Karayannis, T.

Molland, A.F.

Sarac-Williams, Y.

Southampton (e-Prints Soton)

    Chairman of IMDC03  Prof. A. Papanikolaou, National Technical University of Athens, Dep. of Naval Architecture and Marine Engineering  Heroon Polytechniou 9, Zografou - 15773 Athens, GREECE Tel: +30 210-7721416/09, FAX: +30 210-7721408 e-mail: imdc2003@naval.ntua.gr, homepage: http://www.naval.ntua.gr/imdc2003     List of Finally Accepted Papers  a/a Paper Title Authors 1 A Research on Knowledge-Centered System for Ship Basic Design- Semantic Web Approach - Ando H., Yamato H., Sato M., Karasawa T.,  Tamura Y., Shirayama S. &  Masuda H. 2 Marine Design - Requirement Elucidation Rather Than Requirement Engineering Andrews D. 3 SURFCON – A 21st Century Ship Design Tool Andrews D. and Pawling R. 4 ROTIS: Remotely Operated Tanker Inspection System Andritsos F. & Maddalena D. 5 Development of Engineering Model for a Barge Mounted Seabed Sludge Treatment Plant Bae J.-H., Ha M.-K., Aho G.-H.,Park C.-H. & Kim S.-H. 6 The Possible Evolution of Weather Criterion for Ships With High Values of KG/T and B/T and its Impact on Design Bertaglia G., Francescutto A., Serra A. & Cafagna F. 7 Development of a Safety Based Design Tool for High Speed Craft Birmingham R., McGregor J. &  Astrugue J.-C. 8 Stability in Quartering Waves - a Critical Review of Today's Stability Code Blome T. & Krueger S. 9 Optimisation of Naval Ships with Genetic Algorithms for Enhanced Survivability Boulougouris E. & Papanikolaou A. 10 Application of a Rankine Source Method to the Evaluation of Motions of High Speed Marine Vehicles Bruzzone D. 11 Design of a 40 Knots RoRo Cargo Vessel for European Short Sea Shipping Chacon A.J.C., Zamorano T., Gonzalez  J.M. A-C. 12 The Modeling of Information Flow During Early Ship Design Stage of Ship Systems Chadzynski W. 13 Higher Order Restoring Forces for the Design of Multi-Leg Mooring Arrangements Chatjigeorgiou I.K. & Mavrakos S.A. 14 Multi-Objective Genetic Algorithms and Their Application in Ship Fleet Optimization Chen S., Wang L., Wu X. and Wang X. 15 Virtual Reality Applications in Shipbuilding: A Ship Docking Case Study Chryssolouris G., Alexopoulos K., Fragos D., Karabatsou V. & Stavropoulos P. 16 Strength Evaluation of a Container Carrier by Direct Load Calculation Chung Y.S., Jang Y.S., Yoon M.C., Kvalsvold J. &  Son C.W. 17 Ship Design Goals For Ship Impacts From The Civil Engineering Point of View Curbach M. & Proske D. 18 Stress Concentrations at the End Connections of Non-Symmetrical Stiffeners Del Moral F.J. & Chakkor M. R.     Chairman of IMDC03  Prof. A. Papanikolaou, National Technical University of Athens, Dep. of Naval Architecture and Marine Engineering  Heroon Polytechniou 9, Zografou - 15773 Athens, GREECE Tel: +30 210-7721416/09, FAX: +30 210-7721408 e-mail: imdc2003@naval.ntua.gr, homepage: http://www.naval.ntua.gr/imdc2003    19 Speed Doubling in the Mediterranean Sea: from the Idea to Financial Comparison Dubrovsky V. A. 20 The Risk Assessment for Safe Evacuation Based on the Escape Simulation Considering Smoke Diffusion in the Event of a Marine Fire Fukuchi N. & Shinoda T. 21 Initial Vessel Design by Evolutionary Optimization Gammon M.A. & Alkan A. 22 Electric Propulsion: from Infancy to Adolescence Gertsos S., Prousalidis J. & Frangopoulos C. 23 AVPRO-LBR.5, An Initial Design Software Suite with Scantling Optimization Capabilities Goubault P., Besnard N. & Rigo P. 24 Seakeeping Assessment for High-Speed Monohulls – A Comparative Study Grigoropoulos G.J., Harries S.,  Damala D.P., Birk L.& Heimann J. 25 Knowledge Mining for Condition Monitoring in the Design Stage Using First Principle Modelling Grimmelius H.T. 26 Optimization of Total Propulsive Efficiency in a Propeller-Stator Combination using an Evolutionary Algorithm Guner M. & Gammon M.A. 27 Development of Expert System for Designing Safe Ship Power Plants Hempel L. & Tarelko W. 28 Study on Human Performance Reliability of Ship Power Control System Hong Yi, Qunxiao Z., Guangdong W.