Calibration is carried out to keep up the precision of the instruments by

determining their calibre. CaUbration of hydro acoustic equipments onboard FORV

Sagar Sampada was carried out periodically and the performance records were

maintained. Deviation and the deficiencies were noted down for applying the correction

while interpreting the output of the instruments

Gopakumar, G

Mohamad Kasim, H

Natarajan, S

Ramakrishnan, A

Ravindranathan, V

CMFRI Digital Repository

Proceedings of the Second Workshop on Scientific Results of FORV Sugar Sampudu Editors V.K. Pillai S.A.H. Abidi V. Ravindran K.K. Balachandran Vikram V. Agadi a<ti*Riw3 Department of Ocean Development Government of India New Delhi 1996 11996, Department of Ocean Development Department of Ocean Development (DOD) Government of India Mahasagar Bhavan, Block No-12 C.G.O. Complex, Lodi Road New Delhi-110 003 India ISBN: 81-900656-0-2 Citation Styles For entire volume Pillai, V.K. Abidi, S.A.H., Ravindran, V., Balachandran, K.K. & Agadi, V.V. (Eds.) 1996. Proceedings of the Second Workshop on Scientific Results of FORV Sugar Sampada, (Department of Ocean Development, New Delhi), pp. 564. For individual article Goswamy, S.C. & Shrivastava, Y. 1996. Zooplankton standing stock, community structure and diversity in the northern Arabian Sea, In: Proceedings of the Second Workshop on Scientific Results of FORV Sagar Sampada, edited by V.K. Pillai, S.A.H. Abidi, V. Ravindran, K. K. Balachandran & V.V. Agadi, (Department of Ocean Development, New Delhi), pp. 127-137. Designed and Printed by: Publications & Information Directorate Council of Scientific & Industrial Research Pusa Campus, New Delhi-110 012 India Proc. Second Workshop Scient. Resul. FORV Sugar Sampada, 1996, pp.499-504 Calibrations of hydro-acoustic instruments onboard FORV Sugar Sampada S. Natarajan, Mohamad Kasim, G. Gopakumar Central Marine Fisheries Research Institute, Post Box No. 1603, Tatapuram. P.O. Cochin-682 014 V. Ravindranathan Department of Ocean Development, Foreshore Avenue, Cochin-682 016 & A. Ramakrishnan Central Institute of Fisheries Technology, Matsyapuri-P.O. Cochin-682 029 ABSTRACT Calibration is carried out to keep up the precision of the instruments by determining their calibre. CaUbration of hydro acoustic equipments onboard FORV Sagar Sampada was carried out periodically and the performance records were maintained. Deviation and the deficiencies were noted down for applying the correc-tion while interpreting the output of the instruments. INTRODUCTION FORV Sagar Sampada is engaged in fishery research work since 1985 in Exclusive Economic Zone (EEZ) of India. The vessel is equipped with most modern hydro acoustic instruments used for acoustic survey in the assessment offish resources. Fish resources assessment is vital for fishery management in planning for harvesting, processing, marketing and setting up of fish based industries. Acoustic survey is considered to be more reliable and advantageous among many other methods avail-able for fish resources estimation, since it gives the results quickly, covers larger area without destruction or damage to the resources during the survey and expenditure is comparatively less. The major equipments used onboard FORV Sagar Sampada for resources estima-tion are the scientific echosounder EK-400 operating on 38 and 120 kHz and echointegrator Simrad QD coupled with data printer TI 703. The accuracy of the 499 500 Natarajan et al. resources estimation depends on the performance of these instruments. Therefore, the calibration of these instruments are vital for maintaining the high standard of accuracy of the research findings. Calibration in general means the process of determining the calibre of instruments. It involves: i) the measurement of the equipment parameters (transmitter power output, frequency, band- width, beam-width, pulse-width etc) to confirm that they are within the specified limit, ii) the measurement of absolute value of noise level which is one of the limiting factors in the use of hydro acoustic equipments and iii) the measurement of received echo level to determine the back-scattering strength of the reflecting object, the target. The calibration was carried out on the acoustic survey equipments onboard FORVSagar Sampada and the results, since 1985, are described below. MATERIALS AND METHODS Cruises were arranged exclusively for the purpose of calibration during the calm weather season, along west coast, mostly off Trivandrum. Acoustic equipments were switched on continuously for 12 hours and ensured stable operations before com-mencing any measurements. Other heavy electrical equipments such as winches were switched off to minimise external noises. The equipment parameters like transmitter output power, frequency, band-width, pulse-width, TVG attenuation etc were meas-ured and corrected to the specified level by adjusting the pre-set controls. The test equipments used were oscilloscope, digital voltmeter, signal generator; function