Purpose: Light microscope with polarized light has been used for observation layered zone, visible thanks to polarization of the light, inside polymer-polymer composites and nanocomposites Aim of work has been concentrated on investigation of nanocomposites as promising engineering materials, basing on composition of polypropylene and montmorillonite as reinforcement in the shape of nanoparticles of 2:1 silicate. Design/methodology/approach: Conventional and non-conventional injection molding process has been used for obtaining nanocomposites. In non-conventional process has been used the special mold for inducing the shear rates, additionally equipped with external computer to control melt manipulation of solidifying polymer inside mold cavity Findings: Highly developed structure consisted of multilayer zone between skin and core mainly responsible for reinforcement and improvement of fracture toughness of polymer composites and nanocomposites Research limitations/implications: Nanocomposites of polymer blends and montmorillonite were moulded by direct injection moulding according to melt temperature and stroke time-number combination included in design of experiments. Practical implications: Application of special injection moulding technique provides to structure development and gives possibility to create multilayer zone, which strengthen material. Besides strengthening obtaining of such nanocomposites is cheap thanks to application of low cost injection moulding technique and not expensive polyolefines with developed structure, without using additional fillers (e.g. compatybilizers). Originality/value: Very wide application of polymer composites and nanocomposites as engineering materials used for various industries like building engineering, automotive and aerospace.- (undefined
