The authors warmly thank Luc Morhain and Marc Wary (Arts et Métiers ParisTech CER Metz) for their technical support.Thixoforming of steels poses challenges due to the high temperatures involved and the lack of understanding of thermomechanical behavior. The volume fractions of the liquid and solid phases in the semi-solid state are the most important parameters for such a form-ing process, as they affect the viscosity and hence the flow behavior of the material. Two-dimensional observations might not always be sufficient, as the size distribution and the connectivity of phases cannot be obtained from associated measurements, which can only be determined by three-dimensional (3-D) investigation. This paper presents the first application of high-energy X-ray microtomography to the microstructure of steel in the semi-solid state. The microstructure of M2 high-speed tool steel was studied in both as-received and heated-and-quenched states. From the reconstructed images, 3-D information could be obtained and was compared with scanning elec-tron microscopy and energy dispersive spectrometry observations. The volume fraction and the location of liquid phase in the semi-solid state were determined in particular, and the continuous solid skeleton was investigated
