Ali, Mubasher

Liao, Wei-Hsin

Lin, Feng

Su, Zhou

Tan, Yuanfu

Wong, Hay

Spot size is an important parameter of the laser, which not only represents the resolution of laser, but is also involved in the calculation of other parameters. Nowadays, CCD imaging systems, scanning imaging systems, and other sensors are used to measure the laser spot size. But they are all lacking flexibility when measuring the spot size in different locations, not to mention their high cost. In this study, a new spot size measurement device based on laser back-injection interferometry was presented. The photodiode integrated with the laser diode was used to collect the feedback laser, then the laser spot size was calculated by the feedback current. A commercial CCD imaging system was used to provide the laser spot size as a reference. Results show that our spot size measurement device could measure the spot size (Full Width Half Maximum) of 5 laser diode modules both in the x (Gaussian-like profile) and y (top-hat-like profile) direction through scanning-slit. Though there are variations between the scanning-slit results and spot sizes from the CCD imaging system due to the diffuse and specular reflection, the accuracy of the spot size measurement device ranges from 96.07 % to 99.46 %, which proves the reliability of our device. It is believed that our device could provide an alternate method for laser spot size measurement, which is cost-effective, easy to operate, and accurate

University of Liverpool Repository

Study on laser spot size measurement by scanning-slit method based on back-injection interferometry

http://livrepository.liverpool.ac.uk/3177645/1/Revised%20manuscript%20with%20changes%20marked.docx

Study on laser spot size measurement by scanning-slit method based on back-injection interferometry

Abstract

Similar works

Full text

Available Versions

University of Liverpool Repository