Alloy 22 is a nickel base alloy highly resistant to all forms of corrosion. In conditions where tight crevices exist in hot chloride containing solutions and at anodic potentials, Alloy 22 may suffer crevice corrosion, a form of localized attack. The occurrence (or not) of crevice corrosion in a given environment (e.g. salt concentration and temperature), is governed by the values of the critical potential (E{sub crit}) for crevice corrosion and the corrosion potential (E{sub corr}) that the alloy may establish in the studied environment. If E{sub corr} is equal or higher than E{sub crit}, crevice corrosion may be expected. In addition, it is generally accepted that as Alloy 22 becomes passive in a certain environment, its E{sub corr} increases and its corrosion rate (CR) decreases. This paper discusses the evolution of E{sub corr} and corrosion rate (CR) of creviced Alloy 22 specimens in six different mixtures of sodium chloride (NaCl) and potassium nitrate (KNO{sub 3}) at 100 C. The effect of immersion time on the value of E{sub crit} was also determined. Two types of specimens were used, polished as-welded (ASW) and as-welded plus solution heat-treated (ASW+SHT). The latter contained the black annealing oxide film on the surface. Results show that, as the immersion time increases, E{sub corr} increased and the CR decreased. Even for highly concentrated brine solutions at 100 C the CR was < 30 nm/year after more than 250 days immersion. Some of the exposed specimens (mainly the SHT specimens) suffered crevice corrosion at the open circuit potential in the naturally aerated brines. Immersion times of over 250 days did not reduce the resistance of Alloy 22 to localized corrosion
