We describe a method for determining the maximum absorption enhancement in thin film waveguides based on optical dispersion relations. For thin film structures that support one, well-confined guided mode, we find that the absorption enhancement can surpass the traditional limit of 4n^2 when the propagation constant is large and/or the modal group velocity is small compared to the bulk value. We use this relationship as a guide to predicting structures that can exceed the 4n^2 light trapping limit, such as plasmonic and slot waveguides. Finally, we calculate the overall absorption for both single and multimode waveguides, and show examples of absorption enhancements in excess of 4n^2 for both cases

Atwater, Harry A.

Callahan, Dennis M.

Munday, Jeremy N.

English

Caltech Authors - Main

Light trapping beyond the 4n2 limit in thin waveguides
Jeremy N. Munday, Dennis M. Callahan, and Harry A. Atwater 
 
Citation: Appl. Phys. Lett. 100, 121121 (2012); doi: 10.1063/1.3695156 
View online: http://dx.doi.org/10.1063/1.3695156 
View Table of Contents: http://apl.aip.org/resource/1/APPLAB/v100/i12 
Published by the American Institute of Physics. 
 
Related Articles
Double embedded photonic crystals for extraction of guided light in light-emitting diodes 
Appl. Phys. Lett. 100, 171105 (2012) 
Nonreciprocal optical Bloch-Zener oscillations in ternary parity-time-symmetric waveguide lattices 
Appl. Phys. Lett. 100, 151913 (2012) 
Analysis of dielectric loaded surface plasmon waveguide structures: Transfer matrix method for plasmonic
devices 
J. Appl. Phys. 111, 073108 (2012) 
Coupling of energy from quantum emitters to the plasmonic mode of V groove waveguides: A numerical study 
J. Appl. Phys. 111, 064323 (2012) 
Temporal dynamics of all-optical switching in quadratic nonlinear directional couplers 
Appl. Phys. Lett. 100, 111117 (2012) 
 
Additional information on Appl. Phys. Lett.
Journal Homepage: http://apl.aip.org/ 
Journal Information: http://apl.aip.org/about/about_the_journal 
Top downloads: http://apl.aip.org/features/most_downloaded 
Information for Authors: http://apl.aip.org/authors 
Downloaded 27 Apr 2012 to 131.215.220.186. Redistribution subject to AIP license or copyright; see http://apl.aip.org/about/rights_and_permissions
Light trapping beyond the 4n2 limit in thin waveguides
Jeremy N. Munday,1,2,a) Dennis M. Callahan,2 and Harry A. Atwater2
1Department of Electrical and Computer Engineering and the Institute for Research in Electronics
and Applied Physics, University of Maryland, College Park, Maryland 20742, USA
2Thomas J. Watson Laboratories of Applied Physics, California Institute of Technology, Pasadena,
California 91125, USA
(Received 6 January 2012; accepted 29 February 2012; published online 23 March 2012)
We describe a method for determining the maximum absorption enhancement in thin film
waveguides based on optical dispersion relations. For thin film structures that support one,
well-confined guided mode, we find that the absorption enhancement can surpass the traditional
limit of 4n2 when the propagation constant is large and/or the modal group velocity is small
compared to the bulk value. We use this relationship as a guide to predicting structures that can
exceed the 4n2 light trapping limit, such as plasmonic and slot waveguides. Finally, we calculate
the overall absorption for both single and multimode waveguides, and show examples of
absorption enhancements in excess of 4n2 for both cases. VC 2012 American Institute of Physics.
[http://dx.doi.org/10.1063/1.3695156]
The confinement of light in thin waveguides is of great
importance for the development of thin film photovoltaics.
When the thickness of the film is less than the absorption
depth of the material, not all of the incident light can be
absorbed on a single or double pass through the absorber.
However, a thin film is sometimes necessary to allow for ef-
ficient collection of carriers or to improve the cell’s perform-
ance based on reducing the cell’s recombination current.1
For weakly absorbing materials whose thickness h is signifi-
cantly larger than the wavelength of the incident light k, the
path length enhancement is given by 4n2, where n is the
index of refraction of the absorber.2,3 An extension of this
method, which is based on a statistical distribution of the
electromagnetic energy density, to the case where h k, was
performed by Stuart and Hall.4 By considering the reduction
in the number of photonic modes in an absorbing slab as the
slab’s thickness is reduced, they concluded that the maxi-
mum absorption enhancement is reduced below 4n2.
Despite the early work suggesting that the absorption
enhancement in thin slabs is less than 4n2, recent work has
shown that the enhancement may in fact exceed this limit
through the use of photonic crystals,5 plasmonic wave-
guides,6 and high index claddings,7,8 which all elevate the
local density of optical states to achieve enhancment.9 Here
we revisit the case of a thin waveguide and determine that
the 4n2 limit can be exceeded for a number of structures that
support large propagation constants and/or slow modal group
velocities.
We follow a formalism similar to Refs. 4 and 6 and
begin by considering the thermal occupation of electromag-
netic modes in a waveguide surrounded by vacuum. The
total density of modes per unit volume and frequency is
given by,4
qtot ¼ qrad þ
X
m
qm (1)
where
qrad ¼

