The Effect of Layer Thickness on the Reflectance of a Quasi One-Dimensional Composite Built with Zr55Cu30Ni5Al10 Amorphous Alloy and Epoxy Resin

Abstract

The study examined the impact of the angle of incidence of mechanical waves on various types of quasi one-dimensional superlattice. Binary periodic structure, quasi-periodic distribution of Thue-Morse layers and Severin’s aperiodic multilayer were used. Using the concatenation and recursive rules, the distribution of layers was determined for individual structure types for generation numbers equal to 3, 4 and 5. The structures were selected so that the thickness of the composite was the same for each type of distribution for a given generation number value. Transfer Matrix Method algorithm was used to determine reflectance. The band structure of reflectance has been demonstrated for incidence angles up to 90 degrees at mechanical wave frequencies up to 50 kHz. The existence of wide bands of high reflectance above the acoustic frequencies was demonstrated for the analyzed structures. Increasing the layer thickness caused an inhomogeneous shifts of transmission peaks towards lower frequencies