Fidler, Paul

Long, Peter

Middleton, Campbell

Stehle, John

Vardanega, Paul J

Webb, Graham

English

This paper presents a study of the constraints and challenges faced by the authors when invited to study the feasibility of developing a monitoring system to provide specific information sought by the designer and contractor during the construction of the new 225m high, 48 storey steel-framed Leadenhall Building, located at 122 Leadenhall Street in London. The original goal of the study was to develop a system to assist with the active alignment of the building during construction, a key aim being to determine if the diagonal bracing members were in tension or compression. Installing strain gauges directly onto the steel bracing members was not permitted due to concerns regarding the integrity of the intumescent paint coating. A laboratory study to investigate the ability to measure strain directly from the paint surface was undertaken. Aesthetic concerns also imposed further restrictions on what could be attached to the structure. This feasibility study did result in the development of a new wireless sensor to measure temperature and optionally strain. In order to allow the sensors to be unobtrusive they were designed to fit within holes already present in the steel sections, originally used for attaching lifting equipment during erection of the steel frame. This exploratory study demonstrates that such collaborations can yield outcomes which, while not originally envisaged, nevertheless have the potential to benefit the research organisation, the designer and the contractor. This paper demonstrates how a bespoke wireless sensor platform can be rapidly developed using existing technologies to fit the needs of an individual project. The potential for use on future construction projects of a similar nature is also highlighted and future research directions discussed

Explore Bristol Research

A Summary Review of Wireless Sensors and Sensor Networks for Structural Health Monitoring”, The Shock and Vibration Digest,

An introduction to structural health monitoring”,

An overview of wireless structural health monitoring for civil structures”,

Contiki - a lightweight and flexible operating system for tiny networked sensors”,

FatFs Module Application Note”.

Intergated Products Inc.

Limitations in Structural Identification of Large Construction Structures”,

Sensors for infrastructure assessment”,

Structural Health Monitoring of Bridges”,

Wireless Structural Health Monitoring at the Humber Bridge”. The

Construction monitoring constraints and challenges:A feasibility study

https://research-information.bris.ac.uk/files/32280260/SHMII_6_2013_PS06_06.pdf

Construction monitoring constraints and challenges:A feasibility study

Abstract

Similar works

Full text

Available Versions

Explore Bristol Research