1
ﬃﬃﬃﬃﬃﬃﬃﬃﬃﬃﬃﬃﬃﬃﬃﬃﬃﬃﬃ
1 1=n2sc
q  x2n3sc
p2c3
 
: (2)
is the density of radiation modes not trapped by total internal
reflection within a material of index nsc, and
qm ¼
bm
2phvmg
(3)
is the density of waveguide modes with modal propagation
constants bm and group velocities vmg for the mth mode.
Assuming that the modes of the structure are equally occu-
pied from an appropriate incoupler, the total fraction of inci-
dent light absorbed by the film is6
Ftot ¼ qradqtot
frad þ
X
m
qm
qtot
fm; (4)
where
frad ¼ a
,
aþ 4 qtotv
rad
g
q0v0g
 !
h
" #10@
1
A (5)
and
fm ¼ aCm
,
aCm þ 4
qtotv
rad
g
q0v0g
 !
h
" #10@
1
A: (6)
a is the attenuation coefficient, Cm is modal confinement fac-
tor, q0¼x2/(p2c3) is the bulk density of states in vacuum,
and v0g¼ c is the speed of light in the surrounding vacuum.
In Eq. (4), note that the ratios of the density of states gives
the fraction of light that enters each mode and frad and fm
give the rate of absorption divided by the total rate of energy
loss (absorption and out coupling).
a)Author to whom correspondence should be addressed. Electronic mail:
jnmunday@umd.edu.
0003-6951/2012/100(12)/121121/4/$30.00 VC 2012 American Institute of Physics100, 121121-1
APPLIED PHYSICS LETTERS 100, 121121 (2012)
Downloaded 27 Apr 2012 to 131.215.220.186. Redistribution subject to AIP license or copyright; see http://apl.aip.org/about/rights_and_permissions
We now consider the case of a thin waveguide that only
supports one guided mode. For this case qrad  qm, and the
total fraction of light absorbed can be approximated by
F1mode ¼ aCm
,
aCm þ 4
qmv
rad
g
q0v0g
 !
h
" #10@
1
A
¼ aCm
,
aCm þ 4 bmpc
3
2x2hvmg nsc
 !
h
" #10@
1
A; (7)
which can be compared to the fraction of light absorbed in
the traditional 4n2 limit,10
F4n2 ¼ a
.
aþ ½4n2sch1
 
: (8)
In order to exceed the 4n2 limit, F1-mode must be greater than
F4n2 . With the condition F1mode > F4n2 , we obtain our cen-
tral result,
bm
k0
 
vradg
vmg
 !
Cm > 4nsc
h
k
 
: (9)
Thus in order to surpass the 4n2 limit, we want well-confined
modes (Cm 1) that have large propagation constants
(bm> k0), small group velocities (vmg < v
rad
g ), and waveguide
thicknesses that are small compared to the wavelength of the
incident light. By comparing Eqs. (7) and (8), we note that
the path length enhancement lpath is
lpath ¼ c
vmg
 !
bm
k0
 
