cadastral maps, instruments, and vectorizing on the scanned images of cadastral maps, etc, in order to estimate the accuracy of digitizing on the scanned images of cadastral maps based on error propagation principles. Meanwhile, the influence of using wrinkled cadastral maps was also evaluated. Empirical results should provide quantified information about errors digitizing cadastral map workers and end-users for their application, evaluation and decision-making in using these data .第一章 緒論 1.1 前言1 1.2 研究動機與目的2 1.3 研究方法3 第二章 文獻回顧 2.1圖解地籍圖資料現況及數化作業執行-----4 2.1.1圖解地籍圖資料背4 2.1.2圖解地籍圖數化工作執行概6 2.2地籍圖數值化作業流程與數化步驟8 2.2.1地籍圖數值化作業流程8 2.2.2圖解地籍圖數化作業步驟11 2.3地籍圖數化方法之比較13 2.3.1 原圖直接數化法14 2.3.2原圖掃瞄影像數化法15 2.4圖解地籍圖數值化作業品質之檢核17 2.4.1地理資料庫的建置程序-----17 2.4.2資料品質的檢核----------18 2.4.3資料精度----------20 2.4.4錯誤資料的檢核------------20 2.4.5數值化品質的控制-------21 2.5 數化作業的資料處理作業------24 2.5.1數化作業的輸出入資料----24 2.5.2成果資料整合之處理------26 2.6 掃瞄儀原理與精度評-----29 2.6.1 掃瞄儀的基本原理-----29 2.6.2 掃瞄儀精度評估---29 第三章 掃瞄數化的理論分析 3.1坐標轉換的模31 3.1.1四參數轉換32 3.1.2六參數轉換34 3.2原圖掃瞄影像處理36 3.2.1影像追蹤向量化處理流程36 3.2.2圖籍的掃瞄與處理38 3.2.3影像二元化---39 3.2.4細線化40 3.2.5圖形向量化44 3.3 線段交點之計算46 3.3.1向量資料中之線段交點46 3.3.2網格資料中之線段交點48 第四章 實驗方法與結果分析 4.1實驗目的-----51 4.2 實驗方法與內容---51 4.2.1 研究範圍-51 4.2.2研究流程55 4.2.3 實驗方法55 4.2.3.1 圖籍定向誤差實驗------55 4.2.3.2地籍圖掃瞄流程---------58 4.3實驗結果與討論63 4.3.1地籍圖定向誤差63 4.3.2向量化誤差實驗66 4.3.3精度檢核分析----------76 4.3.4誤差來源分析76 第五章 結論與建議 5.1 結論77 5.2 建議78 參考文獻8

    Similar works