This work verifies and validates the calibration in a marine geophone by
means of a hyperbaric chamber before and after the pressure underwater laboratory
test. The objective is to characterise the transfer function according to the
frequency of coupling between the geophone and the sediment. It is possible to observe
the geophone coupling variations through the sediment after the test inside
the water pressure at the equivalent of 200 metres depth

García Benadí, Albert

Nogueras Cervera, Marc

Roset i Juan, F. Xavier

This work verifies and validates the calibration in a marine geophone by

means of a hyperbaric chamber before and after the pressure underwater laboratory

test. The objective is to characterise the transfer function according to the

frequency of coupling between the geophone and the sediment. It is possible to observe

the geophone coupling variations through the sediment after the test inside

the water pressure at the equivalent of 200 metres depth.Peer Reviewe

Roset Juan, Francesc Xavier

Garcia Benadí, Albert

UPCommons

Underwater seismometer validation

This work verifies and validates the calibration in a marine geophone by
means of a hyperbaric chamber before and after the pressure underwater laboratory
test. The objective is to characterise the transfer function according to the
frequency of coupling between the geophone and the sediment. It is possible to observe
the geophone coupling variations through the sediment after the test inside
the water pressure at the equivalent of 200 metres depth.Peer Reviewe

UPCommons. Portal del coneixement obert de la UPC

Instrumentation Viewpoint 829 m2UNDERwATER SEISmOmETER VALIDATION xavier Roset, marc Nogueras, Albert Garcia Universitat Politècnica de Catalunya (UPC), Rambla Exposicio s/n, 08800, Vilanova i la Geltru, Spain.Abstract - This work verifies and validates the calibration in a marine geophone by means of a hyperbaric chamber before and after the pressure underwater labo-ratory test. The objective is to characterise the transfer function according to the frequency of coupling between the geophone and the sediment. It is possible to ob-serve the geophone coupling variations through the sediment after the test inside the water pressure at the equivalent of 200 metres depth.I.INTRODUCTIONIn marine seismic prospecting, the seismometer acquires the vibrations of the seabed. The waveforms can be artificially generated at an oceanographic vessel on board and registered by the OBS (Ocean Bottom Seismometer), which can record natural seismicity too. With appropriated mathematical algorithms, the cortical distribution can be deduced (speed, deepness); the geological proper-ties of the rocks and constitutive layers can be studied as well. The OBS mea-sures the refracted vibrations of the seabed by means of a geophone with three orthogonal sensors GS11 and frequency range from 0.1 to 100 Hz, in order to investigate the composition and stratification of oceanic subsoil.II.MEASURES IN THE LABThe initial test is to calibrate the geophone without sediment with a shaker ta-ble, put inside the hyperbaric chamber; moreover, in order to obtain its transfer function of voltage output according to vibration in m/s, at the end calibrate in the same conditions and orientations like a first calibration. To characterise the underwater performance and the sediment interaction with Fig.1 Sediment box and geophone in a shakerthe geophone we need a precise model to obtain the real answers.  The similar calibrations of geophone channels through the sediment on the shake table are tested (figure 1).The next process is to put the sediment box and the geophone inside the hyperbaric chamber at 20 atmospheres of water pres-sure to measure the output of the geophone sensors to know its performance, changes and response underwater at a depth of 200 meters. The last process is to calibrate once more the sensors of the geophone through the sediment and compare it with the first calibrations both under the water and without water, in the exactly same conditions of the initial tests.The  second calibration results in the geophone channels get the similar sen-sibility transfer functions, which are compared in figure 2 and we can observe the same values and some change of frequency of maximum in the H2 channel sensibility.III.RESULTS AND DISCUSSIONWe can observe in figure 2 that the geophone supported the water pressure and worked correctly underwater thanks to airtight structure and its sensibil-ity is the same after the underwater test. The sensibility is practically the same (±3%) when testing the sensor geophone, except at highest frequency due to a resonant effect in the shaker and its support structure.Fig.2 Compared sensibility H2 channel geophone by sedimentThe results showed the good behaviour of the geophone designed structure and validates the design in the real test in underwater conditions that do not change the sensibility of the geophone and the coupling sensibility after ex-treme pressures such as oceanic trenches of 6000m.ACKNOWLEDGMENTSSpecial thanks to the project Signal Transmission in Light and Autonomous Un-derwater Sensors (CTM2004-04510-C03-00) funded by the Spanish Research and Technology Management Unit (DGICYT), as a continuation of the proj-ect New Generation of Light and Autonomous Underwater Sensors-SENSUAL (Ref:REN2000-1016-C02-01/02) which is a joint work between Technical Univer-sity of Catalonia (UPC), Marine Technology Unit (UTM) and Technical University of Navarra (UPN) Tecnoterra Associated Unit.

Revistes Catalanes amb Accés Obert

This work verifies and validates the calibration in a marine geophone by
means of a hyperbaric chamber before and after the pressure underwater laboratory
test. The objective is to characterise the transfer function according to the
frequency of coupling between the geophone and the sediment. It is possible to observe
the geophone coupling variations through the sediment after the test inside
the water pressure at the equivalent of 200 metres depth.Peer ReviewedPostprint (published version

English

https://upcommons.upc.edu/bitstream/2117/8818/1/Underwater%20seismometer%20validation.pdf

Underwater seismometer validation

Abstract

Similar works

Full text

Available Versions

UPCommons

UPCommons. Portal del coneixement obert de la UPC

UPCommons

Revistes Catalanes amb Accés Obert

UPCommons. Portal del coneixement obert de la UPC