k
h
 
Cm: (10)
The actual path length is lpath h for the single mode wave-
guide case compared to 4n2h for the traditional limit.
For a given waveguide structure, the dispersion relation is
calculated to determine the modal parameters needed for Eq.
(9). Figure 1 shows the dispersion relation for several struc-
tures based on a thin film of P3HT:PCBM, a common poly-
mer solar cell blend.11 The propagation constants are obtained
from the x-axis, and the slopes of the curves are proportional
to the group velocities. Traditional photonic modes for the
slab are confined to the region between the vacuum light line
and the absorber light line (light blue region). In this region,
bm< k0, vmg > v
rad
g , and Cm  1 when the waveguide is thin.
Thus, these photonic slab modes cannot surpass the 4n2 limit,
which is the conclusion reached by Stuart and Hall as they
considered only modes in this region.4
Figure 1 also shows the dispersion relation for three
structures that have large bm, slow vmg , and large confinement
factors. These structures include a surface plasmon polariton
waveguide, a high-low-high index dielectric slot waveguide,
and a metal-insulator-metal (MIM) waveguide. These disper-
sion curves represent the lowest order TM modes for the
structures; however, higher order modes may exist depend-
ing on the thickness of the slab. While Eq. (9) is strictly valid
only for a single, highly confined mode, the behavior of the
FIG. 1. (Color online) Waveguide dispersion relations. Plasmonic (solid
red), metal-insulator-metal (dashed red), and high-low-high index dielectric
slot (dashed green) waveguides have dispersion relations that lie to the right
of the bulk absorber light line (solid blue), which have large propagation
constants, slow group velocities, and are well-confined.
FIG. 2. (Color online) Surface plasmon polariton waveguides that beat the
4n2 limit. (a) Calculated absorption enhancement (for k¼ 580 nm) surpasses
the 4n2 limit for a large range of thicknesses. The shaded region corresponds
to the region where the limit is surpassed if only one mode were present.
The appearance of a second mode (vertical dashed line) allows the absorp-
tion to surpass the 4n2 limit beyond the region predicted by the single mode
model. (b) Plasmonic waveguide absorption surpasses the 4n2 limit through-
out the useful absorbing spectrum of the polymer. Inset: Schematic of the
plasmonic waveguide and the modal profile.
121121-2 Munday, Callahan, and Atwater Appl. Phys. Lett. 100, 121121 (2012)
Downloaded 27 Apr 2012 to 131.215.220.186. Redistribution subject to AIP license or copyright; see http://apl.aip.org/about/rights_and_permissions
fundamental mode is often a good indicator of the overall
absorption characteristics, as we shall see below.
A thin surface plasmon polariton waveguide (Fig. 2) sat-
isfies the necessary conditions to surpass the 4n2 limit for a
variety of wavelengths and slab thicknesses. Using Eq. (9),
we find that the path length enhancement should exceed 4n2
for absorber thicknesses between 50–105 nm (shaded
region). However, the condition of only one well-confined
mode in the structure is not met for thicknesses larger than
70 nm, because a second mode exists for larger slab thick-
nesses. Further, below 50 nm, the confinement factor is
reduced. Figure 2(a) shows the actual absorption enhance-
ment beyond 4n2 (circles) for k¼ 580 nm using Eq. (4),
which takes into account both propagating and radiation
modes. This structure surpasses the 4n2 limit for the entire
range. The wavelength resolved absorption for a 50 nm thick
slab of P3HT:PCBM on Ag is shown in Fig. 2(b).
A high-low-high index dielectric slot waveguide is also
found to exceed the 4n2 limit. This structure consists of a
10 nm P3HT:PCBM layer cladded on both sides by a 45 nm
layer of GaP, a wide bandgap semiconductor with an indirect
energy gap whose absorption is negligible over the wave-
length region of consideration and whose real part of the re-
fractive index exceeds that of P3HT:PCBM. This structure
supports multiple modes; however, we can use our expres-
sion for the path length enhancement to predict whether or
not the structure could surpass the 4n2 limit if only one mode
were present. Figure 3(a) shows that the lowest order TE and
TM modes for k¼ 580 nm would both have path length
enhancements in excess of 4n2 if this were a single mode
waveguide.
Figure 3(b) shows the total absorption in the slot wave-
guide and the fraction of absorption coming from each of the
modes. For wavelengths below 620 nm, there are three prop-
agating modes; however, for longer wavelengths, there are
only two modes because the second order TE mode is cut
off. Because the cladding layer is thin, the radiation modes
were assumed to be incident from vacuum and resulted
