The scope of this thesis is the study of the interplay between structure and magnetism in amorphous materials. The investigations focus on the growth of amorphous layers and the study of the influence of structural disorder and reduced physical extension on the magnetic properties of thin films and multilayers. The examined magnetic materials are FeZr alloys, as well as other amorphous transition metal alloys such as CoZr and FeCoZr. Thin films and multilayers of the studied materials were deposited using magnetron sputtering in ultra-high vacuum conditions. Their amorphous structure and layering quality was investigated using X-ray scattering techniques and in several cases with transmission electron microscopy. The chemical composition of the alloys was determined with Rutherford Backscattering Spectrometry. The magnetic properties were investigated using the magneto-optic Kerr effect and SQUID magnetometry, as well as polarized neutron reflectometry and X-ray magnetic circular dicroism measurements. For FeZr alloys deposited as multilayers with Al2O3 as spacer layer, it was found that Fe-rich nanocrystallites, formed at the metal/oxide interfaces, exert large influence on the magnetic properties. The use of AlZr alloys as buffer layers promotes the growth of highly amorphous FeZr layers. FeZr/AlZr multilayers with good layering quality can also be obtained. The influence of the reduced layer thickness on the magnetic moment, Curie temperature and magnetic dimensionality of the magnetic layers is addressed for FeZr/AlZr multilayers. Thin FeZr layers in these structures are found to belong to the 2D XY dimensionality class. The change of the magnetic moment and Curie temperature with reduced FeZr layer thickness is quantified. In addition, the induced magnetic moment in the alloy element Zr was investigated in FeZr and CoZr alloy films. The possibility to imprint a preferred magnetization direction during thin film preparation was demonstrated for FeCoZr layers. Lastly, AlZr alloy films were studied with respect to their oxidation stability at room and elevated temperatures, aiming towards development of materials with passivating properties
