Influence of Aluminium and Silicon Content on the Phase Composition, Microstructure and Magnetic and Mechanical Properties of Multicomponent FeNiCoAlSi Alloys
This work deals with the characterization of structure, magnetic and mechanical properties of (FeNiCo)100-x(AlSi)x (x = 0, 5, 10, 15, 25) multicomponent alloys prepared by casting. The results of X-ray diffraction measurements, scanning electron microscopy observations and hardness and magnetic properties investigations are presented. The studies show that cast (FeNiCo)100-x(AlSi)x alloys reveal dendritic morphology and their phase composition depends on (Al + Si) content. For x ≤ 10 a face-centered cubic phase is observed, while the increase of Al and Si content results in a body-centered cubic phase formation. It leads to a fivefold increase of hardness from 88 HV to 526 HV. The investigated alloys have high magnetic induction reaching 170 emu/g, while their coercivity value is even up to 2.9 kA/m for x = 15, and strongly depends on chemical and phase composition