Boccuzzi, Flora

Manzoli, Maela

Menegazzo, F.

Olivo, A.

Pinna, F.

Signoretto, M.

Trevisan, V.

English

Institutional Research Information System University of Turin

 The effects of gold nanosize for the exploitation of furfural by selective oxidation   Francesco Pinna*1, Alberto Olivo1, Valentina Trevisan 1, Federica Menegazzo1, Michela Signoretto 1, Maela Manzoli2, Flora Boccuzzi2   1Department of Molecular Sciences and Nanosystems, Cà Foscari University and “Consorzio INSTM”, Venezia, 30123, Italy 2Department of Chemistry IFM and NIS Centre of Excellence, University of Torino, 10125,Italy *pinna@unive.it  Introduction  A huge challenge for scientists today is to provide the chemical industry with new tools to convert renewables into useful chemicals in an economically viable fashion. For the C5 fraction (xylose) there are no well developed process yet. Furfural can be obtained from xyloses by dehydration in acidic media and it can be used in soil chemistry and as a building block in the production of Lycra®, etc. However, additional transformations of furfural are highly desired: among these, the synthesis of alkyl furoates can open very interesting perspectives for the use of xyloses. Recently it has been shown that furfural can be quite easily converted in methyl furoate by an oxidative esterification with a NaCH3O solution in CH3OH with O2 at 22 °C on a Au/TiO2 reference catalyst purchased by the World Gold Council [1], while in the absence of the base experimental conditions must be strongly raised up [2]. Gold nanoparticles have been recognized as a very good catalyst for selective oxidation with molecular O2 but it’s known that there is a limiting size dividing active from inactive catalysts.  The goal of the present work is to verify the role of the size of gold nanoparticles for Au/ZrO2 samples in the oxidative esterification of furfural, even without the addition of NaCH3O that would make the process less green and more expensive.  Experimental  Au(1.5 wt% )/ZrO2 catalyst was prepared [3] by deposition-precipitation on the calcined support and then treated in air at different temperatures (150°C, 300°C, 500°C, 600°C, 650°C). The oxidative esterification of furfural with oxygen and methanol, without NaCH3O addition, was investigated at 120°C and 12 bar. Fresh and used samples were characterized by N2 adsorption analysis, metal content analysis, HRTEM, FTIR spectroscopy and pulse-flow CO chemisorption. Results/Discussion  The Au/ZrO2 catalyst has been calcined at different temperatures in order to modulate gold nanosize and investigate its role in the oxidative esterification of furfural. A detailed characterization has been carried out in order to verify if micro structural changes occurred. On samples treated at lower temperatures gold clusters have been evidenced by quantitative CO chemisorption and by HRTEM. On the contrary, a thermal treatment at higher temperatures results in the presence of nanoparticles larger than 4nm.          Au/ZrO2 catalysts calcined at temperatures lower than 500°C are very active and selective in the oxidative esterification of furfural, while a drastic decrease in the catalytic performances occours for samples calcined at higher temperatures, as reported in the table.       The limiting size appears related to an intrinsic modification of the electronic structure of Au clusters with respect to nanoparticles. Au clusters, supported on chemically and electronically inert materials, can adsorb and activate O2, presumably by dissociating O2 to yield O adatoms that initiate the partial oxidation. FTIR results on O2-methanol-furfural interaction at room temperature and at 120°C will be showed. Additionally, CO was used to probe the Au sites before and after reaction. Catalysts stability and reusability has been investigated and will be discussed. Financial support by MIUR (Cofin 2008) is gratefully achnowledged. References.  1. E. Taarning, I.S. Nielsen, K. Egeblad, R. Madsen, C.H. Christensen, Chemsuschem, 1, 75 (2008). 2. O. Casanova, S. Iborra, A. Corma, J. Catal. 265,  109 (2009). 3. M. Manzoli, F. Boccuzzi, V. Trevisan, F. Menegazzo, M. Signoretto, F. Pinna, Appl. Catal. B Environ. 96,  28 (2010).  AZS150 AZS300 AZS500 AZS600 AZS650 conversion ( %) 90 90 86 40 24 methyl furoate selectivity ( %) 90 90 88 70 60 

The effects of gold nanosize for the exploitation of furfural by selective oxidation

https://iris.unito.it/bitstream/2318/114230/1/ISOP65.pdf

The effects of gold nanosize for the exploitation of furfural by selective oxidation

Abstract

Similar works

Full text

Available Versions

Institutional Research Information System University of Turin