We demonstrate a six spatial-mode, wavelength-routing network interoperable with few-mode, coupled-multi-core, and single-mode fiber spans using a custom 57-port wavelength-selective switch configured for joint-switching of spatial-superchannels

Alam, S.U.

Blau, M.

Chen, H.

Essiambre, R.

Fontaine, N.K.

Frenkel, B.

Haramaty, T.

Jung, Y.

Kang, Q.

LaRochelle, S.

Marom, D.M.

Messaddeq, Y.

Miron, L.

Pascar, L.

Richardson, D.J.

Ryf, R.

Sahu, J.K.

Wang, L.

Southampton (e-Prints Soton)

Th5C.5.pdf OFC Postdeadline Papers © OSA 2015Heterogeneous Space-Division Multiplexing andJoint Wavelength Switching DemonstrationN. K. Fontaine1, T. Haramaty2, R. Ryf1, H. Chen1, L. Miron2, L. Pascar2, M. Blau2,B. Frenkel2, L. Wang3, Y. Messaddeq3, S. LaRochelle3, R. J. Essiambre1, Y. Jung4,Q. Kang4, J. K. Sahu4, S. U. Alam4, D. J. Richardson4 and D. M. Marom2nicolas.fontaine@alcatel-lucent.com1Bell Laboratories, Alcatel-Lucent, 791 Holmdel Rd., Holmdel, NJ 07733, USA2 Applied Physics Dept., Hebrew University, Jerusalem, Israel3 COPL, Universite´ Laval, Que´bec QC, Canada G1V0A64 Optoelectronics Research Centre, University of Southampton, Southampton, SO17 1BJ, UKAbstract: We demonstrate a six spatial-mode, wavelength-routing network interoperablewith few-mode, coupled-multi-core, and single-mode fiber spans using a custom 57-portwavelength-selective switch configured for joint-switching of spatial-superchannels.OCIS codes: 060.6718, 060.1660.1. Introduction: Need for Joint Switch Compatible with all Types of FibersSpace-division multiplexing (SDM) uses parallel spatial paths in novel fibers to provide capacity increases over single-mode fiber (SMF) systems. These spatial paths can be the cores in a multi-core fiber (MCF), the spatial modes in afew-mode fiber (FMF), and even parallel strands of SMF. All these fibers are suitable for transmission and some keyresults include>305-Tb/s over 19-core fiber [1], 1.01-Pb/s over 52-km of 12-core fiber [2], 177-km of FMF supportingsix spatial modes [3], and 1705 km of coupled-core MCF (CC-MCF) [4].It is unclear which SDM fiber provides the best performance, and in the future, network operators may deploydifferent SDM fibers throughout the network. Figure 1a) shows such a network with 4 nodes that uses six spatial chan-nels. The nodes are interconnected with three different SDM fibers: six parallel SMF strands, an amplified FMF spanwith six spatial modes, and an amplified CC-MCF with six-cores. To route signals through the network, wavelengthselective switches (WSSs) can be used in switching nodes to direct wavelength channels between different locations.In an SDM network with different fibers, the WSS must be capable of interfacing and routing the different spatialmodes of each type of SDM fiber in addition to handling the multiplicity of the additional spatial channels. PreviousFig. 1: a) Heterogenous SDM network with different six spatial-mode fiber spans. b) Joint wavelength selective switch (WSS) for simultaneouslyswitching all modes. The beam forming optics to optimize resolution and port count, and the polarization diversity optics are not shown. c) Photoniclantern fiber interface for FMF and tapered fiber bundles for interfacing to the six-core span.Th5C.5.pdf OFC Postdeadline Papers © OSA 2015Fig. 2: a) Transmitter with six spatial channels. b) SDM receiver with offline MIMO processing. c) Experimental arrangement. Spectral insets aremeasured after the first receiver amplifier. ECL: External Cavity Laser, LO: Local Oscillator.WSS demonstrations include a 1×2 for 7-core MCF built using a commercial 1×20 SMF WSS [5], a 1×11 for threemode FMF built from a commercial twin 1×24 [6], a 1×2 WSS with internal spatial-diversity with 3 spatial-modeFMF inputs [7], and a 1×9 WSS with direct 3 spatial-mode FMF operation [8]. All these