We report on the preparation of disposable potentiometric sensor strips for monitoring sodium in sweat. We also present their integration in a microfluidic chip used to harvest sweat in-situ during exercise. The sensor-chip is integrated with a miniaturized electronic platform able to transmit data wirelessly in real time during a stationary cycling session in a controlled environment

Diamond, Dermot

Fay, Cormac

Matzeu, Giusy

McNamara, Eoghan

O'Quigley, Conor

O\u27Quigley, Conor

Irish Universities

Screen printed electrochemical sensors for real-time sodium monitoring in sweat

Name not available

Screen Printed Electrochemical Sensors for Real-Time Sodium Monitoring in Sweat Giusy Matzeu1, Conor O’Quigley2, Eoghan McNamara2, Cormac Fay2 and Dermot Diamond2 1CLARITY Centre for Sensor Web Technologies, National Centre for Sensor Research, Dublin City University, Dublin 9, Ireland, 2Insight Centre for Data Analytics, Dublin City University, Dublin 9, Ireland One of the key technological challenges in sensor design is providing low-cost, minimally invasive devices for in situ and real-time monitoring of chemicals produced by the human body1. The ease of access to body fluids such as saliva and sweat makes interesting applications of wearable sensors suitable for use in health care3 and sport science4. We report on the preparation of disposable potentiometric sensor strips for monitoring sodium in sweat. We also present their integration in a microfluidic chip used to harvest sweat in-situ during exercise. The sensor-chip is integrated with a miniaturized electronic platform able to transmit data wirelessly in real time during a stationary cycling session in a controlled environment. Combination-electrodes are prepared by screen printing in order to reduce costs5. An appropriate solid contact material is interposed between the carbon layer and the drop-cast outer membranes of the  ion-selective & reference electrodes. The selective response of the ion-selective membrane is due to the presence of an ionophore, while the reference membrane is insensitive to changes in the sample composition. By measuring the potential bias between the two electrodes, the concentration of the primary ion in solution can be inferred.                                 References 1. Diamond, D. Analytical Chemistry 2004, 76, 278. 2. Mora Rodriguez, R.; Hamouti, N. Medicine and Sport Science 2013, 59, 113. 3. Domínguez Renedo, O.; Alonso-Lomillo, M. A.; Arcos Martínez, M. J. Talanta 2007, 73, 202   Acknowledgements This work was supported by Science Foundation of Ireland under the grants 07/CE/I1147  and  12/RC/2289.   Electrode 500 µm PMMA  80 µm PSA  1 mm PMMA  80 µm PSA  80 µm PSA  1.5 mm PMMA  ○ double-liquid junction Ag/AgCl RE □ solid contact RE  Figure 1 shows the average calibration of 3 Na-ISEs vs a standard double liquid junction Ag/AgCl reference electrode and a miniaturised solid contact reference electrode realised on a screen printed substrate. The concentration range of interest was 10-5-10-1 M Na+. Figure 2 displays an expanded view of the different layers used to realise the microfluidic chip that was mounted on top of the potentiometric strip. This configuration allows sweat to be collected through a Mega-Duct directly connected to the microfluidics, as shown in Figure 3.  Figure 1. Calibration of Na-ISEs vs solid contact and Ag/AgCl RE Real time tests were carried out with the microfluidic chip, positioned on top of the Na+ selective potentiometric strip, which was connected to a miniaturised wireless electronic platform protected by a 3D-printed encasing (Figure 4).  The signal shows a pronounced change after ~15 minutes (Figure 5), which corresponds to the delay in onset of sweat generation, coupled with the time required for the sweat to travel from the skin through the Macro-Duct and microfluidic module to the sensor strip. Figure 2. Microfluidic chip mounted on top of the screen printed potentiometric strip Figure 3 Macro-Duct system used to harvest sweat After validation of the potentiometric system, we are planning to further reduce its dimensions. Current design efforts in our group are targeted towards the realisation of a wearable watch-like device. Figure 4. Device used to carry out real-time  sodium tests Figure 4. Real-time potential variation during a stationary cycling trial Figure 5. Watch like future design 

DCU Online Research Access Service

http://doras.dcu.ie/20011/1/Screen_Printed_Electrochemical_Sensors_for_Real-Time_Sodium_Monitoring_in_Sweat.pdf

Screen printed electrochemical sensors for real-time sodium monitoring in sweat

Abstract

Similar works

Full text

Available Versions

Irish Universities

Name not available

DCU Online Research Access Service