& Yufang Z. 29 Feasibility of Offshore Waste / Sewage Disposal System "ECO-PLATFORM" - Technology Integration for the Marine Design of the 21st Century Hosoda R., Murota S. & Nakatani S. 30 Rogue Waves, a Reality at Sea, a Nightmare for Naval Architects Huther M.& Olagnon M. 31 Time Domain Simulations of a Moored Multi-Body Floating System Inoue Y. & Ali M.T. 32 Probabilistic Evaluation of Hull Structure Renewals for Aging Ships Ivanov L.D., Spencer J.S. & Wang G. 33 Design and Production Issues Concerning Bonded Joints for Segmented FRP Composite Hulls Jeong H.K., Shenoi R.A. & Dulieu-Barton J.M. 34 An AutoCAD®-based Integrated Software for Transforming Hardcopy Ship-line Drawings to 3D CAD Models Kaklis P.D., Kostas K., Politis C.G.  & Voutsinas V. 35 Hydrodynamic Aspects on Large LNG Carrier Design Kong D.S., Kang S.W, Ahn S.M., Paik K.J., Kim Y.S.. 36 A General Framework of New Subdivision Regulations Karaszewski Z. & Pawlowski M. 37 Development of a New Mouldless FRP Production System Applicable to a Fishing Boat of High Performance Kim H., Lee S.-H. & Lew J.-M. 38 A Study on the Anti-Vibration Design for a Large Container Carrier Kim H.-W, Park J.-H. & Bae J.-G.     Chairman of IMDC03  Prof. A. Papanikolaou, National Technical University of Athens, Dep. of Naval Architecture and Marine Engineering  Heroon Polytechniou 9, Zografou - 15773 Athens, GREECE Tel: +30 210-7721416/09, FAX: +30 210-7721408 e-mail: imdc2003@naval.ntua.gr, homepage: http://www.naval.ntua.gr/imdc2003    39 Development of Structural Analysis Software for Ships Kim J.H., Lee J.Y., Son & Yum C.W. 40 Optimal Torch Path Planning Considering Minimum Heat Effect Kim Y., Gotoh K., Toyosada M. & Park J. 41 Reverse Engineering of Ship Hulls Based on Photogrammetric Measurements and Vague Discrete Interval Modeling Koelman H.J., Horvath I. & Rusak Z. 42 A VR-Environment for Investigating Passengers’ Locomotion Under Dynamic Ship Motion Conditions Kostas K.V., Ginnis A.I., Kaklis P.D.  & Papanikolaou A.D. 43 A Management System Based Approach To Ship Design Kuo C. 44 Manoeuvring with Pods: Model Tests and Sea Trials Experience of the M/S Costa Atlantica Kurimo R. & Bystrom L. 45 A Set-Based Ship Design Synthesis System Lamb T. & Kotinis M. 46 Design Considerations for Oil Fences Lee C.M. & Kang K.H. 47 STEP-based Product Model for Ship Initial Design Lee J.K., Lee S.S., Park B.J. & Lee J.H. 48 An Innovative Compartment Modeling and Ship Calculation System Lee K.Y., Lee S.U., Cho D.Y., Roh M.I., Kang S.C. & Seo J.W. 49 Innovative Technology: RoRo Vessel, Terminal, and Barge Design that will Improve the Cost Position and Lead-time for the Logistic Chain Lindstad H.& Uthaug E. 50 IAHP Method Applied in Optimizing Ship Types Long Y. & Jiahua T. 51 Propulsion Oprimization Diagrams for Fishing Vessels Loukakis T. A., Grigoropoulos G. J. & Peppa S. K. 52 Ship Collision Damages Luetzen M. 53 Towards Optimal Design of Ship Hull Shapes Maisonneuve J.J., Harries S., Raven H.C., Marzi J., Henkel S. & Viviani U. 54 Effects of the Harmonised Probabilistic Damage Stability Standard on a Ro-Ro Passenger Ship Design Mikkonen I. 55 Study on the Fuel-Economic Hull Form Design Method for Fine Higher-Speed Ships Min K.S., Lee Y.S., Kang S.H. & Han B.W. 56 Reliability Based Ultimate Strength Structural Design for Safety Moatsos I. & Das P.K. 57 Preliminary Estimates of the Dimensions, Powering and Seakeeping Characteristics of Fast Ferries Molland A.F., Karayannis T., Taunton D.A. and Saraη-Williams Y. 58 Full Stochastic Fatigue Analysis for Kizomba FPSO Design Moon J.S., Shin H.S., Sim W.S., Lee J.H. & Na J.H.     Chairman of IMDC03  Prof. A. Papanikolaou, National Technical University of Athens, Dep. of Naval Architecture and Marine Engineering  Heroon Polytechniou 9, Zografou - 15773 Athens, GREECE Tel: +30 210-7721416/09, FAX: +30 210-7721408 e-mail: imdc2003@naval.ntua.gr, homepage: http://www.naval.ntua.gr/imdc2003    59 New Long-term Prediction Method Considering Critical Standard Deviation Naito S.