'Institute of Electrical and Electronics Engineers (IEEE)'
Doi
Abstract
An analysis is presented for the transfer functions of a particular pulse-width modulator and power switch subsystem that has been widely used in practical switching-mode d-c regulator systems. The switch and filter are in a "buck" configuration, and the switch is driven by a constant-frequency variable duty-ratio push-pull magnetic modulator employing square-loop cores. The two transfer functions considered are that with modulator control signal as input and that with line voltage as input. For a-c signals, the corresponding describing functions (DF) are derived. It is shown that current-source drive to the modulator extends the control DF frequency response over that with voltage drive, and that complete cancellation of the effects of line variations can be obtained at d-c but not for a-c. Experimental confirmation of the analytical results for the control DF are presented