generator, frequency counter, attenuator, AC voltmeter and test hydrophone. The performance of the echo- integrator was tested selecting test transducer and confirmed that it was functioning to the specified level. The vessel was anchored at 40 m depth. The 60 mm copper sphere of -33.6 dB target strength was placed below the transducer along the axis of the beam. The amplitude of the echo signal was measured on the oscilloscope and the SL-(-VR was calculated using the formula of (Foote et al. 1983). SL+VR = EL-TS+20 log R+2a /• - G+40 log R where SL is source level, VR is voltage response. VL is echo level, TS is target strength, R is range of the target, r is effective range of TVG, a is absorption co-efficient and G is gain or attenuator settings. The rigging arrangement to position the standard target (copper sphere) is shown in Fig. 1. In order to bring the copper sphere to the centre of the beam around 20 m below the vessel's hull, 3 electrically operated winches were used. The winches were locally fabricated using a 12 V DC motor (whiper motor) with a small cable drum fixed to the shaft of the motor. The cable drum was wound with 0.60 mm diameter steel wire used to suspend the copper sphere. The winches were fixed on to the pre-fabricated triangular aluminium frame with a small pully at one end. Two frames were fixed on the star board side of the gun-wale (raised edge of the deck of the ship) Calibration of instruments 501 Fig. 1 - Rigging of a research vessel for calibration using copper sphere as target and one in the port side. The suspension lines from the winch drum were passed through the respective pully and fastened to the copper sphere with affixed loop. The supply for the winch motor was connected through a double pole, double throw spring loaded switch which can change the polarity of the supply to the motor in turn the direction of the rotation of the cable drum. The winch control system was located in acoustic room. By observing the oscilloscope for the maximum echo signal level and the echo mark of the copper sphere on the echo-gram of the echosounder. Three suspension lines were either released or heaved to position the copper sphere to the centre of the beam. RESULTS AND DISCUSSION Values of the SL+VR obtained are given in Table 1. The value obtained during the year 1993 is considerably less. As the performance and other measurements on equipment parameters were satisfactory, the low value could be attributed to the non-alignment of the standard target with the axis of the beam due to underwater current. The calibration is carried out annually and or whenever some vital parts of the equipments such as transducer, transmitter-receiver printed circuit board etc are changed. The values of the SL + VR are documented so as to effect the correction in the estimation as and when required while carrying out acoustic survey for resources estimation and for the future reference. Calibration using standard target The voltage amplitude of the signal appearing at the output terminal of the receiver of an echo ranging system depends on the reflecting properties of the target, receiving sensitivity and transmitting power. When characteristics of the transmitter and the 502 Natarajan et al. Table 1 - Source level + voltage response value obtained during different calibra-tions onboard FORV Sugar Sampada using copper sphere as standard target (Diameter = 60 mm, TS = 33.6 dB) Echosounder - EX 400 Transducer No. 1 Date Power Attenuation setting (dB) 15.10.1984 07.09.1985 12.04.1990 to 14,04.1990 16.05.1992 to 20.5.1992 07.01.199.3 to 09.01.1993 High Low High Low High Low High Low High Low OdB 137.6 129.3 137.5 129.1 124.1 lOdB 128.1 119.3 128.1 119.3 124.1 20dB 118.1 109.6 118.1 109.6 114.1 30dB 108.1 097.7 108.1 077.9 104.2 136.9 126.9 116.9 106.9 130.1 120.1 110.1 100.1 111.5 101.5 091.5 081.5 receiver are known, the properties of the target could be judged from the amplitude and the shape of the echo signal received (Forbes & Nakken, 1972). For the measure-ment of the parameters of the transmitting and the receiving system, hydrophone is used. Hydrophone is very sensitive to external temperature. As the measurements are undertaken in the ambient condition, maintaining the constant temperature is not practicable. Hence, the precision in the measurement becomes poor. The method of measuring SL + VR using standard target do not involve the use of hydrophone and the inaccuracy caused by the instability of the hydrophone is avoided resulting improved precision in the measurement. Live fish calibration An echointegrator connected to the echosounder sums up the echo signals received. The output of the echointegrator per nautical mile covered is an index of the amount of fish recorded, and therefore a measure of relative density of fish in the area. The magnitude of the output of the integrator depends on the equipment parameters and the acoustic characteristic of the fish parameters, called calibration constant. This is established