The search for traces of life on other planets has been one of the perspectives of science ever since. The water ice
in the polar regions on Mars and the icy Jovian moon Europa or the subglacial lakes in the Antarctica are places
of interest for astrobiological research.
Considering the astrobiological potential of these sites, the best way to explore their mysteries is to send a vehicle for the in-situ investigation of the chemical and biological properties of the ice layers. In the past, several
concepts of melting probes, so called ‘Cryobots’, have been proposed for this purpose.
These melting probes are an effective way to bring research instruments to an operational depth, where it is
guaranteed that the overburden soil or ice protects the traces of life from galactic rays. However, these probes
might get stuck if soil accumulates in front of the probe.
At the German Aerospace Center DLR, a hammering drill (‘mole’), called PLanetary Underground TOol
(PLUTO) has been developed for the BEAGLE 2 lander, to represent a new and promising direction for subsurface
sampling and in-situ measurements. This innovative lightweight and low power solution should be combined with
heaters to melt the ice.
This paper shall present the results of a simulation and a parameter study and propose first design concepts
based on these results.
The parameter study includes a discussion of the length to diameter ratio, the cone angle of the tip, the
surface roughness of the housing, the mass of the housing and the ice temperature. The results of the parameter
studies, for example, confirm an optimal performance for a cone angle of 60� and suggest to increase the length
of the Mole rather than the diameter to enlarge the volume.
The first design concepts propose possible payloads and specify the total volume needed to shelter the
heaters and the payload. Moreover ways to integrated the heaters in the tip and the structure of the original mole
are described.
Due to the increase in mass the hammering mechanism has to be redesigned. This new more powerful
hammering mechanism is presented in this paper as well