in< 1% of the total absorption. If the radiation modes were
allowed to occupy the full 4p steradians, qrad would still con-
tribute to less than 3% of the total absorption. Thus the main
contribution to the absorption comes from the propagating
waveguide modes. We note that the absorption in this high-
low-high index dielectric slot waveguide is in excellent
agreement with the calculated absorption using the local den-
sity of optical states, as recently shown in Ref. 9. A key new
feature of using the dispersion relations is that we can now
determine the individual contributions of each waveguide
mode. We find that both the fundamental TE and TM modes
give nearly equal contributions to the enhancement for this
structure.
Finally, we explore a hybrid waveguide that combines
the benefits of both a high index cladding and a plasmonic
back reflector to achieve over 90% absorption in a 10 nm
P3HT:PCBM layer—well in excess of the 4n2 limit for
P3HT:PCBM. The high index GaP cladding further confines
the mode and reduces its group velocity. Figure 4 shows the
total waveguide absorption, the absorption expected for 4n2
passes, and the absorption obtained by a 10 nm thick
FIG. 3. (Color online) Dielectric slot waveguide that beats the 4n2 limit. (a)
Path length enhancement if only one mode were present. Both the lowest
TM and TE modes surpass 4n2. Insets: Mode profiles. (b) Modal decomposi-
tion of the absorbed fraction of the incident light. The total absorption sur-
passes the 4n2 limit. Inset: Schematic of the high-low-high index dielectric
slot waveguide.
FIG. 4. (Color online) Absorption for a plasmonic waveguide cladded with
a high index (GaP) top layer. Waveguide absorption (circles) is well in
excess of the 4n2 limit (solid line) and the calculated absorption limit for a
planar slab in vacuum (dashed line).
121121-3 Munday, Callahan, and Atwater Appl. Phys. Lett. 100, 121121 (2012)
Downloaded 27 Apr 2012 to 131.215.220.186. Redistribution subject to AIP license or copyright; see http://apl.aip.org/about/rights_and_permissions
P3HT:PCBM film surrounded by vacuum. Note that the
10 nm thick P3HT:PCBM film in vacuum has a significantly
lower absorption than would be expected by the 4n2 limit.
This is due to the fact that the photonic modes are not well
confined, have higher group velocities than do modes in the
bulk, and have small propagation constants, which are in
agreement with the conclusions of Ref. 4.
In summary, we have described a general method for
predicting whether or not thin waveguides can have absorp-
tion enhancements in excess of the 4n2 limit based on their
dispersion relations. We gave several examples of such
structures by including plasmonic back reflectors and/or high
index claddings in order to manipulate the modal propaga-
tion constant, group velocity, and confinement factor. Our
results are in agreement with recent studies that calculate the
local density of optical states9; however, the method pre-
sented here allows us to resolve the contributions of the indi-
vidual waveguide modes, which can be enhanced further
through appropriate waveguide dispersion engineering.
Thus, our results provide both a qualitative and quantitative
design scheme for improving the light trapping in thin films,
which is highly desired for solar cell applications.
The authors acknowledge helpful discussions with
E. Schiff, P. Saeta, M. Leite, S. Burgos, E. Feigenbaum,
E. Kosten, J. Fakonas, D. O’ Carroll, J. Grandidier, V. E.
Ferry, and K. Aydin. This work was supported by the Energy
Frontier Research Center program of the Office of Science
of the Department of Energy under Grant DESC0001293
(J.N.M.) and by Department of Energy under Grant DOE
DE-FG02-07ER46405 (D.M.C.).
1J. N. Munday, D. M. Callahan, C. Chen, and H. A. Atwater, 37th IEEE
Photovoltaic Specialists Conference (PVSC), Seattle, WA (June 2011).
2E. Yablonovitch and G. D. Cody, IEEE Trans. Electron. Devices 29(2),
300 (1982).
3E. Yablonovitch, J. Opt. Soc. Am. 72(7), 899 (1982).
4H. R. Stuart and D. G. Hall, J. Opt. Soc. Am. A 14(11), 3001 (1997).
5D. Zhou and R. Biswas, J. Appl. Phys. 103(9), 093102 (2008).
6E. A. Schiff, J. Appl. Phys. 110(10), 104501 (2011).
7Z. Yu, A. Raman, and S. Fan, Proc. Natl. Acad. Sci. 107 (41), 17491
(2010).
8Martin A. Green, Prog. Photovoltaics 19, 473(2011).
9D. M. Callahan, J. N. Munday, and H. A. Atwater, Nano Lett. 12, 214
(2012).
10T. Tiedje, E. Yablonovitch, G. D. Cody, and B. G. Brooks, IEEE Trans.
Electron Devices 31(5), 711 (1984).
11M. T. Dang, L. Hirsch, and G. Wantz, Adv. Mater. 23(31), 3597 (2011).
121121-4 Munday, Callahan, and Atwater Appl. Phys. Lett. 100, 121121 (2012)
Downloaded 27 Apr 2012 to 131.215.220.186. Redistribution subject to AIP license or copyright; see http://apl.aip.org/about/rights_and_permissions


