The US Department of Energy Office of High Energy Physics has recently approved a Muon Accelerator Program (MAP). The primary goal of this effort is to deliver a Design Feasibility Study for a Muon Collider after a 7 year R&amp;D program. This paper presents a brief physics motivation for, and the description of, a Muon Collider facility and then gives an overview of the program. I will then describe in some detail the primary components of the effort

Bross, Alan D.

UNT Digital Library

The US Muon Accelerator Program (MAP)Alan D. Bross1Fermi National Accelerator Laboratory, P.O. Box 500, Batavia, IL 60510 USAAbstract. The US Department of Energy Office of High Energy Physics has recently approved a Muon Accelerator Program(MAP). The primary goal of this effort is to deliver a Design Feasibility Study for a Muon Collider after a 7 year R&Dprogram. This paper presents a brief physics motivation for, and the description of, a Muon Collider facility and then gives anoverview of the program. I will then describe in some detail the primary components of the effort.Keywords: muon collider, neutrino factoryPACS: 29.20.-cPHYSICS AT A MUON ACCELERATORFACILITYThe physics potential of a high-energy lepton collider hasbeen understudy for many years [1] [2] and there is astrong case to made that in order to fully exploit newphysics discoveries at the LHC, a mult-TeV lepton col-lider will be needed. A multi-TeV lepton collider willnot only allow experimenters to access higher mass su-persymmetric particles, but can shed detailed insight intothe understanding of the mechanism behind mass gener-ation and electroweak symmetry breaking, while reach-ing beyond the capabilities of the LHC with respect tothe search for evidence for extra dimensions or quantumgravity. In addition, the ability to make precision mea-surements of standard model processes will open win-dows on physics at energy scales beyond our direct reach.An example of the extended reach of a multi-TeV lep-ton collider comes from the 2004 CLIC physics study[3], Fig. 1. This figure illustrates the number of super-symmetric particles observable at various colliders (theLHC + e+e− machines with center of mass energy upto 3 TeV) under a number of benchmark supersymmet-ric scenarios. The extended reach of a multi-TeV leptoncollider is clear.The Muon Collider (MC) provides a possible realiza-tion of a multi-TeV lepton collider, and hence a way toexplore territory beyond the reach of the LHC. A muonaccelerator facility also presents the opportunity to ex-plore new physics within in a number of programs. Aschematic that shows the evolution of a muon accel-erator complex which ultimately reaches a multi-TeVMuon Collider [4] is shown schematically in Fig. 2.The front-end of the facility provides an intense muonsource that can perhaps support both an energy-frontier1 For the Neutrino Factory and Muon Collider CollaborationFIGURE 1. Bar graphs of the number of supersymmetricparticles observable at different colliders and under differentsupersymmetry scenarios. See [3] for details.Muon Collider and a Neutrino Factory. The muon sourceis designed to deliver O1021 low energy muons per yearwithin the acceptance of the accelerator system, and con-sists of (i) a multi-MW proton source delivering a multi-GeV proton beam onto a liquid Mercury pion productiontarget, (ii) a high-field target solenoid that radially con-fines the secondary charged pions, (iii) a long solenoidalchannel in which the pions decay to produce positiveand negative muons, (iv) a system of RF cavities in asolenoidal channel that capture the muons in bunchesand reduce their energy spread (phase rotation), and (v) amuon ionization cooling channel that reduces the trans-verse phase space occupied by the beam by a factor of afew in each transverse direction. At this point the beamwill fit within the acceptance of an accelerator for a Neu-trino Factory. However, to obtain sufficient luminosity,a Muon Collider requires a great deal more muon cool-FERMILAB-CONF-10-545-APCOperated by Fermi Research Alliance, LLC under Contract No. DE-AC02-07CH11359 with the United States Department of Energy. FIGURE 2. Schematic of a Muon Accelerator Facility.ing. In particular, the 6D phase-space must be reduced byO106, which requires a longer and more complex cool-ing channel. Finally after the cooling channel, the muonsare accelerated to the desired energy and injected into adecay (NF) or storage ring (MC). In a Neutrino Factory,the ring has long straight sections in which the neutrinobeam is formed by the decaying muons. In a Muon Col-lider, positive and negative muons are injected in oppo-site directions and collide for about 1000 turns before theluminosity becomes marginalized due to muon decays.Low-energy muon physicsFrom the description given above, it is clear that amuon accelerator facility that can produce (and manip-ulate) ultra-intense beams of muons can provide excitingopportunities