This paper presents study results on the effect of the addition of polymeric waste on selected mechanical properties (flexural and compressive strength) of cementitious composites with a special emphasis on cement mortars. This research focuses on cement mortars, commonly used in construction applications such as seaports and quays. Here, post-production waste from the production of automobile floor mats is ground to a fraction of 0–2 mm and used in the amounts of 5%, 7.5%, and 10% by weight of cement as an additive or substitute for sand. All the presented tests are conducted in accordance with PN-EN 197-1. The purpose of these tests is to determine the possibility of using thermoplastic waste as an aggregate substitute or additive in cement mortars. The conducted research confirmed the possibility of using the mentioned waste in cement mortar production technology in the amount of 5% as a substitute for sand
