This is a how-to publication on creating circular ruffles

Geer, Sarah

Giddens, Jen

Shirley, Lindsey

Weller, Chanae

English

DigitalCommons@USU

$-05)*/(CONSTRUCTION6UBI4UBUFJTBOBóSNBUJWFBDUJPOFRVBMPQQPSUVOJUZJOTUJUVUJPOSewing Technique: Circular RuffleA circular ruffle is created from a circular piece of fabric rather than a straight strip.  To make circular ruffles, the use of a paper pattern is recommended.  The image below illustrates the overall appearance of the finished pattern pieced for this technique.  STEP 1:  Measure the length of the edge of the fabric that the ruffle will be attached to.  This measurement will result in the circumference of the inner circle.  HINT:  The circumference is approximately the diameter multiplied by three.  The width of the ruffle can vary depending on the application.  The distance between the inner and outer circle will result in the width of the ruffle.   STEP 2:  The width of the circle will be the desired width of the finished ruffle plus extra for the hem and seam allowance.  Draw second circle.  Cut out the center circle with one cut line from the outer to inner circle.  The end result is a template that can be used to create the ruffle.STEP 4:  Stay stitch around the inner circle at the seam line.STEP 5:  Clip inner edge until the circle can be opened and lie straight.STEP 3:  If there are multiple circles, sew short ends with right sides together creating one continuous length.Written by:Sarah Geer, USU Extension InternJen Giddens, USU Extension InternChanae Weller, USU Extension InternLindsey Shirley, PhD, Clothing and Textiles SpecialistReferences: Cole, Julie, & Czachor, Sharon. (2009). Professional sewing techniques for designers. New York, Fairchild Publications, Inc. Creative Publishing. (2009). Complete Photo Guide to Sewing. Minneapolis: Creative Publishing International, Inc. Readers Digest, Editor. (2002). New Complete Guide to Sewing. China: Readers Digest.Industry Standards for a Well-Constructed Ruffleo Ruffle drape is pleasing to the eyeo Ruffle is dispersed evenly and smoothly throughout garmento Ruffle is applied to garment with straight even stitcheso Ruffles were cut even and correctlyo Appropriate fabric was usedo Inner edge of ruffle is clipped to lie flato Stay stitching is not seen from the outside of the garmento Accurate measurements are used to determine circle circumferences STEP 6:  Pin the ruffle to the garment edge, right sides together. Trim any excess ruffle length, if necessary. Sew ruffle to garment using a straight stitch.STEP 7:  Press the seam flat towards the garment and trim excess to reduce bulk as needed.STEP 8:  Hem the outer edge using preferred method. Utah State University is committed to providing an environment free from harassment and other forms of illegal discrimination based on race, color, religion, sex, national origin, age (40 and older), disability, and veteran’s status. USU’s policy also prohibits discrimination on the basis of sexual orientation in employment and academic related practices and decisions.   Utah State University employees and students cannot, because of race, color, religion, sex, national origin, age, disability, or veteran’s status, refuse to hire; discharge; promote; demote; terminate; discriminate in compensation; or discriminate regarding terms, privileges, or conditions of employment, against any person otherwise qualified. Employees and students also cannot discriminate in the classroom, residence halls, or in on/off campus, USU-sponsored events and activities. This publication is issued in furtherance of Cooperative Extension work, acts of May 8 and June 30, 1914, in cooperation with the U.S. Department of Agriculture, Noelle E. Cockett, Vice President for Extension and Agriculture, Utah State University. (Clothing&Textiles/2012-01pr)  

Sewing Technique: Circular Ruffle

https://digitalcommons.usu.edu/cgi/viewcontent.cgi?article=1086&amp;context=extension_curall

Sewing Technique: Circular Ruffle

Abstract

Similar works

Full text

Available Versions

DigitalCommons@USU