4 pp., 2 figuresThis publication explains the process, components, legal requirements, factors affecting performance, and maintenance needs of liquid chlorination systems for onsite wastewater treatment

Lesikar, Bruce J.

O'Neill, Courtney

Richter, Amanda

Weaver, Richard

Texas A&amp;M Repository

DisinfectantstoragePump tankSpray headsWastewatertreatmentsystemOnsite wastewater treatment systemsLiquid chlorinationL-54609-08Figure 1: A liquid chlorination system for residential wastewater treatment.Before treated wastewater can be distributed to lawns, it must be disinfected to remove disease-causing organisms. The three primary disinfecting agents used are chlorine, ultraviolet light, and ozone. The most common method of disinfection for onsite wastewater treatment systems is chlorination. Chlorine is highly effective in re-ducing odors and disinfecting water. It is usually dispensed in one of three forms: tablet (calcium hypochlorite), liquid (sodium hypochlorite, which is household bleach) or gas (Cl2, which is liquid when pressurized). For residential wastewater treat-ment systems, the two main forms used are tablet and liquid chlorine. Gaseous chlorine is very dangerous and requires skilled operation, which limits its use to municipal systems.This fact sheet focuses on liquid chlorination. For more information about tablet chlorination, please see Extension publication L-5344, Tablet Chlorination.The processBefore chlorination, wastewater leaves the home and passes through an advanced pretreatment system such as an aerobic treatment unit, sand filter, or media filter. These ad-vanced pretreatment systems remove most of the organic matter and sus-pended solids from the wastewater. The organic matter and sus-pended solids must be removed from the wastewater first; otherwise, the chlorine will react with these materi-als instead of disinfecting the target organisms. Also, these materials will provide physical barriers to protect the pathogens. Once treated, the effluent collects in a pump tank, which serves as a Bruce Lesikar, Amanda Richter, Richard Weaver and Courtney O’Neill Professor and Extension Agricultural Engineer, Research Associate, Professor in Soil and Environmental Microbiology, and Extension AssistantThe Texas A&M System reservoir for the wastewater until it is distributed into the soil. The tank also is generally where the chorine is mixed with the effluent. After chlorination, the treated wastewater is distributed into the soil periodically in what are called dosing events. Dosing events can be activated either by a float in a demand-dosed system or by a timer in a timer-con-trolled or night-dosing system.System componentsVarious types of liquid chlo-rinator systems are available for disinfecting wastewater. They may be purchased from manufacturers or distributors or through install-ers. All liquid chlorinator systems include some form of the following components: chlorine bleach, a stor-age reservoir, a powering mechanism, and a metering device.The chlorine bleach kills the disease-causing organisms, or patho-gens, in the wastewater. Chlorine bleach can be purchased from vari-ous stores and is available in several chlorine concentrations, including 3 percent, 5 percent, 5.25 percent, 6 percent, and 13 percent. It is vital that you choose a prod-uct that is specifically labeled (reg-istered with the U.S. Environmental Protection Agency) for disinfecting wastewater and that meets the chlo-rine concentration specified by the manufacturer of the chlorinator.Using a bleach product not la-beled for disinfection of wastewater is a violation of the Federal Insecticide, Fungicide, and Rodenticide Act. Use products only in accordance with their label instructions. The storage container holds the bleach until it is dosed into the efflu-ent. This reservoir usually is made of a plastic container or PVC piping. It may be located inside the pump tank, located outside the pump tank on the ground surface, or buried in the ground.The reservoir holds a specific amount of chlorine. The amount it holds will determine the length of time between additions of bleach. The bleach is added to the reservoir by the homeowner, another responsible person, or the operation and mainte-nance service provider.The powering mechanism sends a dose of chlorine to the effluent and mixes it with the wastewater. When the pump turns on to distribute the treated effluent, the water flowing through an aspirator will generally power the mechanism that doses chlorine into the wastewater. The wa-ter flow through the aspirator creates a vacuum that pulls bleach from the reservoir and doses it into the pump tank.The metering device controls the chlorine dose. The device is placed in the supply system to restrict the amount of chlorine delivered to the pump tank. Several types of metering devices are available. The meter can restrict the dose to a specific volume of chlorine, to a specific flow rate, or to operation for a specific period of time.Legal requirementsIf wastewater is to be applied to a lawn or other ground surface, Texas regulations require that it contain at least 0.1 mg of residual chlorine per liter of wastewater and have no more than 200 fecal coliforms (a type of bacteria found in human or animal waste) per 100 milliliters of wastewater. Because the constituents in the wastewater neutralize some of the bleach, much more than 