& Minoura M. 60 Design For Safety:  The Philosophy and Methodology Integrated in the Design of Ro-Ro Passenger Ships Oestvik I. & Tellkamp J. 61 Development of a New Concept on a Fast Ship Form Ogiwara S. & Maruo H. 62 Internal Hull Subdivision Optimisation of Ro-Ro Vessels in Multiple Criteria Decision Making Environment Olcer A.I., Tuzcu C. & Turan O. 63 Combining Ship Machinery System Design and First Principle Safety Analysis Papadopoulos Y. & Petersen U. 64 Development of Intelligent Evacuation Model for Ships and Marine Structures Park J.H., Kong S.C., Lee D., Kim H. & Yang Y.S. 65 Application of Virtual Reality to Cruise Ship Design Peverero M. & Zini A. 66 A Systematic Study on the Effect of Main Design Parameters and Internal Layout on Damage Stability Characteristics of RoRo Vessels Politis C. & F. del Castillo 67 Estimation of Attained Index and Optimisation of the Subdivision In RoRo Vessels Ravn E.S. 68 A New Prediction Method For Assessing The Stopping Ability At Design Stage Rhee K.P., Sung Y.J., Yeo D.J. & Lee J.M. 69 How to Minimise Production Costs at the Preliminary Design Stage – Scantling Optimization Rigo P. 70 Project HARDER - Damage Stability Standards for the Future Rusaas S. 71 A Strategy for Modelling the Design Development Phase of a Ship Scott J., Tolan C. & Sen P. 72 A Conceptual Design and Feasibility Study of the Floating Container Terminal with High Performance Shinoda T. & Fukuchi N. 73 Multi-Criteria Oprimization Model of Deck Layout Design Slapnicar V.& Grubisic I. 74 Fire Propagation and Damage Control Simulation Smit C.S. 75 An Adaptive Computer Based Design Tool for FPSO’s Sommersel T. 76 DelftBASE, an Estimation and Designtool for the Pre-Contract Phase in Ship Design Ter Haar R., Guyt A. & Boonstra H. 77 Structural Design of Deep Water Composite Pressure Housings - Material Selection and Modeling Guidelines Tsouvalis N., Chauchot P., Livingstone F., Papazoglou V., Antonelli V. & Williams J. 78 Numerical and Experimental Investigation of 2D Sloshing in Rectangular Tanks Tzabiras G., Kiosse E. & Stratis C.     Chairman of IMDC03  Prof. A. Papanikolaou, National Technical University of Athens, Dep. of Naval Architecture and Marine Engineering  Heroon Polytechniou 9, Zografou - 15773 Athens, GREECE Tel: +30 210-7721416/09, FAX: +30 210-7721408 e-mail: imdc2003@naval.ntua.gr, homepage: http://www.naval.ntua.gr/imdc2003    79 TNO-PML Developments of Blast Resistant Doors and Walls Van Erkel A.G. & Galle L.F. 80 A Risk-Based Framework on Ship Design For Safety Vassalos D., Konovessis D. & Vassalos G. C. 81 The Application of Advanced Numerical Tools in Design for Stockholm Agreement Upgrading Vassalos D., Tuzcu C., Turan O., Bole M., York A. & Letizia L. 82 Structural Aspects of a New High Speed Pentamaran Design Viejo de Francisco F., Perez de Lucas A. & Gonzalez Tejero S 83 On the Effect of Bottom Profile Form of a Transom Stern on its Stern Wave Resistance Yamano T., Kusunoki Y., Kuratani F., Ogawa T. & Funeno I. 84 Structural Optimisation Method for the Concept Design of Ship Structures Zanic V., Andric J. & Frank D. 85 An Integrated Optimisation Procedure for the Design of Ro-Ro Passenger Ships of Enhanced Safety and Efficiency Zaraphonitis G., Boulougouris E. & Papanikolaou A. 86 Hull Form Optimization of High Speed Vessels With Respect to Wash and Powering Zaraphonitis G., Papanikolaou A. & Mourkoyannis D. 87 New Practical Design Loads for Direct Strength Calculation of  Primary Structural Members of Bulk Carriers Zhu T.& Shigemi T. 88 Systematic Incident/Accident Analysis for Safety Assessment and Reliability Studies, applied to Large Passenger Vessels Zijlman P., Boonstra H. & Akerboom R. 89 Development of a Whole Ship System Simulation to Support the Design of New Generation Ships Zini A., Lommi A., Necrisi R., Tozzi D., Raffa M. & Costa R.     

Preliminary estimates of the dimensions, powering and seakeeping characteristics of fast ferries

Abstract

Similar works

Full text

Available Versions

Southampton (e-Prints Soton)