Simultaneous Localization and Mapping (SLAM) is a decades-old problem. The classical solution to this problem utilizes entities such as feature points that cannot facilitate the interactions between a robot and its environment (e.g., grabbing objects). Recent advances in deep learning have paved the way to accurately detect objects in the image under various illumination conditions and occlusions. This led to the emergence of object-level solutions to the SLAM problem. Current object-level methods depend on an initial solution using classical approaches and assume that errors are Gaussian. This research develops a standalone solution to object-level SLAM that integrates the data from a monocular camera and an IMU (available in low-end devices) using Rao Blackwellized Particle Filter (RBPF). RBPF does not assume Gaussian distribution for the error; thus, it can handle a variety of scenarios (such as when a symmetrical object with pose ambiguities is encountered). The developed method utilizes shape instead of texture; therefore, texture-less objects can be incorporated into the solution. In the particle weighing process, a new method is developed that utilizes the Intersection over the Union (IoU) area of the observed and projected boundaries of the object that does not require point-to-point correspondence. Thus, it is not prone to false data correspondences. Landmark initialization is another important challenge for object-level SLAM. In the state-of-the-art delayed initialization, the trajectory estimation only relies on the motion model provided by IMU mechanization (during the initialization), leading to large errors. In this thesis, two novel undelayed initializations are developed. One relies only on a monocular camera and IMU, and the other utilizes an ultrasonic rangefinder as well. The developed object-level SLAM is tested using wheeled robots and handheld devices, and an error (in the position) of 4.1 to 13.1 cm (0.005 to 0.028 of the total path length) has been obtained through extensive experiments using only a single object. These experiments are conducted in different indoor environments under different conditions (e.g. illumination). Further, it is shown that undelayed initialization using an ultrasonic sensor can reduce the algorithm's runtime by half
