CALCIO GAUDINO, Emanuela

Cravotto, Giancarlo

Daniele, Crudo

Galina, Telysheva

Gerhard, Schories

Grillo, Giorgio

Liga, Lauberte

Ochoa-Gómez, José R.

Thomas, Dreyer

English

Institutional Research Information System University of Turin

        PA 27 High-intensity ultrasound and hydrodynamic cavitation as powerful treatment for biomass conversion  Emanuela Calcio Gaudino,a Giorgio Grillo,a Giancarlo Cravotto,a Daniele Crudob, Thomas Dreyerc, Gerhard Schoriesd, Liga Laubertee, Galina Telyshevae,  José R. Ochoa-Gómezf. a Department of Drug Science and Technology, University of Turin, 10125 Turin - Italy b E-PIC S.r.l. 13888 Mongrando (BI) - Italy  c Weber Ultrasonics AG, 76307 Karlsbad - Germany d TTZ Bremerhaven, 27572 Bremerhaven - Germany e Latvian State Institute of Wood Chemistry, 1006 Riga - Latvia f TECNALIA, Parque Tecnológico de Álava, 01510 Miñano, Araba-Spain  1. Introduction  Agro-industry residues generated as wastes during or after processing of agricultural crops are the main resource of lignocellulosic feedstocks available in huge amounts. Delignification is a primary step for further biomass fermentation to biofuels or conversion to fine chemicals. High-intensity ultrasound 1  (US) and hydrodynamic cavitation2 (HC) have been used as powerful pretreatment for a full valorization of biomass. Due to their peculiar mechanisms, cavitational treatments gives effective lignocellulosic matrix dismantling and delignification at low temperature (35-50°C). Cavitation also causes decrystallization of cellulose due to partial depolymerization. Within the H2020 project US4GreenChem starting from lab scale investigation, new protocols and equipment features have been designed for lignocellulosic bomass pre-tratment, with the aim to enhance the efficiency of enzymatic hydrolysis of cellulose and lignin recovery.  2. Experimental  Wheat straw (Triticum aestivium) was used as raw material (original lignin content 21%, and particle size <0.2) for both pre-treatments: 1) HC pre-treatment (30 min) was performed in a rotor-stator reactor ROTOCAV (E-PIC S.r.l.) that works in loop mode at 3000 rpm, with 0.4 Kg of raw material. The pre-treatment was performed at 50°C in NaOH solutions (5-10 wt% on dry biomass) with solid/liquid ratio = 1:50. 2) High-intensity US pre-treatment (30, 60, 90, 120 min) was performed in a multi-frequency reactor (WEBER Ultrasonics GmbH) (working both in batch and flow mode) using different frequencies (25, 80 or 120 kHz). The pre-treatment was performed at 35°C treating from 2 g to 2 kg of wheat straw in NaOH solutions (10 wt% on dry biomass) with solid/liquid ratio = 1:20.   The pre-treated mixtures were filtered and both liquid and solid fractions were recovered after neutralization. Analysis of individual phenolic compounds on liquid fractions were performed on ACQUITY UPLC H-Class system coupled to SYNAPT G2-Si High Definition Mass Spectrometer.   3. Results and discussion  Because of its high content of cellulose, wheat straw is a good raw material for ethanol production. For the bioconversion of lignocellulosic materials to ethanol, pretreatment of the material prior to enzymatic hydrolysis is essential to obtain high overall yields of sugar and ethanol.3 In this work, both US and HC treatments showed an ability to effectively disrupt the lignocellulosic matrix of wheat straw and maximize sugars yields in the following enzymatic hydrolysis performed with improved enzyme pools at Teknologian Tutkimuskeskus (VTT, Finland) and UAB Biocentras (Lithuania). A sequential combined treatment with HC and flow US could reduce the overall treatment time. Preliminary results showed that cavitational pretreatments carried out with suitable equipment and optimized conditions are competitive with classic steam explosion process. US and HC can be easily scaled up enabling loop or flow-mode processes (see Figure 1). The composition of wheat straw aqueous extracts obtained by treatments with US and/or HC aimed at lignocellulose matrix disintegration was investigated. These treatments developed in the H2020 project US4GreenChem are the first step of a novel biorefinery process that dramatically enhances efficiency of enzymatic hydrolysis of cellulose. A full chemical profile characterization of liquid fraction after wheat straw pre-treatment was performed by UHPLC – ESI-MS/MS methods. This fraction contains several phenolic compounds (52 -120 mg of GAE per g of oven dried sample) which can be considered as value-added products. Moreover, all fractions possess good antioxidant properties (1848-3574  Trolox* equivalent, mmol/g).     Figure 1. HC (left) and high-intensity US reactors (right) for wheat straw pre-treatment.  4. Conclusions  The present work has clearly established the important effect acoustic and hydrodynamic cavitation for the effective treatment of wheat straw in alkaline conditions. The potential economic and environmental impacts of combined technologies will be evaluated for a full valorization of lignocellulosic biomass and the bioconversion to ethanol.  Acknowledgements H2020 Project US4 GREENCHEM (Grant Agreement Number 669055) “Combined Ultrasonic and Enzyme Treatment of Lignocellulosic Feedstock as Substrate for Sugar Based Biotechnological Applications” is warmly acknowledged for the  funds that come from BBI-JU.   References  1 G. Chatel, K. De Oliveira Vigier, F. Jérôme, ChemSusChem, 7 (2014) 2774–2787. 2 M.P. Badve,  P.R. Gogate, A.B. Pandit, L. Csoka, Ultrason Sonochem 21 (2014) 162–168. 3 N. Sarkar, S.K. Ghosh, S. Bannerjee, K. Aikat, Renewable Energy 37 (2012) 19–27.                                                  ROTOCAV (E.PIC S.r.l.) Flow-Multifrequency Reactor   (WEBER Ultrasonics AG) Andritz C3  Separator 

High‐intensity ultrasound and hydrodynamic cavitation as powerful treament for biomass conversion

https://iris.unito.it/bitstream/2318/1660261/1/PA%2027%20Catbior17.pdf

High‐intensity ultrasound and hydrodynamic cavitation as powerful treament for biomass conversion

Abstract

Similar works

Full text

Available Versions

Institutional Research Information System University of Turin