Light trapping beyond the 4n^2 limit in thin waveguides

Light trapping beyond the 4n2 limit in thin waveguides
Jeremy N. Munday, Dennis M. Callahan, and Harry A. Atwater 
 
Citation: Appl. Phys. Lett. 100, 121121 (2012); doi: 10.1063/1.3695156 
View online: http://dx.doi.org/10.1063/1.3695156 
View Table of Contents: http://apl.aip.org/resource/1/APPLAB/v100/i12 
Published by the American Institute of Physics. 
 
Related Articles
Double embedded photonic crystals for extraction of guided light in light-emitting diodes 
Appl. Phys. Lett. 100, 171105 (2012) 
Nonreciprocal optical Bloch-Zener oscillations in ternary parity-time-symmetric waveguide lattices 
Appl. Phys. Lett. 100, 151913 (2012) 
Analysis of dielectric loaded surface plasmon waveguide structures: Transfer matrix method for plasmonic
devices 
J. Appl. Phys. 111, 073108 (2012) 
Coupling of energy from quantum emitters to the plasmonic mode of V groove waveguides: A numerical study 
J. Appl. Phys. 111, 064323 (2012) 
Temporal dynamics of all-optical switching in quadratic nonlinear directional couplers 
Appl. Phys. Lett. 100, 111117 (2012) 
 
Additional information on Appl. Phys. Lett.
Journal Homepage: http://apl.aip.org/ 
Journal Information: http://apl.aip.org/about/about_the_journal 
Top downloads: http://apl.aip.org/features/most_downloaded 
Information for Authors: http://apl.aip.org/authors 
Downloaded 27 Apr 2012 to 131.215.220.186. Redistribution subject to AIP license or copyright; see http://apl.aip.org/about/rights_and_permissions
Light trapping beyond the 4n2 limit in thin waveguides
Jeremy N. Munday,1,2,a) Dennis M. Callahan,2 and Harry A. Atwater2
1Department of Electrical and Computer Engineering and the Institute for Research in Electronics
and Applied Physics, University of Maryland, College Park, Maryland 20742, USA
2Thomas J. Watson Laboratories of Applied Physics, California Institute of Technology, Pasadena,
California 91125, USA
(Received 6 January 2012; accepted 29 February 2012; published online 23 March 2012)
We describe a method for determining the maximum absorption enhancement in thin film
waveguides based on optical dispersion relations. For thin film structures that support one,
well-confined guided mode, we find that the absorption enhancement can surpass the traditional
limit of 4n2 when the propagation constant is large and/or the modal group velocity is small
compared to the bulk value. We use this relationship as a guide to predicting structures that can
exceed the 4n2 light trapping limit, such as plasmonic and slot waveguides. Finally, we calculate
the overall absorption for both single and multimode waveguides, and show examples of
absorption enhancements in excess of 4n2 for both cases. VC 2012 American Institute of Physics.
[http://dx.doi.org/10.1063/1.3695156]
The confinement of light in thin waveguides is of great
importance for the development of thin film photovoltaics.
When the thickness of the film is less than the absorption
depth of the material, not all of the incident light can be
absorbed on a single or double pass through the absorber.
However, a thin film is sometimes necessary to allow for ef-
ficient collection of carriers or to improve the cell’s perform-
ance based on reducing the cell’s recombination current.1
For weakly absorbing materials whose thickness h is signifi-
cantly larger than the wavelength of the incident light k, the
path length enhancement is given by 4n2, where n is the
index of refraction of the absorber.2,3 An extension of this
method, which is based on a statistical distribution of the
electromagnetic energy density, to the case where h k, was
performed by Stuart and Hall.4 By considering the reduction
in the number of photonic modes in an absorbing slab as the
slab’s thickness is reduced, they concluded that the maxi-
mum absorption enhancement is reduced below 4n2.
Despite the early work suggesting that the absorption
enhancement in thin slabs is less than 4n2, recent work has
shown that the enhancement may in fact exceed this limit
through the use of photonic crystals,5 plasmonic wave-
guides,6 and high index claddings,7,8 which all elevate the
local density of optical states to achieve enhancment.9 Here
we revisit the case of a thin waveguide and determine that
the 4n2 limit can be exceeded for a number of structures that
support large propagation constants and/or slow modal group
velocities.
We follow a formalism similar to Refs. 4 and 6 and
begin by considering the thermal occupation of electromag-
netic modes in a waveguide surrounded by vacuum. The
total density of modes per unit volume and frequency is
given by,4
qtot ¼ qrad þ
X
m
qm (1)
where
qrad ¼