switches use 1 dimensionalfiber array to layout the spatial-modes and ports.Here, we build a new type of WSS that arranges the SMF ports in a 2D array which can accommodate more spatialchannels, can interface with all six-spatial channel SDM fibers, and can also jointly switch 6 spatial modes to 8 outputports. Using two joint WSS, we demonstrate a heterogenous network with 3 separate SDM fibers and wavelengthrouting at two separate network locations. The 59-km FMF span contains two cladding-pumped FMF amplifiers [9],and the CC-MCF span contains a multi-core (MC) cladding-pumped erbium doped fiber amplifier (MC-EDFA) at itsinput [10].2. Joint Wavelength Selective Switch for SDM: Compatibility with Parallel SMF, FMF, and CC-MCFSpatial channels, unlike wavelength channels, are susceptible to crosstalk. Multiple-input multiple-output (MIMO)processing can unscramble crosstalk provided that all spatial-channels are routed together as a unit from the transmitterto the receiver. Otherwise, MIMO processing cannot undo the crosstalk which will reduces the system capacity [11].Additionally, having a single WSS that is designed to switch modes as a unit can obtain a much greater throughput ata cost commensurate with today’s SMF WSS. Under these constraints, it makes sense to optimize the SDM WSS andother switching elements to jointly switch the modes rather than to individual switch modes.Figure 1b) describes the operation principle of a joint WSS for six parallel spatial channels. The spatial channels onthe SDM input fibers are first demultiplexed into SMFs that are coupled to freespace Gaussian beams. Demultiplexingthe modes into identical Gaussian beams insures that each mode has same spectral transmission and same loss inthe WSS. Figure 1c) shows two SDM demultiplexers to interface with the WSS and SDM fibers: a six-mode mode-selective photonic lantern (PL) [12] to excite the modes of the FMF with 2-dB insertion loss and two tapered fiberbundles (TFB) to couple signals and multi-mode pump light into the CC-MCF and the MC-EDFA. The WSS fiberports modes are arranged into a 2D pattern (19×3), with all 6 modes from a SDM fiber arranged across two rows andthe SDM fibers accommodated vertically. A diffraction grating angularly disperses the different wavelengths and afocusing lens converges the beams to a common spot on the liquid crystal on silicon (LCoS) steering element whichapplies blazed saw-tooth holograms in the vertical direction to simultaneously steer all beams to different ports. Signalsinput into the central column return on the central column, whereas signals on the left and right columns switch places.All signals from each row converge to the same spot on the LCoS and thus have the exact same passband shape andswitching characteristic.We built two of the flexgrid WSSs with 57 ports (19 rows × 3 columns), 0.5 dB spectral resolution of 78 GHz for100-GHz spaced channels, and 5-8 dB insertion loss. Higher resolution could be obtained by illuminating more lineson the diffraction grating. Figure 3a) shows a 100-GHz interleaver passbands across the entire C-Band (5-THz) for allTh5C.5.pdf OFC Postdeadline Papers © OSA 2015Fig. 3: Interleaver passbands for a group of six spatial channels a) across entire C-Band and b) a single 100-GHz channel. c) IL statistics for allports across the C-band. BER performance for the wavelengths dropped at d) node B and e) node C and the f) through channels at node D.six modes. Figure 3b) shows a single passband, which shows only 1-2 dB insertion loss variation among the six spatialchannels. Figure 3c) shows the insertion loss statistics for 18 rows (54 ports) across the entire C-band. Degradation ofsome of the ports are due to pointing errors of the prototype fiber array and are not inherent to the design of the switch.3. Networking ExperimentFigure 