for many physics programs: low-energy µphysics, neutrino oscillation physics and physics at theenergy frontier. In this section I will elaborate briefly onwhat is possible at this facility with respect to low-energyµ physics.One of the first physics programs that a muon ac-celerator facility could support would be sensitive testsof charged lepton flavor violation (cLFV), such as whatcould be explored with a µ → e conversion experiment.In the Standard Model this process occurs via ν mixing,but the rate is well below what is experimentally acces-sible. The rate (or limit on the rate) of this process putsvery stringent constraints on physics beyond the Stan-dard Model. For example, supersymmetric models pre-dict the rate to be O 10−15. The low-energy muon sourceof the muon accelerator facility provides a potential up-grade path for the next round of cLFV experiments cur-rently being planned. Manipulation of the 6D emittanceof the low-energy muon beam can produce a beam thathas much higher stopping power in the target of the ex-periment. Fig. 3 shows the evolution of the momentumof a muon beam as it progresses down through sectionsof a helical cooling channel (HCC) [5]. This upgradepath could extend the sensitivity of these experiments byupwards of two orders of magnitude, exploring a massreach to 4×104 TeV.FIGURE 3. Evolution of the µ momentum spread from thestart of a HCC (z=0) through a series of sections ending atz=6.4 m.The Energy FrontierAs mentioned above, the Muon Collider could be thefinal step in the evolutionary process of the muon accel-erator facility and it provides a very attractive possibilityfor studying the details of Terascale physics after the ini-tial running of the LHC. The Muon Collider can studythe same physics that electron-positron linear collidersaddress, but compared to these machines, a Muon Col-lider presents a very small footprint. It can easily fit onthe Fermilab site (see Fig. 4), for example, and containsfewer complex components as a result. In addition, MuonColliders may have a special role for precision measure-ments in that the machine potentially has a very smallbeam energy spread and thus allows for very precise en-ergy scans. The beamstrahlung that exists at multi-TeVelectron-positron linear colliders can limit their ultimateprecision in this regard. This is illustrated in Fig. 5 [6].THE MUON ACCELERATORPROGRAMFollowing over a decade of R&D on Neutrino Factoriesand Muon Colliders, the US Neutrino Factory and MuonCollider Collaboration [7] and the Fermilab Muon Col-lider Task Force [8] jointly proposed a 7 year, roughly$120M R&D program to the US Department of Energy.This proposal is aimed at completing a Design Feasibil-ity Study (DFS) for a Muon Collider and, with interna-tional participation, a Reference Design Report (RDR)for a muon-based Neutrino Factory. The goal of the R&Dprogram is to provide the HEP community with detailedFIGURE 4. Muon Collider conceptual layout on the Fermi-lab site.FIGURE 5. Representative energy-scan resolution for a 3TeV Z′ at representative machines.information on future facilities based on intense beamsof muons and give clear answers to questions regard-ing the expected capabilities and performance of thesemuon-based facilities. Providing defensible estimates fortheir cost is also to be part of the effort. This informa-tion, together with the physics insights gained from thenext-generation neutrino and LHC experiments, will al-low the HEP community to make well-informed deci-sions regarding the optimal choice for any new facility.The proposal was reviewed in August of 2010 andwas endorsed by an international review panel. The com-mittee stated that the Muon Collider was a significantand important option for the world-wide High EnergyPhysics community and that a strategy that is based ona staged approach should be considered.Program componentsThe primary deliverables of MAP are enumerated be-low and described in some detail:1. A Design Feasibility Study report (DFS) for a multi-TeV MC including an end-to-end simulation ofthe MC accelerator complex using demonstrated,or likely soon-to-be-demonstrated, technologies, anindicative cost range, and an identification of furthertechnology R&D that should be pursued to improvethe performance and/or the cost effectiveness of thedesign.2. Technology development and system tests that areneeded to inform the Muon Collider DFS, and en-able an initial down-selection of candidate tech-nologies for the required ionization cooling and ac-celeration systems.3. Contributions to the International Neutrino FactoryDesign Study (IDS-NF) to produce a Reference De-sign Report (RDR) for a NF by 2014. The empha-sis of the proposed U.S. participation is on: a) de-sign, simulation and cost estimates for those parts ofthe NF front-end that are (or could be) in commonwith a MC; b) studying how the evolving Fermilabproton source can be used for the Neutrino FactoryRDR