Cornelissen, Kamiel

de Boer, Jan

Hulsman, Marc

Papenburg, Bernke

Post, Gerhard F.

Reinders, Marcel J.T.

Stamatialis, Dimitrios

Truckenmüller, Roman K.

Uetz, Marc

Unadkat, Hemant V.

van Blitterswijk, Clemens

English

High throughput biomaterials screening largely remains unexplored. The present study was an attempt to explore the area of high throughput as well as high content screening of cell surface topographic interaction. An array of surface topographies called TopoChip was fabricated using a widely used polymer in tissue engineering, Poly (DL-lactic acid). The topographies were subsequently screened for their mitogenic effect on cells. We were able to detect topographic parameters responsible for mitogenic effect of surface topographies

University of Twente Research Information

HIGH-THROUGHPUT SCREENING OF CELL-SURFACE TOPOGRAPHIC INTERACTIONSHemant V. Unadkat1*, Marc Hulsman4, Kamiel Cornelissen2, Bernke Papenburg3,Roman K. Truckenmüller1, Gerhard F. Post2, Marc Uetz2, Marcel JT Reinders4,Dimitrios Stamatialis3, Clemens van Blitterswijk1, Jan de Boer11 MIRA Research Institute, Department of Tissue Regeneration, 2Discrete Mathematics and Mathematical Programming, 3Membrane Science and Technology Group, University of Twente, Postbus 217, 7500 AE Enschede, The Netherlands 4Delft Bioinformatics Lab, Delft University of Technology, Mekelweg 4, Delft, the Netherlands  ABSTRACT High throughput biomaterials screening largely remains unexplored. The present study was an attempt to explore the area of high throughput as well as high content screening of cell surface topographic interaction. An array of surface to-pographies called TopoChip was fabricated using a widely used polymer in tissue engineering, Poly (DL-lactic acid). The topographies were subsequently screened for their mitogenic effect on cells. We were able to detect topographic pa-rameters responsible for mitogenic effect of surface topographies.  KEYWORDS: Biomaterials, High-throughput screening, micro- nanotopographies, cell behavior  INTRODUCTION Biomaterials are used in a wide range of clinical applications. In case of implantable biomaterials the response of the human body depends on the cell-material interface resulting in either proper integration or rejection of the implant. Un-fortunately nature does not prescribe an optimal surface topography for a given biomedical application1. Here we per-form high throughput screening of surface topographies using the TopoChip platform to extract, influential topographi-cal parameters. Following iterative in vitro and in silico processes, topographies can be optimized and transferred onto implant surfaces for clinical applications. In the present paper we present topographies that can be used to enhance proli-feration of human mesenchymal stem cells.  MATERIALS AND METHODS Topographies were designed using randomized algorithms and physically fabricated on a 2 cm X 2 cm area of a sili-con master using photolithography and etching. Hot embossing of Polylactic acid (PLA) sheets was performed using an Obducat Hot embossing/Nano Imprint tool (Obducat AB, Sweden) (Figure 1). 2178 variations in surface topographies each in a area of 290 m X 290 m square area referred to as a TopoUnit were distributed across the TopoChip. Each TopoUnit was repeated twice and finally 4356 TopoUnits constituted a TopoChip. Chips were placed in a custom designed chip carrier (Figure 3) and EDU-treated 1.2 million/ml human mesenchym-al stem cells (hMSC) were seeded onto this chip. The cells were cultured for 8hrs and stained for proliferation (EDU de-tection) and nuclear stain (TOTO-3) following manufacturer’s protocol.   The chips were imaged using a BD Pathway 435 system with a custom designed macro and the acquired images were subsequently corrected for background, rotation and overlap. The resultant crop images for individual TopoUnits were analyzed using a CellProfiler2 pipeline which involved detection of nuclei (Toto-3 image), detection of proliferating nuclei (EDU/Alexa 488 image), subsequently these two were related and distributed into two bins for proliferating and non proliferating cells. A total of 5 chips were analyzed.   978-0-9798064-3-8/µTAS 2010/$20©2010 CBMS 2083 14th International Conference onMiniaturized Systems for Chemistry and Life Sciences3 - 7 October 2010, Groningen, The Netherlands RESULTS AND DISCUSSION We found specific physical topographies that enhance proliferation of the cells. We next used the experimental data to extract influential parameters from each topographical feature. For this, a classifier algorithm was trained on the data, to distinguish between units with high and low measurements (e.g. units with a high or low proliferation ratio). By com-paring the 10% highest versus 10% lowest measurements, the classifier was tested using a cross validation strategy giv-ing an estimate of the predictive power of the topographical features. Using this in silico approach, we found specific in-fluential parameters (i.e. size of the features) which strongly correlate with experimental results.  We propose that building an evolutionary iterative process between in vitro and in silico experiments shall result in a powerful approach for designing optimal biomaterial interface with wide applications in regenerative medicine or medi-cal devices.   CONCLUSION We have been able to show that it is possible to perform high throughput as well as high content screening of cell surface topographic interactions. ACKNOWLEDGEMENTS The authors would like to thank Mr. Sip Jan Boorsma and Mr. Dominic Post for help with fabrication of the chip carrier. HVU would like to acknowledge the Marie Curie JOIN(ed)T program for the generous grant. 2084Page intentionally left blank  2085

High-throughput screening of cell-surface topographic interactions

https://ris.utwente.nl/ws/files/99406800/Unadkat2010high_throughput.pdf

High-throughput screening of cell-surface topographic interactions

Abstract

Similar works

Full text

Available Versions

University of Twente Research Information