Hammer, Manfred

Ivanova, Alyona

Stoffer, Remco

van Groesen, Embrecht W.C.

English

A variational method for the fully vectorial mode analysis of lossless dielectric waveguides with piecewise constant rectangular refractive index distributions is proposed

University of Twente Research Information

A Variational Vectorial Mode SolverO.V. (Alyona) Ivanova, Remco Stoffer, Manfred Hammer and E. (Brenny) van GroesenMESA+ Institute for Nanotechnology, AAMP group, University of Twente, The Netherlandso.v.ivanova@math.utwente.nlA variational method for the fully vectorial mode analysis of lossless dielectric waveguides with piecewiseconstant rectangular refractive index distributions is proposed.SummaryAn extension of the scalar Mode Expansion Mode Solver [1] to fully vectorial simulations is dis-cussed. The method uses a six component variational formulation of the Maxwell equations [2] to-gether with approximations of each component of the vector field by specific superpositions of somegiven basis functions, depending on one of the coordinates, times unknown coefficient functions thatare defined on the entire second coordinate axis. In principle there is some freedom in choosing thebasis functions; we use the vector field components of modes of the constituting vertical slices of thewaveguide.It turns out that with our field template the problem of finding the unknown lateral coefficient-functions reduces to finding those, which correspond to only two field components; the computationaleffort becomes comparable to the scalar case [1] or the Film Mode Matching method [3].Just like the scalar approach this method can be used with only a few terms in the expansionfor rough approximations; the technique can then be compared to a semi-vectorial Effective IndexMethod. With a suitable choice of basis fields a reasonable approximation can be achieved with a rel-atively low number of terms. On the other hand, higher order expansions lead to rigorous simulations.Both limits are discussed.The present method can also be seen as a step towards solving the scattering problem in 3D usinga similar approach.Vectorial field profile of the fundamental mode of the box-shaped waveguide from [4]. The Si3N4 (n=1.99) shell aroundthe 0.6×0.6 µm2 SiO2 (n=1.4456) core is 150 nm thick and surrounded by SiO2; the wavelength is 1.55 µm. The effectiveindex is 1.52436.This research was supported by NanoNed, a national nanotechnology program coordinated by the Dutch Min-istry of Economic Affairs.References[1] O.V. Ivanova, M. Hammer, R. Stoffer and E. van Groesen. A variational mode expansion mode solver. Optical and Quantum Electronics, 39,849–864 (2007).[2] C. Vassallo. Optical Waveguide Concepts. Elsevier, Amsterdam, 1991.[3] A.S. Sudbø. Film mode matching: a versatile numerical method for vector mode field calculation in dielectric waveguides. Pure Appl. Opt. 2,211-233 (1993).[4] F. Morichetti, A. Melloni, M. Martinelli, R.G. Heideman, A. Leinse, D.H. Geuzebroek and A. Borreman. Box-shaped dielectric waveguides: a newconcept in integrated optics? Journal of Lightwave Technology, 25 (9), 2579–2589 (2007).

A variational vectorial mode solver

https://ris.utwente.nl/ws/files/5416363/ISH_OWTNM08.pdf

A variational vectorial mode solver

Abstract

Similar works

Full text

Available Versions

University of Twente Research Information