0.1 milligram of chlorine per liter will need to be added to obtain the proper residual. The amount of organic matter in water is often measured in 5-day biochemical oxygen demand (BOD5) units. The higher the BOD5, the more organic matter there is in the water and the more chlorine needed for proper disinfection.In a liquid chlorination system, the bleach is introduced into the pump tank when the tank contains a specific amount of wastewater (as determined by a float) or through a Various types of liquid chlorinator systems are available for disinfecting wastewaterFigure 2: In a liquid chlorination system, the metering device controls the dose of chlorine delivered to the pump tank.Metering devicetimer system. This dosing must be precise to ensure that the wastewater contains the correct amount of chlo-rine. If there is too little chlorine, the water is not disinfected properly; too much chlorine can harm the grass in the spray field.Kits are available to measure chlorine levels in water. However, some test kits made for chlorine testing in swimming pools are not sensitive enough to measure 0.1 mg of residual chlorine per liter in waste-water.Factors affecting  performanceSeveral factors affect the perfor-mance of chlorine as a wastewater disinfectant:Mixing ✔ , the action of introduc-ing the chlorine into the waste-water to make sure all the con-stituents in the wastewater come into contact with the chlorine.Contact time ✔ , the amount of time needed for the chlorine to react with the constituents and kill the disease-causing microor-ganisms, or pathogens.Dosage ✔ , the concentration of chlorine in the wastewater. There is a direct relationship between contact time and dosage. Gener-ally, the more chlorine that is dosed to the wastewater, the less contact time needed to kill the pathogens.Residual concentration ✔ , the concentration of chlorine that remains in the wastewater after the contact time has passed. This residual concentration is impor-tant because some organisms can be introduced into the waste-water after the initial treatment. These pathogens also need to be killed.The  ✔ residual concentration is also the concentration needed to meet regulatory requirements. For most residential chlorination systems, the chlorine residual is monitored by the system’s opera-tion and maintenance service provider.How to keep it workingIt is very important to follow all installation and maintenance guide-lines. To ensure proper chlorination:Keep chlorine bleach in the  ✔reservoir at all times. The rate of chlorine use may vary with water If wastewater  is to be applied  to a lawn or other ground surface,  Texas regulations require that it contain at least 0.1 mg  of residual chlorine  per liter  of wastewaterThe Onsite Wastewater Treatment Systems series of publications is a result of collaborative efforts of various agencies, organizations and funding sources. We would like to acknowledge the following collaborators:Texas State Soil and Water Conservation Board USEPA 319(h) ProgramTexas On-Site Wastewater Treatment Research Council Texas AgriLife Extension ServiceTexas Commission on Environmental Quality Texas AgriLife ResearchConsortium of Institutes for Decentralized Wastewater Treatment USDA Natural Resources Conservation ServiceEducational programs of the Texas AgriLife Extension Service are open to all people without regard to race, color, sex, disability, religion, age, or national origin.Issued in furtherance of Cooperative Extension Work in Agriculture and Home Economics, Acts of Congress of May 8, 1914, as amended, and June 30, 1914, in cooperation with the United States Department of Agriculture. Edward G. Smith, Director, Texas AgriLife Extension Service, The Texas A&M System. 10M, RevisionProduced by AgriLife Communications, The Texas A&M SystemExtension publications can be found on the Web at: http://AgriLifeBookstore.org.Visit Texas AgriLife Extension Service at http://AgriLifeExtension.tamu.edu.usage. If the chlorine reservoir is emptying much faster than nor-mal, or if the chlorine level seems to be staying the same from day to day, there is a good chance that the chlorinator is malfunc-tioning and needs maintenance.Keep the reservoir closed and the  ✔lid fastened securely to prevent chlorine gas from forming and making the bleach less potent. Eliminate air leaks in the  ✔vacuum system when using an aspirator to power the system.Calibrate the chlorine dosage to  ✔ensure that the water is chlori-nated properly. It may take some effort. The method of calibration varies with the type of system, and an initial period of trial and error may be necessary. Use a chlorine test kit to determine the chlorine concentration in the pump tank.If the liquid chlorinator is mal- ✔functioning, contact the manu-facturer or your maintenance provider for help.All methods for disinfection of wastewater effluent require mainte-nance. Over all, liquid chlorination is very effective when the chlorina-tors are properly calibrated and the system is maintained regularly.It is very important to follow installation and maintenance guidelines

Onsite Wastewater Treatment Systems:  Liquid Chlorination

http://oaktrust.library.tamu.edu/bitstream/handle/1969.1/87270/pdf_2018.pdf?sequence=1&isAllowed=y

Onsite Wastewater Treatment Systems: Liquid Chlorination

Abstract

Similar works

Full text

Available Versions

Texas A&M Repository