Blank, D.H.A.

Janssens, J.A.

Noheda, B.

Rijnders, G.

Vlooswijk, A.

English

NARCIS 

Crossover from 180-to-90 degree domains in ferroelectric thin films

University of Twente Research Information

Crossover from 180-to-90 degree domains in ferroelectric thin films A. Vlooswijk1, A. Janssens2, G. Rijnders2, D. Blank2, B. Noheda1 1University of Groningen, Laboratory of Solid-State Chemistry 2University of Twente, Inorganic Materials Science Group, The Netherlands  We have grown thin films of the classical tetragonal perovskite ferroelectric PbTiO3 on DyScO3 substrates. Due to the minuscule mismatch between PbTiO3 and DyScO3 at the growth temperature (< 0, 4% at 570◦C), high-quality paraelectric thin films can be grown, in which periodic ferroelectric domains form upon cooling down. The thinnest of these films (d< 8nm) display 180◦ periodic domains due to the large depolarizing fields, whereas the thicker films (d> 28nm) consist of 90˚ domain patterns determined by the elastic energy. For intermediate thicknesses, we have observed for the first time the crossover from 180˚-to-90˚domain walls. For this crossover, we propose a model that combines the elastic and electrical boundary conditions, giving rise to ferroelectric closure-like domains.  The observed domain periodicity (Λ) versus film thickness (d) correlation, has revealed the energetics of domain wall formation. For d< 8nm, 180domains form with periodicity in accordance with Kittel’s Law applied to ferroelectric domains (Λ~d1/2). Taking into account that during the cooling process, the domain walls can ’freeze in’[2], we have measured up to T=200˚C and did not observe any changes, showing that the 180˚ domain ’freezing’ occurs above this temperature. Fitting the vs. d data provides domain wall energy between 120 and 132mJ/m2 for freezing temperatures (Tf ) between 200◦and 440◦C, respectively, which is in good agreement with ab initio calculations for free-standing PbTiO3 [1].  The 90˚ domains in thicker films (d> 28nm), obey Roytburd’s Law for 90˚ domains, with the same d1/2 dependence and domain wall formation energy between 10 (Tf = 440◦C) and 65mJ/m2 (Tf =25◦C). Therefore, 90˚ domain walls are likely to be mobile down to room temperature [4]. This result, which is in good agreement with ab initio calculations [1] for freestanding PbTiO3, is somewhat surprising for epitaxially grown films and is most likely due to the elastic properties of DyScO3 [3].  [1]  B. Meyer and D. Vanderbilt, Phys. Rev. B 65(10), 104111 (2002).  [2]  M.L. Mulvihill et al., J. Am. Ceram. Soc. 80(6), 1462-68 (1997).  [3]  S. Venkatesan et al., J. Appl. Phys. 102(10), 104105 (2007).  [4]  A.H.G. Vlooswijk et al., Appl. Phys. Lett. 91(11), 112901 (2007).  P2.19 Tuesday, 2:45 pm127

Crossover from 180-to-90 degree domains in ferroelectric thin films

Abstract

Similar works

Full text

Available Versions

NARCIS

University of Twente Research Information