1
ffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffi
1 1=n2sc
q  x2n3sc
p2c3
 
: (2)
is the density of radiation modes not trapped by total internal
reflection within a material of index nsc, and
qm ¼
bm
2phvmg
(3)
is the density of waveguide modes with modal propagation
constants bm and group velocities vmg for the mth mode.
Assuming that the modes of the structure are equally occu-
pied from an appropriate incoupler, the total fraction of inci-
dent light absorbed by the film is6
Ftot ¼
qrad
qtot
frad þ
X
m
qm
qtot
fm; (4)
where
frad ¼ a
,
aþ 4
qtotv
rad
g
q0v0g
 !
h
" #10@
1
A (5)
and
fm ¼ aCm
,
aCm þ 4
qtotv
rad
g
q0v0g
 !
h
" #10@
1
A: (6)
a is the attenuation coefficient, Cm is modal confinement fac-
tor, q0¼x2/(p2c3) is the bulk density of states in vacuum,
and v0g¼ c is the speed of light in the surrounding vacuum.
In Eq. (4), note that the ratios of the density of states gives
the fraction of light that enters each mode and frad and fm
give the rate of absorption divided by the total rate of energy
loss (absorption and out coupling).
a)Author to whom correspondence should be addressed. Electronic mail:
jnmunday@umd.edu.
0003-6951/2012/100(12)/121121/4/$30.00 VC 2012 American Institute of Physics100, 121121-1
APPLIED PHYSICS LETTERS 100, 121121 (2012)
Downloaded 27 Apr 2012 to 131.215.220.186. Redistribution subject to AIP license or copyright; see http://apl.aip.org/about/rights_and_permissions
We now consider the case of a thin waveguide that only
supports one guided mode. For this case qrad  qm, and the
total fraction of light absorbed can be approximated by
F1mode ¼ aCm
,
aCm þ 4
qmv
rad
g
q0v0g
 !
h
" #10@
1
A
¼ aCm
,
aCm þ 4
bmpc
3
2x2hvmg nsc
 !
h
" #10@
1
A; (7)
which can be compared to the fraction of light absorbed in
the traditional 4n2 limit,10
F4n2 ¼ a
.
aþ ½4n2sch
1
 
: (8)
In order to exceed the 4n2 limit, F1-mode must be greater than
F4n2 . With the condition F1mode > F4n2 , we obtain our cen-
tral result,
bm
k0
 
vradg
vmg
 !
Cm > 4nsc
h
k
 
: (9)
Thus in order to surpass the 4n2 limit, we want well-confined
modes (Cm 1) that have large propagation constants
(bm> k0), small group velocities (vmg < v
rad
g ), and waveguide
thicknesses that are small compared to the wavelength of the
incident light. By comparing Eqs. (7) and (8), we note that
the path length enhancement lpath is
lpath ¼
c
vmg
 !
bm
k0
 
