PZT-NICKEL FERRITE AND PZT-COBALT FERRITE COMPARATIVE STUDY: STRUCTURE, DIELECTRIC, FERROELECTRIC AND MAGNETIC PROPERTIES OF COMPOSITE CERAMICS

Abstract

Multiferroic (MF) materials with simultaneous magnetic and electric long range order and occasionally, mutual magnetoelectric (ME) coupling, have recently attracted considerable interest. These compounds present opportunities for potential applications in information storage, the emerging field of spintronics, sensors, and multistate memory devices [1]. The ME phenomenon is observed in both single- phase as well as composite materials. The challenge in preparing such materials is to find equilibrium ferroelectric and magnetic structures preserving both properties close to the room temperature [2]. The individual phases (Ni0.7Zn0.3Fe2O4, CoFe2O4 and PbZr0.52Ti0.48O3) were prepared by citrate-nitrate combustion reaction method. Composites were prepared by mixing and homogenizing PZT and NZF/CF powders in a planetary ball mill in the ratio: (x) PZT + (1-x) CF/NZF (x = 0.8 and 0.9). XRD diagrams of a sintered composite confirm the presence of only two phases, ferroelectric PZT phase and ferrite phase. SEM analysis revealed a uniform grain arrangement of both phases. Similar values of saturation magnetization (Ms) for both types of composites were observed. Ms increases with increasing magnetic phase, as it was expected. Significantly higher values of coercive field (HC) can be seen in the composite with a cobalt-ferrite, which belongs to the group of hard ferrite unlike NZF which is soft ferrite and characterized by low values of coercive field. The ferroelectric properties of all ceramic composites were also studied