through live fish calibration by considering the integrator deflection for the insonified fish of the known species and quantities (Johanneson & Losse, 1977) and used for converting the relative biomass into absolute biomass. Calibration of instruments 503 Live fish calibration experiment was carried out onboard R V Rastrelliger and calibration constant was obtained for mackerel and sardine (Vittulo et al. 1980). As the type of instruments used onboard R V Rastrelliger are different from FORV Sagar Sampada, these constants cannot be used. Therefore to have the absolute biomass estimate of fishery resources, live fish calibration need be carried out onboard FORV Sagar Sampada in future for the commercially important species, following the methods of Vittulo etal. (1980). Calibrating integrator using trawl catch data Another method of establishing calibration constant, ' C used in fish resources estimation is by calibrating the integrators reading against the corresponding trawl catch (Anon. 1973). The calibration constant established onboard FORV Sagar Sampada based on above method was 1327 kg/n.mile /mm, which means if the vessel has sailed one nautical mile distance and integrator deflection is 1 mm then the fish biomass will be 1327 kg in that one square nautical mile area. However, this method may lead to under estimation of resources as it is assumed that the fishing efficiency is 100% which is not practicable. Target strength measurement The target strength (TS) of the underwater object is defined as ratio of the reflected sound intensity to the incident sound intensity at 1 m from the object expressed in decibels. The magnitude of TS offish relates to fish size, morphology, physiology and orientation (Johannesson, 1983). Target strength of 100% reflecting sphere (diameter 12 cm) is -30dB (Bodholt, 1970). The TS measured for the catfish (Anon. 1974) is as follows: Mean length (cm) Mean TS(dB) Fish (no/kg) 23 -40 11 33 -33.5 3.7 The TS informations help the fishery scientists to know the size of the fish while carrying out the survey and to preserve fish stock for optimum exploitation. Also the knowledge of the target strength of the fish concerned provides another independent means of estimating absolute biomass by the volume back-scattering method (Anon, 1973). This study could be carried out onboard FORV Sagar Sampada for all other commercially valued species utilising the existing equipments in future. Ofcourse with the additions of the latest generation of scientific echosounder ES 400 with the colour printer will give colour hard copy of echogram and size distribution diagram. The distribufion diagram will show number offish/weight offish in percentage on Y-axis and fish length or TS values on the X- axis. To sum up the conclusion the calibration need be carried out regularly once in a year or whenever any major part of the equipment are changed during the fair weather season and documented. Live fish 504 Natarajan el at. calibration and target strength measurement for the commercially important species need be attempted. ACKNOWLEDGEMENT Authors are thankful to the Director, CMFRI for the permission to present the paper. They are also grateful to Mr. Toorshwal, Simrad expert, Mr. Bo Lundgren and Mr. Morgen Sorensen, Danida experts and Dr. Srinivasan for their guidance and also for the master, FORV Sugar Sampada, fishing masters, Mr. Dinesh Babu, Norinco Service engineer and other scientific staff for rendering help during the different, calibration cruises. REFERENCES Anon. 1973. Answers to questionnaire, Financing agriculture Vol.V. No.2-3, July-October 1973. Anon. 1974. Survey results, 1972/73. UNDP/FAO Pelagic Fisheries Project (IND 69/593). Progress report No.6. Cochin Burgen,pp. 141. Bodholt, H. 1970. Measuring target strength and back-scattering strength SIMRAD Bulletin Nos. 5. Foote, K.G., Knudsen, H.P. & Vestnes, G. 1983. Standard calibration of echosounders and integrators with optimal copper sphere, Fisk Dr. Skr.Scr.Hav. Unders, 17: 335-346.' Forbes, S.T. & Nakken, 0.1972. Manual of methods for fisheries research survey and appraisal. Part 2 - The use of acoustic instruments for fish detection and abundance estimation. FAO. Man. Fish Sci. No. FIRM/MS: pp. 139. Johannesson, K.A. 1983. Fisheries acoustic. A practical manual for aquatic biomass estimation. FAO. Fish. Tech. Pap No 240: pp. 249. Johannesson, K.A. & Losse, G.P. 1977. Methodology of acoustic estimation of fish abundance in some UNDP/FAO resource survey project. Rep.P.v.Reun.CIEM, 170: 296-318. Vitullo, A.N., Natarajan, S. & Daniel, E., 1980. Live fish calibration of hydro-acoustic equipments onboard R.V. Rastrelliger, R: DP/IND/75/038 Field document Volume. 7 (FAO, Rome), pp.87. * * * 

Calibrations of hydro-acoustic instruments onboard FORV Sagar Sampada

http://eprints.cmfri.org.in/5229/1/52.pdf

Calibrations of hydro-acoustic instruments onboard FORV Sagar Sampada

Abstract

Similar works

Full text

Available Versions

CMFRI Digital Repository