The LHC collider will be composed of approximately 1700 main ring superconducting magnets cooled to 1.9 K in pressurised superfluid helium and supported within their cryostats on low heat in-leak column-type supports. The precise positioning of the heavy magnets and the stringent thermal budgets imposed by the machine cryogenic system, require a sound thermo-mechanical design of the support system. Each support is composed of a main tubular thin-walled structure in glass-fibre reinforced epoxy resin, with its top part interfaced to the magnet at 1.9 K and its bottom part mounted onto the cryostat vacuum vessel at 293 K. In order to reduce the conduction heat in-leak at 1.9 K, each support mounts two heat intercepts at intermediate locations on the column, both actively cooled by cryogenic lines carrying helium gas at 4.5-10 K and 50-65 K. The need to assess the thermal performance of the supports has lead to setting up a dedicated test set-up for precision heat load measurements on prototype supports. This paper presents the thermal design of the support system of the LHC arc magnets. The results of the thermal tests of a prototype support made in industry are illustrated and discussed. A mathematical model has been set up and refined by the comparison with test results, with the scope of extrapolating the observed thermal performance to different geometrical and material parameters. Finally, the calculated estimate of the heat load budgets of the support system and their contribution to the total cryogenic budget for an LHC arc are presented
