Abstract

Mass fraction of nitrogen is very important pointer because the results of these measurements are often used for determination of protein mass fraction that is an important indicator of the quality of the vast majority of food products and raw materials, in particular dry milk powder. Proteins-enzymes catalyze chemical reactions, protein along with fats and carbohydrates is one of the indicators characterizing the energy value of food, so its definition is mandatory for all food products. The aim of this key comparison CCQM-K130 and pilot study P166 is to support National Measurement Institutes (NMIs) and Designated Institutes (DIs) to demonstrate the validity of the procedures the employed for determination of nitrogen mass fraction in glycine. The study material for this key comparison and pilot study has been selected to be representative as one of the aminoacid – the simplest part of the protein. Glycine is an amino acid, single acid that does not have any isomers (melting point –290 °C; specific heat of evaporation − 528,6 J/kg; specific melting heat − 981,1 J/kg; pKa − 2,34, molar mass - 75,07 g/mol, density - 1,607 g/cm3). Ural Scientific Research Institute for Metrology (UNIIM) acted as the coordinating laboratory of this comparison and pilot study. Eight NMIs participated in this key comparison and two NMIs participated in Pilot study. The results of Pilot study are excluded from the Report B.Fil: Medvedevskikh, Maria. Ural Scientific Research Institute for Metrology (UNIIM); RusiaFil: Jury, Bessonov. Ural Scientific Research Institute for Metrology (UNIIM); RusiaFil: Krasheninina, Maria. Ural Scientific Research Institute for Metrology (UNIIM); RusiaFil: Acco Garcia, Steve Ali. (INACAL); PerúFil: Haraldsson, Conny. SP Technical Research Institute of Sweden; SueciaFil: Rodriguez, M. Alejandra. Instituto Nacional de Tecnología Industrial (INTI); ArgentinaFil: Rodriguez, Gabriela. Instituto Nacional de Tecnología Industrial (INTI); ArgentinaFil: Salvo, Karino. Laboratorio Tecnológico del Uruguay (LATU); UruguayFil: Gavrilkin, Vladimir. (UkrCSM); UcraniaFil: Kulik, Sergey. (UkrCSM); UcraniaFil: Samuel, Laly. (MSL); Nueva ZelandaFil: do Rego, Eliane C. P. Instituto Nacional de Metrologia, Qualidade e Tecnologia (INMetro); BrasilFil: Wollinger, Wagner. Instituto Nacional de Metrologia, Qualidade e Tecnologia (INMetro); BrasilFil: Monteiro, Tânia M. Instituto Nacional de Metrologia, Qualidade e Tecnologia (INMetro); BrasilFil: de Carvalho, Lucas J. Instituto Nacional de Metrologia, Qualidade e Tecnologia (INMetro); Brasi

    Similar works