k
h
 
Cm: (10)
The actual path length is lpath h for the single mode wave-
guide case compared to 4n2h for the traditional limit.
For a given waveguide structure, the dispersion relation is
calculated to determine the modal parameters needed for Eq.
(9). Figure 1 shows the dispersion relation for several struc-
tures based on a thin film of P3HT:PCBM, a common poly-
mer solar cell blend.11 The propagation constants are obtained
from the x-axis, and the slopes of the curves are proportional
to the group velocities. Traditional photonic modes for the
slab are confined to the region between the vacuum light line
and the absorber light line (light blue region). In this region,
bm< k0, vmg > v
rad
g , and Cm  1 when the waveguide is thin.
Thus, these photonic slab modes cannot surpass the 4n2 limit,
which is the conclusion reached by Stuart and Hall as they
considered only modes in this region.4
Figure 1 also shows the dispersion relation for three
structures that have large bm, slow vmg , and large confinement
factors. These structures include a surface plasmon polariton
waveguide, a high-low-high index dielectric slot waveguide,
and a metal-insulator-metal (MIM) waveguide. These disper-
sion curves represent the lowest order TM modes for the
structures; however, higher order modes may exist depend-
ing on the thickness of the slab. While Eq. (9) is strictly valid
only for a single, highly confined mode, the behavior of the
FIG. 1. (Color online) Waveguide dispersion relations. Plasmonic (solid
red), metal-insulator-metal (dashed red), and high-low-high index dielectric
slot (dashed green) waveguides have dispersion relations that lie to the right
of the bulk absorber light line (solid blue), which have large propagation
constants, slow group velocities, and are well-confined.
FIG. 2. (Color online) Surface plasmon polariton waveguides that beat the
4n2 limit. (a) Calculated absorption enhancement (for k¼ 580 nm) surpasses
the 4n2 limit for a large range of thicknesses. The shaded region corresponds
to the region where the limit is surpassed if only one mode were present.
The appearance of a second mode (vertical dashed line) allows the absorp-
tion to surpass the 4n2 limit beyond the region predicted by the single mode
model. (b) Plasmonic waveguide absorption surpasses the 4n2 limit through-
out the useful absorbing spectrum of the polymer. Inset: Schematic of the
plasmonic waveguide and the modal profile.
121121-2 Munday, Callahan, and Atwater Appl. Phys. Lett. 100, 121121 (2012)
Downloaded 27 Apr 2012 to 131.215.220.186. Redistribution subject to AIP license or copyright; see http://apl.aip.org/about/rights_and_permissions
fundamental mode is often a good indicator of the overall
absorption characteristics, as we shall see below.
A thin surface plasmon polariton waveguide (Fig. 2) sat-
isfies the necessary conditions to surpass the 4n2 limit for a
variety of wavelengths and slab thicknesses. Using Eq. (9),
we find that the path length enhancement should exceed 4n2
for absorber thicknesses between 50–105 nm (shaded
region). However, the condition of only one well-confined
mode in the structure is not met for thicknesses larger than
70 nm, because a second mode exists for larger slab thick-
nesses. Further, below 50 nm, the confinement factor is
reduced. Figure 2(a) shows the actual absorption enhance-
ment beyond 4n2 (circles) for k¼ 580 nm using Eq. (4),
which takes into account both propagating and radiation
modes. This structure surpasses the 4n2 limit for the entire
range. The wavelength resolved absorption for a 50 nm thick
slab of P3HT:PCBM on Ag is shown in Fig. 2(b).
A high-low-high index dielectric slot waveguide is also
found to exceed the 4n2 limit. This structure consists of a
10 nm P3HT:PCBM layer cladded on both sides by a 45 nm
layer of GaP, a wide bandgap semiconductor with an indirect
energy gap whose absorption is negligible over the wave-
length region of consideration and whose real part of the re-
fractive index exceeds that of P3HT:PCBM. This structure
supports multiple modes; however, we can use our expres-
sion for the path length enhancement to predict whether or
not the structure could surpass the 4n2 limit if only one mode
were present. Figure 3(a) shows that the lowest order TE and
TM modes for k¼ 580 nm would both have path length
enhancements in excess of 4n2 if this were a single mode
waveguide.
Figure 3(b) shows the total absorption in the slot wave-
guide and the fraction of absorption coming from each of the
modes. For wavelengths below 620 nm, there are three prop-
agating modes; however, for longer wavelengths, there are
only two modes because the second order TE mode is cut
off. Because the cladding layer is thin, the radiation modes
were assumed to be incident from vacuum and resulted
in< 1% of the total absorption. If the radiation modes were
allowed to occupy the full 4p steradians, qrad would still con-
