Process and tool condition monitoring systems are a prerequisite for autonomous production. For online monitoring, it is the state of the art to use reference signals of correct processes to improve failure sensitivity and reduce false alarms. Transferring these reference signals from other machines economizes on teach-in processes and complex simulations. However, the varying behaviour of the two machines leads to differences that need to be considered for the transfer. This work aims to identify similarities and differences in the timing and positioning of multiple machines when executing identical machining instructions. A comparison of process signals quantifies similarities and differences among machines. Results describe differences between process sequences, rapid traverse speeds, rapid traverse paths, machining feed speeds, machining feed paths, tool engagement time, and the temporal alignment of signals. Differences primarily originated from different control parameters and strategies as well as physical drive limitations. During machining differences occurred most frequently when axes were accelerated. Differences accumulated over prolong periods of machining and eventually became relevant from the perspective of online monitoring