2b) overviews the networking testbed from node A to node D of the hypothetical network in Fig. 1a). Figure 2a)shows the SDM transmitter which produces 40, 100-GHz spaced WDM channels, each with 30-GBd QuadraturePhase Shift Keyed (QPSK) modulation. Two I/Q modulators separately modulate the even and odd wavelengths anda polarization delay multiplexer, and fiber delays decorrelate the polarization modes and six spatial modes (12 totalspatial and polarization channels). Figure 2b) describes the SDM receiver that uses six polarization diversified coherentreceivers which share a common local oscillator (LO). Each coherent receiver contains a polarization diversified opticalhybrid, 4 balanced photodetectors and 4 40-GS/s analog-to-digital converters (LeCroy Labmaster 9zi). To measureeach wavelength channel, each received spatial mode is amplified, the wavelength is selected using the wavelengthblocker array, and then amplified again before sending into the signal ports of the optical hybrids. A 12×12 frequency-domain MIMO equalizer is used to unscramble the 12 launched spatial and polarization channels. For noise-loadingASE is injected at the transmitter.Node A and B are connected with parallel strands of 15-km SMF. At node B, 6 wavelength channels (25%) aredropped into six SMFs, and the remaining 34 are sent through to the amplified FMF span. Figure 2d) shows theBit-Error-Rate (BER) curves for the dropped SMFs. The through channels are sent through the FMF span which hastwo cladding pumped FMFs to recover for the joint WSS, and the FMF losses. At node C, 7 additional wavelengthsare dropped again into six SMFs. The BER performance of the dropped channels show approximately 3.5-dB powerpenalty at a BER of 1×10−3 compared to the dropped SMF channels. The remaining 27 wavelengths are coupled intoan amplified CC-MCF span using a TFB. Figure 3f) shows the BER represented as Q-factor at the output of the spanwhich includes transmission through two WSS, 3 SDM amplifiers, a 15-km parallel SMF span, a 59-km six mode FMFspan, and a 31-km six-core CC-MCF span. All BERs were above the soft forward error correction limit of 2×10−2.In conclusion, we have demonstrated a heterogenous SDM network with spatial multiplicity of six, using 3 types ofSDM fiber spans and a large port count joint-switching WSS supporting six-spatial modes.References[1] J. Sakaguchi et al., IEEE JLT 31, 554–562 (2013).[2] H. Takara et al., in ECOC Th.3.C.1, (2012).[3] R. Ryf et al., in OFC PDP5A.1, (2013).[4] R. Ryf et al., in ECOC, PDP1 (2014).[5] L. E. Nelson et al., IEEE JLT 32, 783–789 (2014).[6] J. Carpenter et al., Optics Express 22, 2216–2221 (2014).[7] N. K. Fontaine et al., in OFC Th4A.7, (2014).[8] D. M. Marom et al., Optics Express 23, 5723–5737 (2015).[9] Y. Jung et al., Optics Express 22, 29,008–29,013 (2014).[10] K. S. Abedin et al., Optics Express 20, 20,191 (2012).[11] P. J. Winzer et al. 19, 16,680 (2011).[12] B. Huang et al., Optics Express 23, 224–234 (2015).The authors would like to thank OFS for the FMF and Sumitomo for the CC-MCF. This work was partly supported by the IT R&D programof MKE/KEIT. [10043383, Research of Mode-Division-Multiplexing Optical Transmission Technology over 10 km Multi-Mode Fiber], by theEuropean Community’s Seventh Framework Program (FP7/2007-2013) under grant agreement ndeg 619732 (INSPACE), and by the EuropeanCommunities 7th Framework Programme under grant agreement 258033 (MODE-GAP) and the UK EPSRC grant EP/J008591/1 (COMIMO). Theauthors would like to NSERC for funding multicore doped-fiber research.

Heterogeneous space-division multiplexing and joint wavelength switching demonstration

Heterogeneous space-division multiplexing and joint wavelength switching demonstration

Abstract

Similar works

Full text

Available Versions

Southampton (e-Prints Soton)