tribute to less than 3% of the total absorption. Thus the main
contribution to the absorption comes from the propagating
waveguide modes. We note that the absorption in this high-
low-high index dielectric slot waveguide is in excellent
agreement with the calculated absorption using the local den-
sity of optical states, as recently shown in Ref. 9. A key new
feature of using the dispersion relations is that we can now
determine the individual contributions of each waveguide
mode. We find that both the fundamental TE and TM modes
give nearly equal contributions to the enhancement for this
structure.
Finally, we explore a hybrid waveguide that combines
the benefits of both a high index cladding and a plasmonic
back reflector to achieve over 90% absorption in a 10 nm
P3HT:PCBM layer—well in excess of the 4n2 limit for
P3HT:PCBM. The high index GaP cladding further confines
the mode and reduces its group velocity. Figure 4 shows the
total waveguide absorption, the absorption expected for 4n2
passes, and the absorption obtained by a 10 nm thick
FIG. 3. (Color online) Dielectric slot waveguide that beats the 4n2 limit. (a)
Path length enhancement if only one mode were present. Both the lowest
TM and TE modes surpass 4n2. Insets: Mode profiles. (b) Modal decomposi-
tion of the absorbed fraction of the incident light. The total absorption sur-
passes the 4n2 limit. Inset: Schematic of the high-low-high index dielectric
slot waveguide.
FIG. 4. (Color online) Absorption for a plasmonic waveguide cladded with
a high index (GaP) top layer. Waveguide absorption (circles) is well in
excess of the 4n2 limit (solid line) and the calculated absorption limit for a
planar slab in vacuum (dashed line).
121121-3 Munday, Callahan, and Atwater Appl. Phys. Lett. 100, 121121 (2012)
Downloaded 27 Apr 2012 to 131.215.220.186. Redistribution subject to AIP license or copyright; see http://apl.aip.org/about/rights_and_permissions
P3HT:PCBM film surrounded by vacuum. Note that the
10 nm thick P3HT:PCBM film in vacuum has a significantly
lower absorption than would be expected by the 4n2 limit.
This is due to the fact that the photonic modes are not well
confined, have higher group velocities than do modes in the
bulk, and have small propagation constants, which are in
agreement with the conclusions of Ref. 4.
In summary, we have described a general method for
predicting whether or not thin waveguides can have absorp-
tion enhancements in excess of the 4n2 limit based on their
dispersion relations. We gave several examples of such
structures by including plasmonic back reflectors and/or high
index claddings in order to manipulate the modal propaga-
tion constant, group velocity, and confinement factor. Our
results are in agreement with recent studies that calculate the
local density of optical states9; however, the method pre-
sented here allows us to resolve the contributions of the indi-
vidual waveguide modes, which can be enhanced further
through appropriate waveguide dispersion engineering.
Thus, our results provide both a qualitative and quantitative
design scheme for improving the light trapping in thin films,
which is highly desired for solar cell applications.
The authors acknowledge helpful discussions with
E. Schiff, P. Saeta, M. Leite, S. Burgos, E. Feigenbaum,
E. Kosten, J. Fakonas, D. O’ Carroll, J. Grandidier, V. E.
Ferry, and K. Aydin. This work was supported by the Energy
Frontier Research Center program of the Office of Science
of the Department of Energy under Grant DESC0001293
(J.N.M.) and by Department of Energy under Grant DOE
DE-FG02-07ER46405 (D.M.C.).
1J. N. Munday, D. M. Callahan, C. Chen, and H. A. Atwater, 37th IEEE
Photovoltaic Specialists Conference (PVSC), Seattle, WA (June 2011).
2E. Yablonovitch and G. D. Cody, IEEE Trans. Electron. Devices 29(2),
300 (1982).
3E. Yablonovitch, J. Opt. Soc. Am. 72(7), 899 (1982).
4H. R. Stuart and D. G. Hall, J. Opt. Soc. Am. A 14(11), 3001 (1997).
5D. Zhou and R. Biswas, J. Appl. Phys. 103(9), 093102 (2008).
6E. A. Schiff, J. Appl. Phys. 110(10), 104501 (2011).
7Z. Yu, A. Raman, and S. Fan, Proc. Natl. Acad. Sci. 107 (41), 17491
(2010).
8Martin A. Green, Prog. Photovoltaics 19, 473(2011).
9D. M. Callahan, J. N. Munday, and H. A. Atwater, Nano Lett. 12, 214
(2012).
10T. Tiedje, E. Yablonovitch, G. D. Cody, and B. G. Brooks, IEEE Trans.
Electron Devices 31(5), 711 (1984).
11M. T. Dang, L. Hirsch, and G. Wantz, Adv. Mater. 23(31), 3597 (2011).
121121-4 Munday, Callahan, and Atwater Appl. Phys. Lett. 100, 121121 (2012)
Downloaded 27 Apr 2012 to 131.215.220.186. Redistribution subject to AIP license or copyright; see http://apl.aip.org/about/rights_and_permissions


https://authors.library.caltech.edu/31264/1/Munday2012p17955Appl_Phys_Lett.pdf

Light trapping beyond the 4n^2 limit in thin waveguides

Abstract

Similar works

Full text

Available Versions

Caltech Authors - Main

Caltech Authors - Main