This project focused on the study and design of an interface for remote audio processing, with the objective of acquiring by filtering, biasing, and amplifying an analog
signal before digitizing it by means of two MCP3208 ADCs to achieve a 24-bit resolution signal. The resulting digital signal was then transmitted to a Raspberry Pi
using SPI protocol, where it was processed by a Flask server that could be accessed
from both local and remote networks.
The design of the PCB was a critical component of the project, as it had to accommodate various components and ensure accurate signal acquisition and transmission.
The PCB design was created using KiCad software, which allowed for the precise
placement and routing of all components. A major challenge in the design of the interface was to ensure that the analog signal was not distorted during acquisition and
amplification. This was achieved through careful selection of amplifier components
and using high-pass and low-pass filters to remove any unwanted noise.
Once the analog signal was acquired and digitized, the resulting digital signal was
transmitted to the Raspberry Pi using SPI protocol. The Raspberry Pi acted as
the host for a Flask server, which could be accessed from local and remote networks
using a web browser. The Flask server allowed for the processing of the digital signal
and provided a user interface for controlling the gain and filtering parameters of the
analog signal. This enabled the user to adjust the signal parameters to suit their
specific requirements, making the interface highly flexible and adaptable to a variety
of audio processing applications.
The final interface was capable of remote audio processing, making it highly useful
in scenarios where the audio signal needed to be acquired and processed in a location
separate from the user. For example, it could be used in a recording studio, where the
audio signal from the microphone could be remotely processed using the interface.
The gain and filtering parameters could be adjusted in real-time, allowing the sound
engineer to fine-tune the audio signal to produce the desired recording.
In conclusion, the project demonstrated the feasibility and potential benefits of
using a remote audio processing system for various applications. The design of the
PCB, selection of components, and use of the Flask server enabled the creation of
an interface that was highly flexible, accurate, and adaptable to a variety of audio
processing requirements. Overall, the project represents a significant step forward
in the field of remote audio processing, with the potential to benefit many different
applications in the future