design; and c) studying how the resulting NFwould fit on the Fermilab siteThe two major deliverables (Muon Collider DFS andthe Neutrino Factory RDR) are certainly paramount inthat they will form the basis of the technical argument forthese facilities. Looking at the individual sub-systems inthese facilities, we can project where the Muon Accel-erator Program will take the state-of-the-art with respectto these systems. Fig. 6 indicates where we believe eachof the subsystems will be technically after this 7 yeareffort. In Fig. 6 level 7 (Muon Collider Proposal) rep-resents the technical maturity (and understanding of thecost) needed in order to propose building the facility.A separate physics and detector study (not part of theMuon Accelerator Program) will also be carried out inparallel with MAP. Initially, the physics case will be re-fined, benchmark processes with be defined, examinationof the collision point environment will be done and basicdetector performance criteria will be established so thatthe machine capabilities as a function of energy and lu-minosity of the collider can be determined. Close coordi-nation between MAP and the Muon Collider physics anddetector study will be facilitated by a Machine-DetectorInterface working group within MAP. In parallel duringthe last 3 to 4 years of MAP, the physics and detectorstudy will be devoted to detailed physics studies, includ-ing more complete detector simulations. In this period,comparisons with other possible facilities, such as CLICFIGURE 6. Sub-system technical progress after the 7 yearMAP.will also be carried out.Work has already progressed on the understanding ofthe Muon Collider detector backgrounds [9]. From stud-ies done over a decade ago, it was known that there werelarge backgrounds in the inner detectors from decay elec-trons. New studies that advance a shielding strategy of“electron-sweeping” upstream of the IP and optimizationof a high-Z cone (a 10o W cone is used in the current sim-ulations) near the IP have shown very good results. Fig.8 shows the dose rate near the IP from a MARS [10] sim-ulation of a 1.5 TeV center-of-mass Muon Collider. Thetotal dose is approximately 12 that which would be seenat the LHC operating at a luminosity of 1034.Muon Collider OptionsDetails regarding the basic design concepts for theMuon Collider are given in Fig. 7. As can be seenfrom this schematic, currently there are many options forthe 6D muon ionization cooling and arguably the mostcrucial aspect of MAP is to efficiently carry out the initialphases of the cooling R&D so that, as indicated in item 2above, down-selection of candidate technologies can beaccomplished early in the program.CONCLUSIONSA Muon Accelerator Program proposal has been ap-proved by the US Department of Energy Office of HighEnergy Physics. The physics case for this type of facil-ity has been well established and we now have the op-FIGURE 7. Sub-system options for the Muon Collider that are currently under study.FIGURE 8. Total dose in the silicon detector at a 1.5 TeVCOM Muon Collider.portunity to understand, in detail, its technical feasibil-ity and cost. Delivering a Design Feasibility Study for aMuon Collider to the High Energy Physics communityby around 2016 is the program’s highest priority.ACKNOWLEDGMENTSI would like to thank all my colleagues in the NeutrinoFactory and Muon Collider Collaboration and the Fermi-lab Muon Collider Task Force for all their support overthe years and to acknowledge their amazing accomplish-ments over the past decade as we enter a new phase ofour endeavor.REFERENCES1. J. Brau et al. [ILC Collaboration], arXiv:0712.1950[physics.acc-ph].2. J. P. Delahaye et al. [CLIC Study Group], in Proc. of the20th Intl. Linac Conference LINAC 2000 ed. AlexanderW. Chao, In the Proceedings of 20th International LinearAccelerator Conference (LINAC00), Monterey, California,21-25 Aug 2000, pp MO201 [arXiv:physics/0008064].3. E. Accomando et al. [CLIC Physics Working Group],arXiv:hep-ph/0412251.4. M. Alsharo’a et al., (Muon Collider Collaboration), Phys.Rev. ST Accel. Beams, 6 081001 (2003).5. M. A. C. Cummings, R. P. Johnson, C. M. Ankenbrandtand K. Yonehara, In the Proceedings of ParticleAccelerator Conference (PAC 07), Albuquerque, NewMexico, 25-29 Jun 2007, pp 2933.6. E. Eichten, "Toward a MultiTeV Muon Collider: ThePhysics Case", Invited colloquium, Rutherford AppletonLaboratory, September 23, 2010.7. See: http://www.cap.bnl.gov/mumu/8. See: http://apc.fnal.gov/groups2/MCCC/9. Y. I. Alexahin, E. Gianfelice-Wendt, V. V. Kashikhin,N. V. Mokhov, A. V. Zlobin and V. Y. Alexakhin[Neutrino Factory and Muon Collider Collaboration], Inthe Proceedings of 1st International Particle AcceleratorConference: IPAC’10, Kyoto, Japan, 23-28 May 2010, ppTUPEB022.10. N. V. Mokhov, “Status of MARS code,” FERMILAB-CONF-03-053.

The US Muon Accelerator Program (MAP)

Abstract

Similar works

Full text

Available Versions

UNT Digital Library